• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.201-208
• /
• 2019

Numerical integration is necessary for satellite orbit determination and its prediction. The numerical integration algorithm can be divided into single-step and multi-step method. There are lots of single-step and multi-step methods. However, the Runge-Kutta method in single-step and the Adams method in multi-step are generally used in global navigation satellite system (GNSS) satellite orbit. In this study, 4th and 8th order Runge-Kutta methods and various order of Adams-Bashforth-Moulton methods were used for GLObal NAvigation Satellite System (GLONASS) orbit integration using its broadcast ephemeris and these methods were compared with international GNSS service (IGS) final products for 7days. As a result, the RMSE of Runge-Kutta methods were 3.13m and 4th and 8th order Runge-Kutta results were very close and also 3rd to 9th order Adams-Bashforth-Moulton results. About result of computation time, this study showed that 4th order Runge-Kutta was the fastest. However, in case of 8th order Runge-Kutta, it was faster than 14th order Adams-Bashforth-Moulton but slower than 13th order Adams-Bashforth-Moulton in this study.

• 한국통신학회논문지
• /
• 제25권5A호
• /
• pp.641-650
• /
• 2000

톤 방식을 사용하는 저궤도 위성 거리 측정에서 링크 잡음과 도플러 영향을 분석하고, 다목적 실용위성과 거리측정 시스템에 적합한 거리 측정 검출부의 운용 잡음 대역폭을 제안하였다. 저궤도 위성의 운동 특성을 통한 궤도 파라미터별 영향과 거리 측정 신호의 신호대 잡음 스펙트럼 밀도를 구하여 잡음과 도플러의 영향을 분석하였다. 위성 링크 잡음의 영향은 거리 신호 검출부 PLL 대역폭이 낮을수록 작으나, 도플러에 의한 영향은 PLL 대역폭이 클수록 작아진다. 다목적 실용위성의 거리 측정 시스템에서 적용하여 측정한 결과와 위성 궤도 특성을 모델링하여 모의 실험한 거리 측정 시스템의 분석 결과를 통하여 저궤도 위성의 거리 측정에 대한 도플러와 잡음의 영향 분석에 대한 타당성을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.578-581
• /
• 2006

Usually to achieve precise geolocation of satellite images, we need to get GCPs (Ground control points) from individual scenes. This requirement greatly increases the cost and processing time for satellite mapping. In this article, we focus on finding appropriate sensor models for entire image strips composing of several adjacent scenes. We tested the feasibility of modelling whole satellite image strips by establishing sensor models of one scene with GCPs and by applying the models to neighboring scenes without GCPs. For this, we developed two types of sensor models: collinearity-based type and orbit-based type and tested them using different sets of unknowns. Results indicated that although the performance of two types was very similar, for modelling individual scenes, it was not for modelling the whole strips. Moreover, the performance of sensor models was remarkably sensitive to different sets of unknowns. It was found that the orbit-based model using attitude biases as unknowns can be used to model SPOT image strips of 420 Km in length.

• 항공우주정책ㆍ법학회지
• /
• 제9권
• /
• pp.421-433
• /
• 1997

The orbit and frequency spectrum allocation for the communication and broadcasting satellite services are coordinated between the concerned parties according to the Radio Regulations of International Telecommunication Union (ITU). Currently, the geostationary orbit is filled with too many satellites for the commercial or military uses. In addition, a number of near earth satellite programs are being introduced. As each country claims for the space orbit and spectrum, the limited space resources are being exhausted. In this paper, the current situations in the worldwide satellite orbit demand are discussed, and some ideas on the peaceful, efficient and equitable use of space resources are proposed.

