• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.661-666
• /
• 2000

Near-wake flow field of a circular cylinder is studied by means of a cinematic PIV system with high sampling rate and large internal memory block. Experiments are conducted in a closed-cycle water tunnel system and a cross-correlation algorithm in conjunction with FFT (Fast Fourier Transform) analysis and an offset correlation technique is used for vector processing. With the help of very high sampling frequency compared to the shedding frequency, it is possible to obtain phase-averaged information of the three-dimensional wake, even though the shedding is not forced but natural. Phase-locked vortical structures observed simultaneously from the spanwise and cross-stream planes are displayed in the wake-transition regime where fine-scale secondary vortices have a spanwise wavelength or around one diameter. Spatial relations and temporal evolutions of the primary Karman vortex and the secondary vortex are also discussed schematically.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.274-285
• /
• 1992

Among various Power converters, a variable voltage variable frequency (VVVF) three-phase PWM inverter is regarded as most promising power converter due to its capabilities, which permits the control of voltage, frequency and harmonic contents in a single power stage employing only on DC source. As a modulating technique of the PWM inverter, the regular sampling technique has rendered possible the on-line computation and generation of PWM control waveforms with a reasonably high switching frequencies. In this paper, microprocessor based three-phase regular samping PWM inverter with real-time control algorithm and control circuits for driving three phase AC motor has been developed. Harmocic components of PWM waveform were analized theoretically in terms of Bessel function series and then calculated by digital computer and observed with spectrum analyzer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1418-1423
• /
• 2016

The purpose of this research is to investigate the effect of sampling frequency on the photoplethysmography (PPG) and to evaluate the performance of interpolation methods for under-sampled PPG. We generated down-sampled PPG using 10 kHz-sampled PPG then evaluated waveshape changes with correlation coefficient. Correlation coefficient was significantly decreased at 50 Hz or below sampling frequency. We interpolated the down-sampled PPG using four interpolation method-linear, nearest, cubic spline and piecewise cubic Hermitt interpolation polynomial - then evaluated interpolation performance. As a result, it was shown that PPG waveform that was sampled over 20 Hz could be reconstructed by interpolation. Among interpolation methods, cubic spline interpolation showed the highest performance. However, every interpolation method has no or less effect on 5 Hz sampled PPG.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.149-154
• /
• 2017

Performance of the mobile devices, such as Smartphones, is sensible by the early-stage of the execution of the applications. To addressing this issue, the dynamic frequency scaling by the ondemand governor has an inherent weakness by the sampling period that may induces some delay in the execution time of the applications. In this paper, we propose an adaptive sampling method that varying the sampling period of the ondemand governor in accordance with the execution of the applications. By the experiment result, the proposed method outperforms 3.34% in early-stage of the execution time that impacts the sensible performance, and exhibits negligible differences in terms of the energy consumption.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.1
• /
• pp.79-83
• /
• 1991

Diurnal variation in faecal chromic oxide levels was estimated from 4 hourly faecal sampling of 56 wethers allotted to one of six different feeding patterns. Sampling occurred on days 6 and 7 (Period 1) after a controlled release device was administered, and was repeated on days 14 and 15 (Period 2) following re-randomisation of the wethers to the feeding patterns. Increasing the frequency of feeding tended to be associated with higher faecal chromic oxide levels (p < 0.05), particularly in wethers fed thrice daily at 8 hour intervals. There was no interaction between feeding pattern and period, sampling day or time within-day. There were significant period x time within-day (p < 0.05) and day x time within-day (p < 0.001) interactions, indicating that variation in faecal chromic oxide between sample times was not consistent. This implies that sampling at any time of day is unlikely to result in a biased estimate of pasture intake, providing sufficient samples are collected. Significant period (p < 0.001) and period x day (p < 0.01) effects were associated with slow faecal chromic oxide equilibration in period 1. Equilibration did not occur until after day 7, indicating a need for caution when commencing sampling.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.194-200
• /
• 2006

