• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.105-112
• /
• 2018

Global environmental problems are growing, and the importance of buildings with high energy consumption has been emphasized. In Korea, the Ministry of Land, Transport and Maritime Affairs has been promoting the mandatory zero energy building since 2020, and guidelines related to the zero energy building have been developed. In addition, based on the "Energy-saving Design Criteria for Buildings" of the "Green Building Promotion Act" in Korea, the standards for energy-saving design are specified and the energy saving plan is written. Besides, the 'Energy-saving construction standards for eco-friendly houses' also specify insulation, machinery, equipment, and sunshade. Also, there is little consideration about the cost such as construction cost and material cost which should be considered important in the construction stage. Therefore, this study aims at analysis of building type and energy performance versus materials for energy saving building design considering energy performance in planning aspect of initial design stage. In this study, because the variables can not be neglected in this study, it is selected as the lecture facility of the 'K' university campus building which can consider the remaining factors except the passive design element as the control variable, Energy performance analysis.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.294-299
• /
• 2013

In many urban cities, super-tall buildings have been being constructed around New York and Chicago as the center since 1930 to improve the efficiency of land use and respond to new residential type. In terms of energy consumption, super-tall buildings are classified as a top energy consumption building. Also, as time passed, the degradation of energy performance occurs in super-tall buildings like general things so that these cannot show the initial performance planned in the design phase. Accordingly, building owners need to make a plan to apply energy saving measures to existing building during the operation phase. In order to select energy saving measures, calculus-based methods and enumerative schemes have been typically used. However, these methods are time-consuming and previous studies which used these methods have problems with not considering the initial construction cost. Consequently, this study proposes a model for selecting an optimal combination of energy saving measures which derives maximum energy saving within allowable cost using genetic algorithms. As a contribution of this research, it would be expected that a model is utilized as one of the decision-making tools during the planning stage for energy saving.

• Journal of Families and Better Life
• /
• v.14 no.3
• /
• pp.211-222
• /
• 1996

The purpose of this study is to classify the expenditure behaviors of housewives into some types and to identify the characteristics of the types focucing on diverse expenditure behaviors of urban households. In this study it is assumed that the expenditure behaviors are classified by there factors-(1)the orientation of money saving (2)the orientation of time saving and (3)the orientation of others. The present study suggests following three questions. (1). Can the expenditure behaviors of urban housewives be classified according to the orientation of money saving the orientation of others? (2) What distictions exist among the types? (3) Which variables are useful in classifying the expenditure behaviors? For empirical analysis the data of the study was collected from 650 housewives living in Seoul. The statistical methods adopted for data analysis are frequency percentage mean Pearson's correlation coefficient factor analysis cluster analysis one way ANOVA Duncun's multiple ran e test and discriminant analysis. As the major findings 4 types were extracted, According to the level of each dimensions the names for the each type were given as "the type of attaching importance to money saving" "the type of attaching importance to time and appearance" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and appearance" In "the type of attaching importance to money saving" the significant portion of housewives have high school degrees and compared with other types this type includes more husbands having sales and service job 55% of housewives of "The type of attaching importance to time and appearance" have graduate or higher degrees. The significant part of earned incomes range from 3 million won to 5 million won. The rate of housewives employed in the professional job is higher than other types. In "The type of attaching importance to money saving and time" the rate of the employment of housewives in this type is the highest among the types. In "The type of attaching importance to money saving and appearance" the significant portion of housewives have graduate degrees. In the jobs of he spouses the management job is major. The consciousness of belonging to the middle class is higher than other types. In this type the level of education is high but that of income is not. The result of the discriminant analysis says that the earned income and the consciousness of belonging to a calss are the most critical variables to classify the expenditure behaviors into 4 type The accuray of the classification of the discrimination equation composed of these variables is 47,5% The accuracy is improved by 10%.

• Journal of the Korean housing association
• /
• v.22 no.6
• /
• pp.31-42
• /
• 2011

The purpose of the study was to investigate the characteristics of energy use behaviors and energy saving consciousness of multi-family housing residents. The energy referred to in this study includes electric energy, heating energy and water usage. This study was conducted from a survey carried out in Seoul and Gyeonggi-do. The results of the study are as follows: First, among the survey questions, the only positive energy saving behaviors shown by the occupants was turning off the lights and the television, and in the use of kitchen appliances; it could therefore be concluded that, in general, energy saving attitude and consciousness were not sufficient to reduce energy consumption. Second, the results showed high mean scores for the behaviors which were easy to control, such as turning off lights and televisions, and low mean scores for the behaviors which required extra effort to completely cut off electricity energy such as pulling out the plugs of electronic appliances. Third, it was found that the occupants generally showed the tendency to save heating energy. However, in cases where the occupants were required to continuously and directly experience indoor temperatures, they expressed passive attitudes toward saving energy. Fourth, they showed wasteful attitudes toward water usage by leaving the tap running when taking showers and washing their faces. Fifth, while they showed a strong energy saving consciousness, they also showed a passive attitude about putting this into practice; there was therefore some gap between attitude and behavior. Lastly, among the socio-demographic factors, age and family lifecycle were very important factors affecting energy use and energy saving consciousness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.649-658
• /
• 2009