• 항공우주기술
• /
• 제10권2호
• /
• pp.170-176
• /
• 2011

본 논문에서는 지상국에서 추적한 저궤도 위성의 방위각 및 고도각을 관측자료로 이용하여 궤도결정을 수행한 결과를 분석하였다. 지상국 추적 데이터는 발사 후 초기 궤도결정을 위한 관측자료로 유용하게 사용된다. 이를 위해 지상국 추적데이터에 대한 표준 인터페이스 포맷을 정리하였고, 특정 지상국에 대한 추적 데이터의 통계적인 특성을 살펴보았다. 최소자승법을 이용한 궤도결정을 위해 연속되는 교신패스를 통해 얻은 아리랑 2호의 방위 각/고도각을 축적하여 관측자료로 이용함으로써 다양한 조합에 따른 궤도결정 결과를 분석하였고, 궤도결정 성능 검증을 위해 GPS 항행해를 이용한 궤도결정 값과 비교하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2007년도 한국우주과학회보 제16권2호
• /
• pp.89.1-89.1
• /
• 2007

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.87-90
• /
• 2005

The FORMOSAT-3/COSMIC mission is a micro satellite mission to deploy a constellation of six micro satellites at low Earth orbits. The final mission orbit is of an altitude of 750-800 lan. It is a collaborative Taiwan-USA science experiment. Each satellite consists of three science payloads in which the GPS occultation experiment (GOX) payload will collect the GPS signals for the studies of meteorology, climate, space weather, and geodesy. The GOX onboard FORMOSAT -3 is designed as a GPS receiver with 4 antennas. The fore and aft limb antennas are installed on the front and back sides, respectively, and as well as the two precise orbit determination (POD) antennas. The precise orbit information is needed for both the occultation inversion and geodetic research. However, the instrument associated errors, such as the antenna phase center offset and even the different cable delay due to the geometric configuration of fore- and aft-positions of the POD antennas produce error on the orbit. Thus, the focus of this study is to investigate the impact of POD antenna parameter on the determination of precise satellite orbit. Furthermore, the effect of the accuracy of the determined satellite orbit on the retrieved atmospheric and ionospheric parameters is also examined. The CHAMP data, the FORMOSAT-3 satellite and orbit parameters, the Bernese 5.0 software, and the occultation data processing system are used in this work. The results show that 8 cm error on the POD antenna phase center can result in ~8 cm bias on the determined orbit and subsequently cause 0.2 K deviation on the retrieved atmospheric temperature at altitudes above 10 lan.

• Journal of Astronomy and Space Sciences
• /
• 제17권2호
• /
• pp.249-256
• /
• 2000

It has been developed to calculate fuel budget for a geostationary communication and broadcasting satellite. It is quite essential that the pre-launch fuel budget estimation must account for the deterministic transfer and drift orbit maneuver requirements. After on-station, the calculation of satellite lifetime should be based on the estimation of remaining fuel and assessment of actual performance. These estimations step from the proper algorithms to produce the prediction of satellite lifetime. This paper concentrates on the fuel estimation method that was studied for calculation of the propellant budget by using the given algorithms. Applications of this method are discussed for a communication and broadcasting satellite.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.217-220
• /
• 2005

Currently, a number of control points are required in order to achieve accurate geolocation of satellite images. Control points can be generated from existing maps or surveying, or, preferably, from GPS measurements. The requirement of control points increase the cost of satellite mapping, let alone it makes the mapping over inaccessible areas troublesome. This paper investigates the possibilities of modeling an entire imaging strip with control points obtained from a small portion of the strip. We tested physical sensor models that were based on satellite orbit and attitude angles. It was anticipated that orbit modeling needed a sensor model with good accuracy of exterior orientation estimation, rather then the accuracy of bundle adjustment. We implemented sensor models with various parameter sets and checked their accuracy when applied to the scenes on the same orbital strip together with the bundle adjustment accuracy and the accuracy of estimated exterior orientation parameters. Results showed that although the models with good bundle adjustments accuracy did not always good orbit modeling and that the models with simple unknowns could be used for orbit modeling.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.588-590
• /
• 2003

For the normal operations, KOMPSAT-1 orbits are determined using GPS navigation solutions data such as position and velocity vectors. Currently, the accuracy of GPS navigation solution data is generally known as on the order of 10~30 m with the removal of S/A. In this paper, an estimate of the current orbit determination accuracy for the KOMPSAT-1 is given. For the evaluation of orbit determination accuracy, the orbit overlap comparison is used since no independent orbits of comparable accuracy are available for comparison. As a result, It is shown that the orbit accuracy is on the order of 5 m RMS with 4 hrs arc overlap for the 30 hr arc.