• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.773-788
• /
• 2017

This study was carried out to investigate the damage patterns, the occurrence and migration time of Pseudococcus comstocki and in order to improve the control effect of organic agricultural materials (OAMs). The experiment was carried out at Okcheon's organic vineyard ($2,500m^2$, sandy loam, manure) where planted 8~9 year old 'Muscat of Alexandria' vines. The comstock mealybug's migration to grape clusters occurred from the middle of July, and produced eggs in the grape clusters from the end of July, and the density of the comstock mealybug was highest at $0.6cm^2$ in late August. The number and fruit damage of comstock mealybug in eco-friendly vineyards were higher than in conventional culture vineyard. And the marketability of green variety grape was more damaged from comstock mealybug than the black variety grape. Toxicities of 8 OAMs were evaluated to comstock mealybug at the recommended concentration. As a results, Lightyellow sophora and Derris extracts exhibited strong insecticidal activity with 100% mortality. When the Lightyellow sophora extract was uniformly distributed on the vine from early-July to mid-July, fruit damage reduction rate was 96.2% and 84.6%, respectively. So commercial grapes could be harvested. Therefore, it was considered to be effective to reduce fruit damage by controlling in early - late July (the green stage) when the comstock mealybug migrated to grape clusters in the vine greenhouse. In the future, it will be necessary to study the effect of external exposure time and momentum on the control of OAMs.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.108-113
• /
• 1997

A field experiment was conducted to evaluate effect of phosphate coated slow release fertilizer on the directly seeded rice. Odae byeo was seeded by drill under dry condition. The soil was a sandy clay loam soil located in the Experimental Farm of the Kangweon National University, Chuncheon, Kangweon-Do. The yield of rice from the urea applicated directly seeded field was 84.9% of the yield from the transplanted field, and showed no difference between split application treatments. The yield from the phosphate coated slow release fertilizer was the highest showing 110.7% of the yield from the urea application. The yield from the polymer coated slow release fertilizer was 90.4%. The yield from the organic fertilizer 400kg/10a treatment was 81.8% and was 94.8% from the organic fertilizer 600kg/10a treatment. In 1996 experiment, the yield from the phosphate coated slow release fertilizer was higher than the yield from the transplanted field. The $NO_3-N$ and $NH_4-N$ concentrations in soil solution at the depth of 15cm revealed that nitrogen leaching was the highest from the urea N40-0-30-30 treatment, and the lowest from the phosphate coated slow release fertilizer. The phosphorus concentration showed similar pattern. Therefore, use of phosphate coated slow release fertilizer increased rice yield and decreased loss of nitrogen and phosphorus loss.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.63-69
• /
• 2015

This study was conducted to measure the effect of PE film mulching and irrigation methods on the growth, yield and antioxidant activity of potatoes tubers, in order to examine the possibility of cultivating potatoes in winter season in vinyl greenhouse on the reclaimed tidal land with weak ground inside the sea wall currently completed. The test was conducted on the sandy loam soil (Munpo series), and its salt concentration was 0.42% at the time of planting. The emergence speed per kind of PE film mulching was in the order of black > coloration > transparent > green color, with the black color showing the fastest speed. The temperature change during a day per kind of PE film mulching was in the order of transparent > coloration > green > black color. As for the salt concentration in the soil for each different way of water management, the salt concentration in the treatment of drip irrigation with 1 week interval was lower than that drip irrigation with 2 weeks interval. As for the growth of above-aerial part, plant length was higher, number of tiller and leaves were more and dry weight of above-aerial part was larger in the treatment of drip irrigaton with 1 week interval than drip irrigation with 2 weeks interval. As for the yield of potatoes depending on each way of water management, the yield in the treatment of drip irrigation with 1 week interval was more than drip irrigation with 2 weeks interval. The yield for each different kind of PE film mulching in the weekly drip-irrigation management section was in the order of transparent ${\geq}$ black ${\geq}$ coloration ${\geq}$ green color. In both of total phenol content and DPPH free radical activity experiments, the content and activity were higher with pear color vinyl treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.199-204
• /
• 1987

This study was conducted to verify the identity and the effects on soil improvements by the application of Barley stone which has been recently named as miraculous mineral on account of being propagandized as health stone because of several special effect of medicine, the supplement of micronutrients for agriculture, prevention against diseases and insects of plant, and the increase of nutrient holding capacity of soil. The results were summarized as follows; 1. Barley stone is considered as Diabase Porphyrite by the analysis of X-ray Diffraction, chemical composition and microspore's observation. This mineral stone called as Barley stone has been deducted because of being seen as if the feature was attatched with cooked barley and appearently scattered about feldspar's phenocryst on the dark-green stone base. 2. In chemical characteristics of barley stone, the pH 8.7 was higher but C.E.C. 9.0 me/100g was lower then those of other clay minerals such as Bentonite and Zeolite, and so barley stone material was not considered suitable for improvement of sandy loam soil. 3. Effects of Bentonite and Zeolite application on yield of paddy rice were 108-109% compare to non-treated plot, but Barley stone has not increased rice yield. Notwithstanding the increase of application of barely stone to 5 ton per 10a, the yield increase was not significantly showing only 102-103% and the effects of Peanut, hot pepper and chinese cabbage were not recognized either.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.6
• /
• pp.307-312
• /
• 2005