A 26.4 GHz phase locked oscillator(PLO) for communication satellite transponder is developed. The PLO consists of fundamental frequency generation module(FFGM) and frequency multiplication part(FMP). The signal of 26.4 GHz is generated through frequency tripling process of 8.8 GHz fundamental frequency. Phase locking technique using sampling phase detector(SPD) is adopted to design the FFGM. The MMIC tripler and amplifier are also designed for the reduction of the size and mass of FMP. The phase noise characteristics are exhibited as -96 dBc/Hz at 10 tHz offset frequency and -105 dBc/Hz at 100 kHz offset frequency, respectively, with the output power over 11 dBm. All performance parameters are complied with the design requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.794-806
• /
• 2004

This paper deals with correction of frequency offset and analysis of quantization angle noise in the IEEE 802.1la OFDM system. The rotation phase per symbol due to the carrier frequency offset is estimated from auto-correlation of the short Preambles, which are over-sampled for the reduction of noise in OFDM signals. The pilot signals are introduced to estimate the rotation phase per OFDM symbol due to estimation error of the carrier frequency offset and the sampling frequency onset. During the estimation and correction of the frequency onsets, a CORDIC processor and a look-up table are used for the conversion between a rotation phase and its complex number. Being calculated by a limited number of bits in the CORDIC processor and the look-up table, the rotation phase and its complex number have quantization angle errors. The quantization errors are analyzed as SNR (signal to noise ratio) due to the quantization bit numbers. The minimum bit number is suggested to meet the specification of IEEE 802.1la properly. Finally, the quantization errors are evaluated through simulations on number of quantization bits and SNR of received signals.

• School Mathematics
• /
• v.12 no.3
• /
• pp.273-299
• /
• 2010

The purpose of the study is designing and implementing 'Sampling Distributions Simulation' to help students to understand concepts of sampling distributions. This computer simulation is developed to help students understand sampling distributions more easily. 'Sampling Distributions Simulation' consists of 4 sessions. 'The first session - Confidence level and confidence intervals - includes checking if the intended confidence level is actually achieved by the real relative frequency for the obtained sample confidence intervals containing population mean. This will give the students clearer idea about confidence level and confidence intervals in addition to the role of sampling distribution of the sample means among those. 'The second session - Sampling Distributions - helps understand sampling distribution of the sample means, through the simulation method to make comparison between the histogram of sampling distributions and that of the population. The third session - The Central Limit Theorem - includes calculating the means of the samples taken from a population which follows a uniform distribution or follows a Bernoulli distribution and then making the histograms of those means. This will provides comprehension of the central limit theorem, which mentions about the sampling distribution of the sample means when the sample size is very large. The forth session - the normal approximation to the binomial distribution - helps understand the normal approximation to the binomial distribution as an alternative version of central limit theorem. With the practical usage of the shareware 'Sampling Distributions Simulation', we expect students to have a new vision on the sampling distribution and to get more emphasis on it. With the sound understandings on the sampling distributions, more accurate and profound statistical inferences are expected. And the role of the sampling distribution in the inferences should be more deeply appreciated.

• Proceedings of the Zoological Society Korea Conference
• /
• 1994.10a
• /
• pp.137.2-137
• /
• 1994

No Abstract, See Full Text

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.682-688
• /
• 1994

LSM(Least-Squares Method) has inherent limitation that precise system identification over wide frequency band is difficult especially at low frequency hand. In this paper we propose to use decimation, a spectrum analysis method widely used in signal processing. The merits of decimation are the flexibility of selection of the frequency hand concerned and the function of LPF(Low Pass Filter). In this paper, frequency-domain is divided into separate frequency bands which will be combined into full frequency-domain by using MDM(Multiple Decimation Method). In this way, free selection of sampling frequency for each hand is possible and the low frequency oscillation modes of LSM are avoided.