• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.117-123
• /
• 2019

Tall buildings are prone to wind-induced vibrations due to their slenderness whereby peak structural accelerations may be higher than the recommended maximum value. The common countermeasure is the installation of a tuned mass damper (TMD) near the highest occupied floor. Due to the extremely large modal mass of tall buildings and because of the narrow to broad band type of wind excitation the TMD mass may become inacceptable large - in extreme cases up to 2000 metric tons. It is therefore a need to develop more efficient TMD concepts which provide the same damping to the building but with reduced mass. The adaptive TMD concept described in this paper represents a solution to this problem. Frequency and damping of the adaptive TMD are controlled in real-time by semi-active oil dampers according to the actual structural acceleration. The resulting enhanced TMD efficiency allows reducing its mass by up to 20% compared to the classical passive TMD. The adaptive TMD system is fully fail-safe thanks to a smart valve system of the semi-active oil dampers. In contrast to active TMD solutions the adaptive TMD is unconditionally stable and its power consumption on the order of 1 kW is negligible small as controllable oil dampers are semi-active devices. The adaptive TMD with reduced mass, stable behavior and lowest power consumption is therefore a preferable and cost saving damping tool for tall buildings.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.81-87
• /
• 2018

Among various types of geothermal heat pump systems, Vertical Closed-Loop Geothermal Heat Pump (VGSHP) has received increasing attention due to a variety of advantages such as the potential to be installed in a relatively small space and improved energy efficiency. In this research, the performance of VGSHP system coupled with heat storage tank was evaluated, by analyzing operational behavior of heat storage tank, the variations of heat pump energy performance due to the connection with heat storage tank, part load ratios characteristics of heat pump and the corresponding energy cost, compared to chiller and boiler based conventional system. The results of this study showed that the VGSHP system coupled with heat storage tank showed an energy saving effect of about 18% for cooling and about 73% for heating, and annual heating/cooling energy cost reduction of 43,000,000 KRW ($ 39,000), compared to the conventional air conditioning system. In addition, after considering both energy cost and initial investment cost including equipment, installation and auxiliary device expenses, payback period of approximately 11.8 years was required.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.99-106
• /
• 2017

Recently, the condensation and mold problems of apartment buildings has been growing due to high insulation and high air-tightness performance for energy saving. Most of all, occupants in residential buildings has suffered from property damages due to the condensation and mold of built-in furniture. Condensation at built-in furniture were generally found in winter at the of furniture's back panels, adjacent surfaces of wall, floor and ceiling. The aim of paper is to analyze the characteristics of adjacent area around built-in furniture's condensation problem and the thermal environment around the built-in furniture in winter through the field measurements at apartment buildings. In this research, the thermal conditions and surface temperature around the built-in furniture were measured during winter season. In this research, we analyzed thermal conditions for built-in furniture which were applied and not applied auxiliary heating device. In results, it is important to consider increasing surface temperature for using heater and decreasing absolute humidity due to the occupants' behavior around built-in furniture for preventing condensation.

• Coupled systems mechanics
• /
• v.12 no.4
• /
• pp.315-335
• /
• 2023

The building sector has seen a huge increase in the use of lightweight concrete recently, which might result in saving in both cost and time. As a result, the study has been done on various types of concrete, including lightweight (LC), heavyweight (HC), and ordinary concrete (OC), to understand how they react to earthquake loads. The comparisons between their responses have also been taken into account in order to acquire the optimal reaction for various materials in building work. The findings demonstrate that LWC building models are more earthquake-resistant than the other varieties due to the reduction in building weight which can be a curial factor in the resistance of earthquake forces. Another crucial factor that was taken into study is the combination of various types of concrete [HC, LC, and OC] in the structural components. On the other hand, the bending moments and shear forces of LC had reduced to 17% and 19%, respectively, when compared to OC. Otherwise, the bending moment and shear force demand responses in the HC model reach their maximum values by more than 34% compared to the reference model OC. In addition, the results show that the LCC-OCR (light concrete column and ordinary concrete roof) and OCC-LCR (ordinary concrete for the column and light concrete for the roof) models' responses have fewer values than the other types.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.385-392
• /
• 2022

As energy-saving techniques based on human behavior patterns have recently become an issue, the occupant-centered control system is adopted for estimating personal preference of indoor environment and optimizing environmental comfort and energy consumption. Accordingly, IoT devices have been used to collect indoor environmental quality (IEQ) data and personal data. However, the need to safely collect and manage data has been emerged due to cybersecurity issues. Therefore, this paper aims to present a framework that can safely transmit occupant-centered data collected from IoT to a private blockchain server using Hyperledger fabric. In the case study, the minimum value product of the mobile application and smartwatch application was developed to evaluate the usability of the proposed blockchain-based occupant-centered data collection framework. The results showed that the proposed framework could collect data safely and hassle-free in the daily life of occupants. In addition, the performance of the blockchain server was evaluated in terms of latency and throughput when ten people in a single office participated in the proposed data collection framework. Future works will further apply the proposed data collection framework to the building management system to automatically collect occupant data and be used in the HVAC system to reduce building energy consumption without security issues.

