• Korean Journal of Remote Sensing
• /
• v.18 no.3
• /
• pp.147-153
• /
• 2002

The real-time reception and recording of down-link mission data from a satellite requires the highest reliability because the data lost in receiving process cannot be recovered. The data receiving and recording system has moved from a set of dedicated hardware and software components to commercial-off-the-shelf (COTS) components in order to reduce the system cost as well as to upgrade the system easily for handling other satellite data. The use of COTS hardware and middleware components prevents the system developer from correcting or modifying the internal operations of the COTS components, and hence, instant performance degradation of the COTS components which affects the reliable data acquisition must be covered by a software algorithm. This paper introduces the instant performance problem of a COTS data recording device which leads to the data loss in the real-time data reception and recording process. As a result, the requirement of the modification of the conventional data read/write technique is issued. In order to overcome the data loss problem due to the use of COTS components and the conventional software technique, a new algorithm called a software buffering technique is proposed. The experiments show that the application of the proposed technique results in reliable real-time reception and recording of high speed serial data.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.95-101
• /
• 2015

The backup site operation of the Image Data Acquisition and Control System (IDACS) for Communication Ocean Meteorological Satellite (COMS) is discussed in terms of the ground station configuration, image data processing, and the characteristics of backup activities for both the meteorological image data and the ocean image data. The well-performed backup operation of the COMS IDACS is also confirmed with the first three years normal operation results from April, 2011 to March, 2014. The operation results are analyzed through statistical approach to provide the achieved operational performance of the image data reception, preprocessing, and broadcast.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.209-216
• /
• 1999

KITSAT-3, the third satellite of KITSAT series which has been developed for the last four and half years with purely Korean design and implementation technology, was launched successfully at last. All subsystems were tested and validated during the initial operation of the satellite. During the initaial operation phase, the Earth imaging camera on board KITSAT-3 acquisited several tens of scenes all over the world and transmitted the image data to ground station. The quality of images and the reliability of data transmission-reception system were tested qualititively and quantititively, respectively. In this paper, we summarize the camera, data handling, on-board memory, and image data transmission system of KITSAT-3 as well as the image receiving and archiving system in ground station. The error rate of image data transmission and reception was tested during the initial operation phase. The average data transmission error rate satisfied the initial requirement of less than 1%. The error rate will be reduced through the continuous work of test and stabilization of the ground system hardware.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.557-560
• /
• 2005

The Korea Multi-Purpose SATellite-2 (KOMPSAT -2) will be launched into a circular sun synchronous orbit in Dec. 2005. For the mission operation of the KOMPSAT-2 satellite, KARl Ground Station (KGS) consists of the Mission Control Elements (MCE), Image Reception & Processing Elements (IRPE) and the overseas stations. For the oversea stations, the Kongsberg Satellite Services (KSAT) is the prime supplier of support service. KSAT has the capability to provide Tracking Telemetry and Commanding (TT&C) nominal, contingency and anomaly support for every single orbit for most polar orbiting satellites. Also KSAT provides nodal service through the network management functionality for all oversea ground stations. This paper describes the oversea stations and the support for Launch and nominal TT&C services for KOMPSAT-2 and the operation plan for KOMPSAT-2.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06b
• /
• pp.1-6
• /
• 1996

To promote academic researches on earth environment utilizing satellite data, research infrastructure such as satellite data reception processing, distribution and archival systems should be fully provided. The means to enhance the infrastructure were discussed by a working group and“Satellite Data Center via Network”has been proposed. This concept has three principles; (1) To realize necessary functions by organizing experts distributed all over Japan and connecting them by network, (2) To realize“Satellite Data Center via Network”for GMS and NOAA Satellites, which are widely used for research, and (3) Satellite data set oriented to specific research area should be generated by researchers having definite research purposes of sensor algorithms and hugh volume data processing. Utilization of the Science Information Network (SINET) has been discussed to realize this concept, and to accelerate this project an experiment“Network Utilization for Wide Area Use of Satellite Image Data”under“Cooperative Experiment on Multimedia Communication”has been introduced. And the roles of the Institute of Industrial Science, University of Tokyo to contribute this project has been described.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.76-82
• /
• 2006

The Mission Control System for KOMPSAT-2 was developed by ETRI and is being operated at Satellite Control Center at KARI to monitor and control KOMPSAT-2 (KOrea Multi-Purpose Satellite) which was launched in July 28th, 2006. MCE provides the functions such as telemetry reception and processing, telecommand generation and transmission, satellite tracking and ranging, orbit prediction and determination, attitude maneuver planning, satellite simulation, etc. KOMPSAT-2 is the successor of KOMPSAT-1 which is an earth-observation satellite. KOMPSAT-2 has higher resolution image taking ability due to MSC (Multi Spectral Camera) payload in the satellite and precise orbit and attitude determination by Mission Control System. It can produce one meter resolution image compared to six meter resolution image by KOMPSAT-1.

• Korean Journal of Remote Sensing
• /
• v.19 no.1
• /
• pp.37-42
• /
• 2003

Recently, KARI implemented the receiving and processing system for MODIS sensor data from NASA EOS satellites (TERRA and AQUA). This paper shows the development strategy considered, system requirement derived, system design, characteristic and test results of processing system. System operation concept and sample image are also provided. Implemented system was proven to be fully operational through lots of pass operations activities from RF signal reception to level-1 processing.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.157-175
• /
• 2000

A synthetic aperture radar (SAR) system is able to provide all-weather, day-and- night superior imaging capability of the earth surface, and thus is extremely useful in surveillance for both civil and military applications. In this paper, the X-band high resolution spaceborne SAR system design is demonstrated with the key design performance for a given mission and system requirements characterized by the small satellite system. The SAR multi-mode imaging technique is presented with a critical parameter assessment, and the standard mode results are analyzed in terms of the image quality performances. In line with the system requirement X-band SAR payload and ground reception/processing subsystems are designed and the major design results are presented with the key performance characteristics. This small satellite SAR system shows the wide range of imaging capability with high resolution, and proves to be an effective surveillance systems in the light weight, high performance and cost-effective points of view.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.31-33
• /
• 2003

Recently, KARI developed in-house meteorological sensor processing system named MESIS for GOES GVAR 5-CH Imager for better KOMPSAT EOC mission operation. MESIS consists of antenna system, receiver, serial telemetry card, processing and mapping software, and 2 NT PC systems. This paper shows system requirement, system design, characteristic and test results of processing system. System operation concept and sample image are also provided. Implemented system was proven to be fully operational through lots of operations covering from RF signal reception to web publishing.

• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.89-100
• /
• 2013

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service was launched onto Geostationary Earth Orbit on June 27, 2010 and it is currently under normal operation service after the In-Orbit Test (IOT) phase. The COMS is located on $128.2^{\circ}$ East of the geostationary orbit. In order to perform the three missions, the COMS has 3 separate payloads, the meteorological imager (MI), the Geostationary Ocean Color Imager (GOCI), and the Ka-band antenna. Each payload is dedicated to one of the three missions, respectively. The MI and GOCI perform the Earth observation mission of meteorological observation and ocean monitoring, respectively. During the IOT phase the functionalities and the performances of the COMS satellite and ground station have been checked through the Earth observation mission operation for the observation of the meteorological phenomenon over several areas of the Earth and the monitoring of marine environments around the Korean peninsula. The operation characteristics of meteorological mission and ocean mission are described and the mission planning for the COMS is discussed. The mission operation results during the COMS IOT are analyzed through statistical approach for the study of both the mission operation capability of COMS verified during the IOT and the satellite image reception capacity achieved during the IOT.