Since alpine upland in Pyungchang-gun has been typically applied every two or three years with saprolite, agricultural by-products are inputted to raise soil properties. Therefore, the effect of saprolite application on water quality in runoff and leachate should be monitored. To investigate water quality in runoff and leachate with various treatments of agricultural by-product, lysimeter with dimension of $0.85m{\times}1.75m{\times}0.30m$ was installed in Kangwon National University. Control, mixed compost with cow, chicken and sawdust by-product (CCSC), chicken manure by-product compost (CC), food waste by-product compost (FWC), and beer sewage sludge by-product compost (BSSC) at the rate of $10Mg\;ha^{-1}$ were mixed with soil in 25 cm depth, and water qualities in runoff and leachate were monitored from Jun. 4, 2004 to Oct. 18, 2004. EC ($0.8-2.2dS\;m^{-1}$) and concentrations of total N ($25-75mg\;L^{-1}$) and total P ($0.12-0.43mg\;L^{-1}$) were highest in both runoff and leachate of CC treatment. EC values in CC and FWC treatments continuously increased during lysimeter experiment, while total N and total P concentrations continuously decreased. Average total N concentrations in runoff taken from CCSC, FWC and BSSC treatments were 41, 34 and $37mg\;L^{-1}$, and in leachate were 35, 28 and $34mg\;L^{-1}$, respectively. Average total P concentrations were not different with different treatments. EC values in leachate were higher than those in runoff, and total N concentrations in runoff were higher than those in leachate.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.1
• /
• pp.4312-4322
• /
• 1977

In order to investigate the effect of the water content and the accelerated curing on the strength of the soil-cement mixtures, laboratory test of soil cement mixtures was performed at five levels of water content, four levels of accelerated curing temperatures, three levels of normal curing periods, and six levels of accelerated curing time. Also this study was carried out to investigate the effect of grain size distribution of 21 types of soils on the strength of soil-cement mixtures at four levels of cement content and three levels of curing time. The results are summarized as follows: 1. Optimum moisture content increased with increase of the cement content, but maximum dry density was changed ununiformly with cement content. Water content corresponding to the maximum strength was a little higher than the optimum moisture content along the increase of cement content. 2. In molding the specimens with the optimum moisture content, the maximum strength appeared at the wet side of the optimum moisture content. 3. According to increase of curing temperature as 30, 40, 50, and 60$^{\circ}C$, unconiiend compressive strength of soil-cement mixtures increased, the rate of increase at the early curing period was large, and approximately 120 hours was suifficient to harden soil-cement mixtures completely. 4. The strength of soil-cement mixtures at the curing temperature of 10$^{\circ}C$ decreased at the rate of 30 to 50 percent than at the curing temperature of 20$^{\circ}C$, and the strength of soil-cement mixtures at the curing temperature of 0$^{\circ}C$ increased a little with increase of curing time. 5. Although the strength of soil-cement mixtures seemed to be a little affected by the temperature difference between day time and night, it was recommended that reasonable working period was the duration from July to August of which average maximum temperature of Korea was approximately 30$^{\circ}C$. 6. Accelerated curing time corresponding to the normal curing time of 28-day was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mixtures for the cement of 9 percent and the curing temperature of 60was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mix- tures for the cement of 9 percent and the curing temperature of 60$^{\circ}C$ was 45 hours at the KY sample, 50 hours at the MH, 40 hours at the SS, and 34 hours at the JJ respectively. 7. Accelerated curing time was depended upon the grain size distribution of soil, it decreased with increase the percent passing of No. 200 sieve. 8. Relationship between the normal curing times and the accelerated curing times showed that there was a linear relationship between them, its slope decreased with increase of curing temperature. 9. The most reasonable soil of the soil-cement mixtures was the sandy loam which was a well graded soil. Assuming the base of road requiring 7-day strength of 21 kg/$\textrm{cm}^2$ being used, the soil-cement mixtures could be obtained with adding 6 percent of cement in such a sails S-7, S-8, S-9, S-10, S-11, S-12, S-13. 10. The regression equation between the 28-day and the 7-day strength was obtained as follow; q28=1.12q7,+6.5(r=0.96).

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.92-96
• /
• 2002

Present contamination levels of soils along the major roadsides of Seoul, Korea were investigated, and base-line data were accumulated for future use. Topsoil $(1{\sim}5$ cm) and subsoil $(20{\sim}50$ cm) from five districts (Gangdong-, Gwangjin-, Nowon-, Seodaemun- and Seongdong-gu) were sampled. The collected samples were airdried, passed through 2-mm sieves, and analyzed to determine the physicochemical properties including pH, EC, CEC, exchangeable cations (Ca, Mg, K, and Na), and heavy metal contents (Cd, Cu, Pb, and Zn). Soil textures of topsoils and subsoils were mainly loamy sand and sandy loam, respectively. The range of pH was $4.5{\sim}10$.0 with an average of 7.5 for both topsoil and subsoil, which is much higher than that of the forest soils in Seoul. The ranges of 0.1 N HCI extractable Cd, Cu, Pb, and Zn contents for both topsoils and subsoils were $0.0l{\sim}l.19$, N.D. (not $detected){\sim}228$.99, $N.D.{\sim}352$.54, and $2.97{\sim}332$.96 mg $kg^{-1}$, respectively. Most of the average heavy metal contents were lower than the concern level of the Soil Environment Conservation Act of Korea, but were much higher than those of the , forest soils in Seoul. Some sites were higher in heavy metal contents than the concern levels; in particular, the average Cu content in Seongdong-gu was much higher than the concern level, 50 mg $kg^{-1}$. Careful management of the soil to prevent the aggravation of the present contamination level and the dissemination of contamination is highly recommended.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.343-348
• /
• 2008

