• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.37-44
• /
• 2014

A detailed satellite panel thermal model composed of more than thousands nodes can not be directly integrated into a spacecraft thermal model due to its node size and the limitation of commercial satellite thermal analysis programs. For the integration of the panel into the satellite thermal model, a reduced thermal model having proper accuracy is required. A thermal model reduction method was developed and validated by using a geostationary satellite panel. The temperature differences of main components between the detailed and the reduced thermal model were less than $1^{\circ}C$ in steady state analysis. Also, the dynamic responses of the detailed and the reduced thermal model show very similar trends. Thus, the developed reduction method can be applicable to actual satellite thermal design and analysis with resonable accuracy and convenience.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.407-412
• /
• 2010

Software reusability is one of key factors which impacts cost and schedule on a software development project. It is very crucial also in satellite simulator development since there are many commercial simulator models related to satellite and dynamics. If these models can be used in another simulator platform, great deal of confidence and cost/schedule reduction would be achieved. Simulation model portability (SMP) is maintained by European Space Agency and many models compatible with SMP/simulation model interface (SMI) are available. Korea Aerospace Research Institute (KARI) is developing hardware abstraction layer (HAL) supported satellite simulator to verify on-board software of satellite. From above reasons, KARI wants to port these SMI compatible models to the HAL supported satellite simulator. To port these SMI compatible models to the HAL supported satellite simulator, simulation scheduler is preliminary designed according to the SMI standard.

• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1038-1043
• /
• 2002

The demand for multimedia service using Ka-band satellite communication are growing rapi이y. So, in this paper, we have analyzed rain attenuation with typical model, and proposed prediction model of rain attenuation in high frequency(over 20[GHz]). Path loss model by rain attenuation is based upon rain rate of representative region(6 cities). Proposed prediction model of rain attenuation and parameter of satellite link can be available for the Ka-band satellite communication.

• 한국전산유체공학회지
• /
• 제17권4호
• /
• pp.9-15
• /
• 2012

Thermal model reduction algorithms and techniques are introduced to condense a huge satellite panel thermal model into the simplified model on the purpose of calculating the thermal responses of a satellite on orbit. Guyan condensation algorithm with the substitution matrix manipulation is developed and the mathematical procedure is depicted step by step. A block-form LU decomposition method is also invited to compare the developed algorithm. The constructed reduced thermal model induced from the detailed model based on a real satellite panel is satisfying the correlation criterion of ${\pm}2^{\circ}C$ for the validity accuracy. Guyan condensation algorithm is superior to the block-form LU decomposition method on computation time.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권2호
• /
• pp.113-119
• /
• 2023

Satellite navigation systems, with the exception of the GLObal NAvigation Satellite System (GLONASS), adopt ionosphere models and provide ionospheric coefficients to single-frequency users via navigation messages to correct ionospheric delay, the main source of positioning errors. A Global Navigation Satellite System (GNSS) mostly has its own ionospheric models: the Klobuchar model for Global Positioning System (GPS), the NeQuick-G model for Galileo, and the BeiDou Global Ionospheric delay correction Model (BDGIM) for BeiDou satellite navigation System (BDS)-3. On the other hand, a Regional Navigation Satellite System (RNSS) such as the Quasi-Zenith Satellite System (QZSS) and BDS-2 uses the Klobuchar Model rather than developing a new model. QZSS provides its own coefficients that are customized for its service area while BDS-2 slightly modifies the Klobuchar model to improve accuracy in the Asia-Pacific region. In addition, BDS broadcasts multiple ionospheric parameters depending on the satellites, unlike other systems. In this paper, we analyzed the different ionospheric models of GPS, QZSS, and BDS in Korea. The ionospheric models of QZSS and BDS-2, which are based in Asia, reduced error by at least 25.6% compared to GPS. However, QZSS was less accurate than GPS during geomagnetic storms or at low latitude. The accuracy of the models according to the BDS satellite orbit was also analyzed. The BDS-2 ionospheric model showed an error reduction of more than 5.9% when using GEO coefficients, while in BDS-3, the difference between satellites was within 0.01 m.