• Advances in concrete construction
• /
• v.13 no.2
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.578-585
• /
• 2012

Location tracking system through GPS and Wi-Fi is available at no additional cost in an environment of IEEE 802.11-based wireless network. It is useful for many applications in outdoor environment. However, a previous systems used for general device to tag. It is unsuitable for power aware location tracking system because general devices is more expensive and non-optimized for tracking. The hand-off method of IEEE 802.11 standard is not enough considering power consumption. This thesis analyzes the previous location tracking systems and proposes power aware system. First, we designed and implemented tag to optimize location tracking. Next, we propose low-power hand-off method and low-power behavior model in implemented tag. The proposed hand-off method resolve power problem by using the location information and behavior model minimize power consumption of tag through power-saving mode and the concept of duty cycle. To evaluating proposed methods and system performance, we perform simulations and experiments in real environment. And then, we calculate tag's power consumption based on the actual measured current consumption of each operation. In a simulation result, the proposed behavior model and hand-off method reduced about 98%, 59% than the standard's hand-off and default behavior model.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.405-433
• /
• 2007

This study is conducted to examine how purchase behaviors of consumers have affected by the promotion of coupons in internet shopping mall. This study was conducted with the purpose of identifying the differences in purchase behavior based on consumer' s perception and experience of internet shopping mall coupons, and based on consumers' perception of cost and value of coupons, using a theoretic framework presented in previously conducted studies. The results of this study can be summarized as follows. First, based on the perception of coupons, there were significant differences in intent to use and intent to re-use at the time when coupons are offered, and at the time when coupons are offered, no significant differences were found between the level of interest and the importance of coupon at the time of visiting the shopping mall; however, significant differences were found in the overall purchase behavior based on perception of coupons. Second, when overall differences m purchase behavior based on experience in coupon use was observed, having experience in using coupons showed a higher average than did having no experience in using coupons, showing a significant difference. It was found that compared to those without experience in using coupons, those with experience with coupons had higher intent to use at the time when coupon is offered, intent to re-use at the time when coupon is offered, and higher level of purchase behavior in the importance of coupons at the time of visiting the shopping mall. Third, when relationship between purchase behaviors, cost of coupon, and perception of convenience was observed, a clear static relationship was found. This suggests that as the cost and perception of convenience of coupon increases, purchase behavior also increases. Such result suggests that there is a difference in purchase behavior based on experience in coupon use. When relationship of purchase behavior by variables of cost of coupon and perception of convenience is observed, it has a positive relationship with the perception that the use of coupon includes saving money, financial help, enjoyment of use, habitual use, has a short effective date, and has a negative relationship with the perception that it saves little money and is a waste of time. Therefore, it can be seen that purchase behavior has the highest relationship with enjoyment of coupon use and habitual coupon use. Such results suggest that purchase behavior will be significantly influenced based on cost of coupon and perception of convenience.

• Journal of Korean Home Economics Education Association
• /
• v.27 no.1
• /
• pp.67-83
• /
• 2015

The purpose of this study was to explore the levels of ethical consumptions and related variables on ethics of adolescents as consumers. This subjects were 552 middle and high school students. The research results are summarized as follows. 1. The scores to measure ethical consumptions level of the adolescents was ranged from 2.87 to 3.08, which were relatively low. 2. The ethical consumptions(fair-trade product consumption, donation and giving, local consumption and eco-friendly consumption) in demographic variables were found to have significant differences depending on their religion, perceived social class, father's education and mother's education. 3. The result of hierarchical regression analysis indicated that consumer education experience, the eco-friendly values, materialism, saving, experiencing mass media on affecting the fair-trade product consumption. The major variables affecting the ethical consumptions in the donation and giving were materialism, consumer education experience, experiencing mass media and the eco-friendly values. The significant variables affecting the local consumption were the eco-friendly values, consumer education experience, materialism, experiencing mass media and saving. The major variables affecting the eco-friendly consumption were the eco-friendly values materialism.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.403-409
• /
• 2016

This study is a food shopping experience of omni-channel. Food threats and healthy living concerns bring different channels in led to increase reasonable way such as various demand. Omni-channels should be premised on understanding customer behavior as well as empirical user types in which considerations including the value of experience and understanding consumer behavior. Online survey result showed that, (1)offline food shopping, major retail store with quality, buy fresh food directly 2~3 times a month (2)online food shopping, e-commerce site with costs, buy fruits & nuts 2~3 times a month. After in-depth interview with eight high quality participants, I analyzed needs for food shopping experience in regard to the four steps food purchasing journey then derived a persona with integral value 'health' and 'diet'. It is classified into two types. One is the primary persona, family and health oriented, considering household money 'saving', and other is secondary persona, work and personal oriented, looking forward to 'automatic supply'. The result of this study provided an insight that help us explore ways to resolve function and services in the context of a healthy and balanced diet for improving food shopping experience of omni-channel.