• 지구물리와물리탐사
• /
• 제18권3호
• /
• pp.105-114
• /
• 2015

상온 상습 환경에서 수포화 암석코어의 전기비저항을 장시간 모니터링 할 수 있는 장치를 구현하였다. 양쪽 금속망 전극에 덧댄 종이필터와 암석코어를 감싼 열수축튜브의 상부 중앙 외피면에 3-채널 펌프로 물을 충분히 공급하면서 전기저항을 측정하면 암석코어의 수포화 상태를 유지하면서 일주일 이상 전기비저항을 모니터링 할 수 있다. 이 장치를 이용하여 흑운모 편마암, 안산암질 응회암, 셰일의 3종류 암석코어의 수포화 전기저항을 9일간 모니터링 한 결과 다음과 같은 2가지 가설을 제시할 수 있었다. 즉, 전기비저항 온도계수의 수렴 속도는 열물성과 관련이 있을 것이라는 것과 건조 저항을 수포화 때의 평균 저항으로 나눈 건조/수포화 저항비는 유효공극률과 상관될 것이라는 것이다. 실제로, 3가지 암석의 건조/수포화 저항비는 각각 48, 705, 2로 나타났고 이때 각각의 유효공극률은 3.7%, 3.3%, 13.0%이었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.847-854
• /
• 2004

The resistivity of soils depends on grains size, porosity, water saturation, pore fluid resistivity, caly contents and son on. It is very important to understand the relationship between resistivity and such physical properties of soils, in order to interpret and evaluate ground conditions by using resistivity data obtained from electrical resistivity prospecting. In this paper, to study the relationship between resistivity and physical properties of soils, the resistivity of glass beads and compacted soil samples both in saturated and unsaturated conditions is measured. As the results, the resistivity of saturated soils depends mainly on porosity and clay contents, while that of unsaturated soils is sensitive to compaction conditions, and decreases with increasing water content until the optimum water condition, that is the maximum dry density. But, the relationship between resistivity and water saturation for soils is unique, being independent of compaction energy. Also, the resistivity ratio decrease with increasing water saturation, followed by no significant change of resistivity ratio over 80 percent of water saturation (the optimum water content).

• Computers and Concrete
• /
• 제15권6호
• /
• pp.973-987
• /
• 2015

The electrical resistivity of air-dried, saturated, and carbonated concretes with different mixture proportions was monitored to evaluate and quantify the influence of the age of the specimen, carbonation, and curing condition. After 28 days of curing, four prepared specimens were stored in a vacuum chamber with 5% $CO_2$ for 330 days to make carbonated specimens. Four of the specimens were placed in water, and four specimens were cured in air until the end of the experiments. It was observed that the electrical resistivity of the carbonated specimens increased as carbonation progressed due to the decrease of porosity and the increase of hydrated products. Therefore, in order to estimate the durability of concrete, its carbonation depth was used as the measurement of electrical resistivity. Moreover, an increase of electrical resistivity for air-dried and saturated concretes was observed as a function of age of the specimen. From the relationship between chloride diffusivity provided by Yoon et al. (2007) and the measurements of electrical resistivity, it is expected that the results well be of significant use in calibrating chloride diffusivity based on regular measurements of electrical resistivity during concrete construction.

• 지구물리와물리탐사
• /
• 제18권4호
• /
• pp.171-180
• /
• 2015

울릉도 지열조사 시추공에서 채취한 암석코어 중 약 20 m 간격으로 수집한 23개의 코어시료에 대하여 수포화 전기비저항과 건조 전기비저항, 건조밀도와 유효공극률을 측정하고, 암석코어 별 전기비저항 범위를 제시하였으며 물성간 상관성을 분석하였다. 암석코어의 건조과정 말미에 질소가스를 주입함으로써 습기의 공극내 유입 및 흡착을 지연시켜 건조 전기비저항을 측정할 수 있는 전처리 방법을 고안하였다. 측정된 물성 상호간의 상관성을 분석한 결과, 울릉도 암석코어의 건조밀도는 유효공극률과 매우 높은 상관성을 보였는데, 특히 '건조밀도 감소에 대한 유효공극률 증가율'이 암종에 따라서 큰 차이를 보여서 현무암질 화산쇄설암이 가장 크고 조면암질 화산쇄설암, 조면암의 순으로 작아진다. 따라서 울릉도 암석코어는 건조밀도와 유효공극률의 상관성 분석만으로도 암종 구별이 용이한 특징을 나타내었다. 수포화 전기비저항은 유효공극률 및 건조 밀도와 매우 높은 상관성을 보이는 반면 건조 전기비저항은 이들과 특별한 상관관계를 찾을 수 없었다.

• 대한토목학회논문집
• /
• 제29권3C호
• /
• pp.127-136
• /
• 2009

본 연구의 목적은 포화지반의 전기적 특성파악을 위한 4전극 전기비저항 프로브(4-Electrode Resistivity Probe: 4ERP)의 개발과 검증이다. 4ERP는 웨너 배열을 적용하여 전극에서 분극작용 없이 전기비저항을 산정할 수 있도록 쐐기형과 평면형으로 제작되었다. 쐐기형은 지반속에 관입하기 위한 용도이며 평면형은 실내실험시 사용되는 셀등에 설치하기 위한 것이다. 크기가 다른 6종류의 글라스비드와 3종류의 모래를 사용하여 압밀시험을 수행한 결과, 간극률이 감소함에 따라 전기비저항이 증가하였으며, Arichie 공식에 사용되는 m값이 입자의 크기보다 형상에 영향을 받는 것으로 나타났다. 액상화 수조에서 수행된 실험결과 체적간극률과 유사한 전기비저항 간극률이 산정되었다. 대형 토조에서 수행된 관입실험으로부터 간극률 주상도를 얻을수 있었다. 본 논문에서 제시된 4ERP는 포화 지반의 간극률을 효과적으로 산정할 수 있는 장비가 될 수 있을것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.728-731
• /
• 2006