Due to limited size and limited battery lifetime of sensor node, one has to address the power saving issue in wireless sensor network. The existing power saving algorithm based on data reuse was proposed for the cluster structured wireless sensor network. We state the problem of existing power saving algorithm and propose new power saving algorithm for tree structured wireless sensor network. The proposed algorithm reduces power consumption by buffering the sensed data at the selected relay node for its data lifetime. The optimum buffering node is selected so that the power saving gain is maximized and at the same time, power consumption among sensor nodes are equally distributed in the network. With computer simulations, it is shown that the proposed algorithm outperforms the conventional algorithm in terms of power saving gain.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.1
• /
• pp.71-79
• /
• 2022

Recently, alarming rates of climate change have amplified the importance of water conservation in the agricultural sector; emphasizing the implementation of an integrated approach as the principal water management strategy. As part of comprehensive measures to cope with drought in the agricultural and rural sectors, water-saving education models and pilot projects for farmers' education have been implemented since 2016, but these activities were launched as a one-time project in limited areas. Therefore, systematic and extensive efforts are required to highlight the site-specific and tangible benefits of water-saving education and public relations projects. As part of this study, educational sessions and surveys were conducted in the Yeoju-Icheon, Seosan-Taean, and Gyeongju areas to reflect the on-site applicability of the water-saving education model. Based on the survey of previous studies, a total of 16 water-saving effectiveness factors were developed and the effectiveness was derived for each factor. As a result of farmer education, the overall effectiveness evaluation score of 1.13 increased to 3.34, and the effectiveness of each factor was also improved. These water-saving education effectiveness factors can be used as basic data for determining and launching future policies or systems to improve the water-saving education of farmers. In addition, this study raises the need to prepare feasible related systems that can lead farmers to actively participate in water management and conservation and to promote systematic and continuous water conservation education and promotion policies.

• Journal of Family Resource Management and Policy Review
• /
• v.6 no.1
• /
• pp.87-102
• /
• 2002

The purpose of this study was to investigate the trends of saving rates in households (1982-1998). That has increased approximately 50% in all classes and have changed in according to economic development, price indices and economic situations. Demographic characteristics such as income, age and number of family members were the variables which show the differences in saving rates.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.1-5
• /
• 2012

A complex energy saving device has been developed for middle class vessels. The propulsive performance of the developed device is described through a model test. The pre-swirl stator, which recovers the rotational energy of the propeller slipstream, is a well-known energy saving device for large vessels. The pre-swirl stator for a large vessel is usually cast as a part of the stern frame and has a high cost. The manufacture of a cast stator for an existing vessel is almost impossible. The complex device that was developed can be fitted on astern frame by welding. The model tests show a 4-6% efficiency gain for middle class vessels with the developed appendages compared to those with bare hulls.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.376-379
• /
• 2001

This paper describes the design and fabrication process of super water-saving toilet bowl system by the theory of inventive problem solving (TRIZ). The physical contradiction in TRIZ is defined to obtain the conceptual design for saving water in toilet bowl system with preventing the bad smell from septic tank. The super water-saving toilet bowl system is obtained by using the separation principle in time for resolving the physical contradiction. The consumption of water in the prototype system fabricated, is estimated about $3{\ell}$ comparing with $13{\ell}$ of that in conventional toilet bowl system. The noise from water in the prototype toilet bowl system is decreased by 1/3 of that in conventional toilet bowl system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.3
• /
• pp.335-340
• /
• 2011

Building energy saving is one of the most important issues in these days. Control algorithm for energy saving should be designed properly to reduce power consumption in building. Recently, building energy system consists of hybrid energy system coupling with RE (Renewable Energy) source. In this paper, an optimum control algorithm for building energy saving is applied to BEMS (Building Energy Management System) by using an outdoor air temperature prediction strategy. BEMS coupling with renewable energy can control HVAC (Heating, Ventilating and Air-Conditioning) system effectively. In order to verify the effectiveness of building energy saving, BEMS was tested for several months at a laboratorial chamber with an air conditioner, fan and heater. To this end BEMS embedded control algorithm has been tested successfully.