• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1521-1528
• /
• 2000

In this paper we analyze the performance of a DS/CDMA system in LEO mobile satellite channels. The channel uses the Extended Suzuki model which is the product of a Rician distribution having a LOS component and a lognormal distribution due to shadowing. We assume that the signal transmitted from the satellite to the mobile undergoes the same fading for the whole coverage of signal's beam. The average bit error probabilities of double coverage system is calculated in this paper. The interference resulting from the reference satellite is calculated for mobile located in the middle of the double coverage region whereas the additive interference from next-satellite is included for mobile located in the edge of the double coverage region. The performance of the mobile's receiving signal is dependent on shadowing and the interference of the next-satellite. We can obtain an obtain an improved average bit error probability by using dual diversity over the conventional correlated receiver for similar shadowing conditions in the coverage area of the satellite channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.722-729
• /
• 2004

To analysis on the degradation of the satellite communication signal due to Asian dust that appeared on Korean peninsula during March and April 2004, EIRPs of L, S, C, Ku and Ka frequency bands of the downlink of satellite communication link were measured by Satellite Signal Monitoring Center located in Icheon, Korea. The measured EIRP values were compared to the total dust density and dust particle distribution that were measured using PM 10 and OPC by the Korea Meteorological Administration, and the possible correlation between three sets data were analyzed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.399-404
• /
• 2004

Recently GPS has been playing an increasingly important role in geodesy and positioning, for example, car navigation system, surveying, ITS(intelligent transport systems), LBS(Location Based Service) and so on. For telematics application, reception conditions of GPS signal are important. In some situation, such as in areas between buildings, metropolitan areas or areas with large skyscraper complexes, there are situations whereby the satellite signal is seriously restricted by various obstacles. Before the signal arrives at the receiver, it may be blocked, reflected, delayed, attenuated or scattered by terrestrial obstacles such as buildings. In this paper, we present satellite imagery data for telematics application. Therefore, for propriety of this studies, we made a GPS satellite visibility experiments in Bun-Dang on same time. This paper describes an approach to calculate building level using 0.6m, 1m, 6.6m resampling aerial polo imagery in stead of the satellite imagery and make a comparative study of accuracy. This paper tests the simulation of GPS signal using the building level.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.3
• /
• pp.99-105
• /
• 2014

A graphic processing unit (GPU) can perform the same calculation on multiple data (SIMD: single instruction multiple data) using hundreds of to thousands of special purpose processors for graphic processing. Thus, high efficiency is expected when GPU is used for the generation and correlation of satellite navigation signals, which perform generation and processing by applying the same calculation procedure to tens of millions of discrete signal samples per second. In this study, the structure of a GPU-based GNSS simulator for the generation and processing of satellite navigation signals was designed, developed, and verified. To verify the developed satellite navigation signal generator, generated signals were applied to the OEM-V3 receiver of Novatel Inc., and the measured values were examined. To verify the satellite navigation signal processor, the performance was examined by collecting and processing actual GNSS intermediate frequency signals. The results of the verification indicated that satellite navigation signals could be generated and processed in real time using two GPUs.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.28-35
• /
• 2022

Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.71-76
• /
• 2015

In this paper, we developed the hardware GPS signal generator for generating a satellite navigation signal synchronized with Live GPS signal signals and analyzed the performance of signal genterator thorough the experiment For a hardware implementation of the GPS navigation signal synchronous generator, the GPS module may receive a GPS signal in order to generate the same signal as the operation that is transmitted from the current GPS satellite and the synchronized time information and the GPS satellites using the Novatel Inc. OEMStar.In. For generating the GPS synchronization signal, the GPS navigation signal generator was adjusted to a reference clock using the GPS clock synchronous information provided by the GPS receiving module and GPS signals also generated in consideration of the delay of the internal hardware of the generator. In this paper, we analyzed the effect of the receiver via the signal switching between Live GPS signal and generates a signal to measure the performance of the GPS navigation synchronization signal generator. It was confirmed that by the seamless operation of the signal even the moment that the switching of the generated signal from Live GPS signal has occurred through experimentation.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.88-93
• /
• 2013

The wideband chirp signal generator to enhance the resolution of synthetic aperture radar of obtaining the earth observation image is needed. This paper deals with designing, manufacturing and testing the wideband digital chirp signal generator having high resolution for LEO earth observation satellite. The wideband digital chirp signal generator is implemented with the memory-map based structure which is mostly applied in the satellite, and consists of the digital module to generate the digital chirp signal and the RF module to perform the quadrature modulation. The I/Q signals stored in the memory of the digital module are D/A converted and delivered to be quadrature modulated with the reference signal of 1275 MHz in the RF module. Furthermore, the test bench and GUI to validate the signal generator function are also developed. It is found that the requirement of 144 MHz bandwidth for the digital chirp signal generator is well met. Finally it is noteworthy that the distortion occurred in the chirp signal generator was compensated by the pre-distortion compensation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.762-768
• /
• 2016

In this paper, a method for generating ranging signal to reduce the effects of interference and overcome intentional jamming is proposed in slow frequency hopping(SFH) communication system. A terminal uses ranging signal for initial Up-link synchronization in the frequency hopping communication systems using multi-terminal. However, ranging signal generated by unsynchronized terminal acts as an interference signal to another terminal. Therefore, we propose the design of the ranging signal with PN sequence in order to minimize the affection to the other terminal and simulated its performance. From the simulated result, we confirm synchronization performance.