Ground subsidence near abandoned underground coal mines has become a serious social problem in Korea. The purpose of this study is to perform a comparative analysis between the ground subsidence area and the electrical resistivity measured by field survey at Samcheok City. A raster database composed of ground subsidence areas and electrical resistivity data was constructed for GIS. To analyze correlation between the two constructed raster datasets, we used a frequency ratio model. The results show that low and high electrical resistivity anomaly zones coincide with the existing subsidence areas. We infer that the high anomaly zone means saturated and low anomaly zone means vacant. It suggests that electrical resistivity might be a useful factor for analyzing ground subsidence hazard zone.

• 지질공학
• /
• 제18권4호
• /
• pp.423-431
• /
• 2008

충적층의 구성물질 중에서 포화된 실트 또는 점토층은 다른 층들에 비해 상대적으로 낮은 전기비저항 값을 나타낸다. 따라서 자료해석에 있어서 실트 및 점토층이 전기비저항이 작고 투수성이 높은 대수층으로 오인될 수 있다. 본 연구에서는 이러한 문제를 극복하고 충적층 내 포화된 실트 또는 점토층과 모래 또는 자갈 대수층을 구분하기 위해 충적층을 구설하고 있는 물질의 전기비저항 및 유도분극 값을 함께 측정하는 실내실험을 실시하였다. 실험결과 실트 또는 점토시료가 모래시료보다 충전성이 높게 나타났으며, 또한 모래와 점토 혼합시료에서 점토함량이 증가함에 따라 전기비저항은 감소하고 충전성은 증가하다가 다시 감소하는 경향을 보였다.

• 한국결정성장학회지
• /
• 제18권4호
• /
• pp.137-139
• /
• 2008

Floating zone, neutron transmutation-doped and magnetic Czochralski silicon crystals are being widely used for fabrication power devices. To improve the quality of these devices and to decrease their production cost, it is necessary to use large-diameter wafers with high and uniform resistivity. Recent developments in the crystal growth technology of Czochralski silicon have enable to produce Czochralski silicon wafers with sufficient resistivity and with well-controlled, suitable concentration of oxygen. In addition, using Czoehralski silicon for substrate materials may offer economical benefits, First, Czoehralski silicon wafers might be cheaper than standard floating zone silicon wafers, Second, Czoehralski wafers are available up to diameter of 300 mm. Thus, very large area devices could be manufactured, which would entail significant saving in the costs, In this work, the conventional Czochralski silicon crystals were grown with higher oxygen concentrations using high pure polysilicon crystals. The silicon wafers were annealed by several steps in order to obtain saturated oxygen precipitation. In those wafers high resistivity over $5,000{\Omega}$ cm is kept even after thermal donor formation annealing.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.49-55
• /
• 2006

Compressional wave velocity (Vp), shear wave velocity (Vs), elastic and physical properties, and electrical resistivity for two core sediments obtained from Southeastern Yellow Sea Mud (SEYSM) were measured and computed. The sediments consist of homogeneous mud (mostly silt and clay) with shells and shell fragments. As a result, the mean grain size is uniform ($7.5-8.5{\Phi}$ throughout the core sediments. However, physical properties such as wet bulk density and porosity show slightly increasing and decreasing patterns with depth, compared to the mean grain size. The compressional (about 1475 m/s in average) and shear wave (about 60 m/s in average) velocities with depth accurately reflect the pattern of wet bulk density and porosity. Electrical resistivity is more closely correlated with compressional wave velocity than physical properties. The computed Vp/Vs and Poisson's ratios are relatively higher (more than 10) and lower (approximately 0.002) than Hamilton's (1979) data, respectively, suggesting the typical characteristics of soft and fully water-saturated marine sediments. Thus, the Vp/Vs ratio in soft and unconsolidated sediments is not likely sufficient to examine lithology and sediment properties. Relationships between the elastic constant and physical properties are correlated well. The elastic constants (Poisson's ratio, bulk modulus, shear modulus) given in this paper can be used to characterize soft marine sediments saturated with seawater.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.640-644
• /
• 2003

NiCr thin films were fabricated by rf magnetron sputtering for applying to both the top electrode and absorption layer on Pb(Zr, Ti)O$_3$(PZT) thin films for infrared sensors. The rms roughness and resistivity of NiCr films prepared with Ni power of 80 W and Cr power of 50 W showed the most stable oxidation resistance after annealing at $600^{\circ}C$ for 5 min in oxygen ambient. The rms roughness and resistivity of NiCr films annealed at $V^{\circ}C$ in oxygen ambient were about 2$0\AA$ and $70 \mu$Ω-cm, respectively. As-deposited Ni/PZT/Pt and NiCr (Ni 80 W, Cr 50 W)/PZT/Pt structures showed well saturated hysteresis loops. However, in case of the samples annealed at $500^{\circ}C$ in oxygen ambient, only NiCr/PZT/Pt showed saturated loops having a remanent polarization of 20$\mu$C/$\textrm{cm}^2$. Ultra-thin NiCr films showed a possibility as a top electrode for infrared sensors.