To investigate the effects of incorporation of green manures (GM) into a sandy loam soil on growth, yield, and nutrient uptake of tomato (Lycoperiscon esculentum Mill.) and nutrient balances (input minus offtake of nutrients), five tomato production systems were compared under the condition of plastic film house: 1) a no input system (no additional amendment or inputs, 0-To-0-To); 2) a conventional system (application of N-P-K chemical fertilizers, Cf-To-Cf-To); 3) a leguminous GM-containing system (hairy vetch-tomato-soybean-tomato, Hv-To-Sb-To); 4) a graminaceous GM-containing system (rye-tomato-sudan grass-tomato, Ry-To-Sd-To); and 5) system mixed with leguminous and graminaceous GMs (rye-tomatosoybean- tomato, Ry-To-Sb-To). Here, hairy vetch and rye were cultivated as winter cover crops during late $Dec{\sim}late$ Feb and soybean and sudan grass were cultivated as summer cover crops during late $Jun{\sim}mid$ Aug. All of them cut before tomato planting and then incorporated into soil. Biomass of GMs was greater in summer season than that of winter season. Nitrogen amount fixed by a leguminous plants was about $126\;kg\;ha^{-1}$ per a cropping season, corresponding to 60% N level needed for tomato production, which was comparable to 50 and $96\;kg\;ha^{-1}$ fixed by rye and sudan grass. As a result, tomato yield of Hv-To-Sb-To system (legume GM treatment) was similar to Cf-To-Cf-To (conventional), but that in Ry-To-Sd-To system (graminaceous GM treatment) was not attained to a half level of conventional treatment. Nutrient budgets for N, P and K on the conventional farm were balanced or somewhat positive exception for minus-balanced K. Ry-To-Sd-To system showed a positive N, P and K budgets due to the depressed growth of tomato which is caused by high C/N ratio and low N-fixing capacity of the GMs. Inversely, those of Hv-To-Sb-To system were negative in all of N, P and K budgets because of increased growth and yield of tomato with high nitrogen-supplying capacity as well as low C/N ratio of leguminous GM. In conclusion, although conventional cultivation has an advantage in relation to N, P and K nutrient budgets rather than GM-incorporated systems, a leguminous GMs could be recommended as nitrogen reservoir and soil amendment because the yield of tomato between use of leguminous GM and conventional cultivation was not only significantly difference, but also GMs commonly reduce nutrient loss and improve microbial communities.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.306-312
• /
• 2007

To investigate the effect of N fertigation on the growth, yield, and water and nitrogen use efficiencies during tomato cultivation, seedlings were transplanted in a sandy loam soil under plastic film house condition. 0, 88, 132, 176, $220\;kg\;ha^{-1}$ N rates, which correspond to 0 (NF0), 40 (NF40), 60 (NF60), 80 (NF80), 100% (NF100) N level of soil test-based N fertilization, were injected weekly through drip irrigation system for 15 weeks in N fertigation system, and the control (conventional N treatment) was installed for comparison. Herein, nitrogen was applied by top-dressing with 60% as a basal and 40% as additional fertilizer. There was little different in stem diameter growth among N fertigation treatments, but plant height and dry matter increased with increasing N fertigation rates as well as in N conventional treatment. Tomato yield was increased with increasing the number of marketable fruits in N fertigation treatments, and the fruit yield was maximized in NF 80 treatment ($176\;kg\;ha^{-1}$ N supply or $96.6\;mg\;L^{-1}$ N injection). Dry matter productivity and nitrogen uptake amount were significantly increased with increasing N fertigation rates. The ratio of fruits to the dry weight of whole plant was decreased with increasing N fertigation rates, but this ratio was $2.6{\sim}5.3%$ higher in N fertigation treatments than in the control. In addition, the ratios of nitrogen distributed toward fruits in N fertigation treatments were $3.7{\sim}21.7%$ higher than that of control. The apparent N recovery percentages showed significantly higher values as $71.8{\sim}102.3%$ in N fertigation treatments, compared to 45% in N conventional treatment. Water use efficiency was significantly increased by fertigation system with the maximum $361\;kg/ha\;cm^{-1}$ in NF 80, which is comparable to $324\;kg/ha\;cm^{-1}$ of the conventional treatment. Conclusively, N fertigation system was effective on increasing tomato productivity and nutrient efficiency as well as 20% reduction of N fertilization level.