• 한국항공우주학회지
• /
• 제37권9호
• /
• pp.916-922
• /
• 2009

우주공간에서 임무를 수행하는 인공위성의 열설계는 열모델을 활용한 열해석 결과를 바탕으로 수행되므로, 열모델의 정확성은 매우 중요하며 이것은 보정과정을 통하여 향상된다. 열모델의 보정은 인공위성이 열진공 챔버에 장착된 형상을 모사하는 모델링에서 시작하여 실제형상과 열모델간의 일치성에 대한 검증, 거시적 변수에서부터 미시적 변수에 이르기까지 열모델 변수에 대한 조정 등을 거쳐 주어진 성공 조건을 만족할 때까지 열모델을 지속적으로 수정하는 과정으로 이루어진다. 본 연구에서는 열모델 보정의 성공 기준을 수립하고 인공위성 열-구조 모델 열진공 시험결과를 활용한 열모델 보정을 수행하여 보정 기준을 충족시켰다. 본 연구에서 보정이 완료된 열모델은 저궤도 인공위성 상세 열설계에 적용될 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.553-558
• /
• 2002

Physical sensor model in pushbroom satellite images can be made from sensor modeling by rotation parameters and attitude parameters on the satellite track. These parameters are determined by the information obtained from GPS, INS, or star tracker. Provided from satellite image, an auxiliary data error is connected directly with an error of rotation parameters and attitude parameters. This paper analyzed how obtaining satellite images influenced errors of rotation parameters and attitude parameters. furthermore, for detailed analysis, this paper generated simulated satellite image, which was changed variously by rotation parameters and attitude parameters of satellite sensor model. Simulated satellite image is generated by using high-resolution digital aerial image and DEM (Digital Elevation Model) data. Moreover, this paper determined correlation of rotation parameter and attitude parameters through error analysis of simulated satellite image that was generated by various rotation parameters and attitude parameters.

• 항공우주기술
• /
• 제7권2호
• /
• pp.187-195
• /
• 2008

고해상도의 인공위성 데이터로부터 지상좌표를 해석하는 센서모델링 기술은 위성영상자료의 활용 확대 및 신뢰성 확보에 가장 중요한 연구부분으로서 이에 대한 연구과 증가되고 있다. 본 연구는 이러한 요구조건을 기본을 하여, 고해상도 인공위성에서 기본적으로 탑재되어 있는 GPS, Star-tracker, Gyro 등의 센서로부터 측정된 위성의 위치, 속도, 자세 및 시간 정보를 이용하여 위성자료로부터 지상좌표를 해석하는 direct sensor model (DSM)과 위성의 궤도 정보를 얻을 수 없는 경우나 궤도에 대한 정보가 불확실하여 물리적 센서모델로는 지형보정을 수행할 수 없는 경우에 사용될 수 있는 rational function model (RFM)의 적용하여 지상좌표를 해석하는 방법에 대해 살펴보고자 한다.

• 한국위성정보통신학회논문지
• /
• 제6권2호
• /
• pp.46-50
• /
• 2011

인공위성에 대한 구조해석을 수행하기 위해서는 인공위성의 모든 기계적 특성이 반영된 유한요소모델을 필요로 한다. 인공위성의 개발특성상 여러 부품들은 서로 다른 회사에서 제작이 되며, 해당 유한요소모델의 제공이 불가능한 경우가 종종 발생하게 된다. 이러한 경우에 초요소 기법을 이용하면 쉽게 해결할 수 있다. 현재 개발중인 위성의 경우, 안테나 업체에서 안테나 기동시 발생하는 미소진동의 양을 계산하고자 인공위성 전체의 유한요소모델을 필요로 하였다. 이 때, 초요소 기법을 이용하여 축약된 모델을 제공할 수 있었다. 초요소기법은 Craig-Bampton 방법을 이용하여 유한요소모델을 동적축약하는 기법이며 본 논문에서는 인공위성 유한요소모델에 이를 적용하였다. 동적축약이 잘 이루어졌는지를 확인하기 위하여 전체 유한요소모델과, 축약모델의 모드해석 결과와 주파수 응답해석 결과를 비교하였으며, 두 결과가 매우 잘 맞는다는 것을 확인할 수 있었다. 이로부터 본 해석 방법의 유용성을 확인할 수 있었다.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.66-72
• /
• 2010

The north and south panel of a geostationary satellite are used for radiator panels to reject internal heat and utilize several heat pipe networks to control the temperatures of units and the main structures of satellite within proper ranges. The design of these panels is very important and essential at the conceptual design and preliminary satellite design stage, so several thousands of nodes or more are utilized in order to perform detailed thermal analysis of panel. Generating a large number of panel nodes takes time and is tedious work because the nodes can be easily changed and updated by locations of units and heat pipes. Also the detailed panel model can not be integrated into spacecraft thermal model due to its node size and limitation of commercial satellite thermal analysis program. Thus development of a program was required to generate a detailed panel model, to perform thermal analysis and to make a reduced panel model for the integration to the satellite thermal model. This paper describes the development and the verification of the panel thermal analysis program with its main modules and functions.