• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.111-119
• /
• 2014

This study was carried out to investigate the quality characteristics and antioxidant activity of a functional drink prepared by mixed fermentation of oak mushroom extract and whey. As the ratio of oak mushroom extract increased, the pH value of the whey fermentative solution decreased proportionally, and the titratable acidity increased significantly. The number of lactic acid bacteria after 24 hours of culture was at a level of $10^{11}CFU/mL$ in all whey fermentative solutions containing oak mushroom extracts. DPPH and ABTS radical scavenging activities after 24 hours of culture were higher in a fermentative solution containing oak mushroom extract than in the control. After 24 hours of culture, the nitric oxide production in whey fermentation solution by LPS-induced RAW 264.7 cells was lower compared to that in whey fermentation solution with oak mushroom. Sensory evaluation revealed that, color, flavor, taste, and overall acceptability of the whey fermentation solution sample, which contained 1.0% oak mushroom extract, were much better than those of the other groups. Sensory evaluation of a whey drink containing oak mushroom flavor indicated that the whey drink containing 0.001% oak mushroom flavor was better than the other samples.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1002-1008
• /
• 2000

The purpose of this study was to provide the fundamental information for establishing the database needed to estimate total intakes of trans fatty acids in Korea. The amounts of trans fatty acids contained in 164 samples including 25 samples of margarines, 21 samples of shortenings, 19 samples of vegetable salad and cooking oils, 53 samples of confectionery products, 18 samples of bakery products, 19 samples of dairy products, and 9 samples of animal fats and meats were analyzed by capillary gas liquid chromatography. The average amounts of trans fatty acids in those foods were calculated and expressed as gram per one serving. Then, the average daily intakes of trans fatty acids per capita were estimated using the analyzed amounts of trans fatty acids and the amount of yearly production for those foods. The amounts of trans fatty acids per 100 g of lipids were $2.11{\sim}33.83%$ (14.66% on average) in margarines, $1.47{\sim}44.48%$ (14.21% on average) in shortenings, $0.18{\sim}3.82$ (1.54% on average) in vegetable salad and cooking oils, $0{\sim}45.81%$ (10.92% on average) in confectionery products, $0{\sim}18.32%$ (7.87% on average) in bakery products, $0.90{\sim}4.54%$ (2.27% on average) in dairy products, and $0.61{\sim}6.07%$ (2.24% on average) in animal fats and meats. Major isomers of trans fatty acid in the sample foods were $C_{18:1}$ and $C_{18:2}$. As a result, the korean average daily intake of trans fatty acids in korea was estimated to be 2.3 g per capita. The amounts of trans fatty acids consumed from each selected food were as follows: 0.35 g from margarines, 0.57 g from shortenings, 0.11 g from vegetable salad and cooking oils, 0.65 g from confectionery products, 0.07 g from bakery products, 0.14 g from dairy products and 0.21 g from animal fats and meats.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.125-133
• /
• 2011

This study was conducted on greenhouses whose side heights had been raised after the columns of 1-2W basic type greenhouses had been cut and welding with the same-sized pipes. When the wind load or snow load affects restructured pipe greenhouse like this, those parts will be structurally unsafe. To examine this, the bending strength of welded columns were measured through four stages and compared with the pipes in their original condition. Results are as follows. In the case of a bending test on welded joints about steel pipes used for greenhouses, satisfactory results couldn't be drawn because sections of both ends and the loading parts couldn't endure loads and sank regardless of loading methods. Partial problems could be solved by inserting inside pipe(steel bar) at the sections and the loading parts, but it was necessary to devise more satisfactory bending test methods. The strength of welded joints wasn't much different compared with original conditions and demonstrated only slight differences according to the sample production conditions. However, significant incompleteness in the welding process was expected to cause a decisive loss in strength. On the assumption that there were no problems in the welding process or with regard to the inclination of sub materials for columns after connection, it was deemed reasonable to assume that the strength of welded pipes was about 84~90% of the strength of the pipes in their original condition. Considering mid- and long-term strength decline following the onset of rust at joints or welding sections, structural changes in the main sub materials that are used for greenhouses at farmhouses have to be avoided to ensure structural safety, unless these changes are inevitable.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.477-483
• /
• 2020

We constructed a stand yield table for Chamaecyparis obtusa based on data from an actual forest. The previous stand yield table had a number of disadvantages because it was based on actual forest information. In the present study we used data from more than 200 sampling plots in a stand of Chamaecyparis obtusa. The analysis included theestimation, recovery and prediction of the distribution of values for diameter at breast height (DBH), and the result is a valuable process for the preparation ofstand yield tables. The DBH distribution model uses a Weibull function, and the site index (base age: 30 years), the standard for assessing forest productivity, was derived using the Chapman-Richards formula. Several estimation formulas for the preparation of the stand yield table were considered for the fitness index, and the optimal formula was chosen. The analysis shows that the site index is in the range of 10 to 18 in the Chamaecyparis obtusa stand. The estimated stand volume of each sample plot was found to have an accuracy of 62%. According to the residuals analysis, the stands showed even distribution around zero, which indicates that the results are useful in the field. Comparing the table constructed in this study to the existing stand yield table, we found that our table yielded comparatively higher values for growth. This is probably because the existing analysis data used a small amount of research data that did not properly reflect. We hope that the stand yield table of Chamaecyparis obtusa, a representative species of southern regions, will be widely used for forest management. As these forests stabilize and growth progresses, we plan to construct an additional yield table applicable to the production of developed stands.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.2
• /
• pp.177-188
• /
• 2021

On December 2015, Financial Supervisory Service(FSS) announced the four key thematic audit review areas, one of them is an appropriation of unbilled revenue. Accounting of unbilled revenue is intertwined with a percentage of completion, that is concerned about discretionary decision by manager. Therefore, if manager motivated by income-increasing manipulation is exaggerating percentage of completion, unbilled revenue is excessively recognized. This problem is caused the serious accounting issues(e.g., shock at a loss for 2013 fiscal year by some construction firms, malpractice of accounting in order-made production industry). Distrust of accounting was grown because the shipbuilding and construction industries successively went poor management and bad accounting of them is revealed. Those accounting issues were the trigger for problem recognition of unbilled revenue, they were background for the designation of appropriation unbilled revenue as thematic audit review areas by FSS. Therefore, this study verified effectiveness of thematic audit review by empirically analyzing whether designation of thematic audit review makes the firm increases conservative behavior. Conservative accounting is estimated by using Basu(1997) model. We analyzed the effect of the thematic audit review on conservative accounting of unbilled revenue by comparing with reflecting unbilled revenue or not. The sample for test consists of firm-years the manufacturing and construction industries from 2012 to 2017. The test results of this study suggested that the conservative accounting of unbilled revenue after designation of the thematic audit review was significantly increased. We also tested again by classifying whether or not it is construction industry. We found that construction industry is more conservative than the other industry only for the designated year of the thematic audit review, otherwise there was not any evidence for significantly increasing conservatism. This study contributes to the literature by empirically analysing relationship of the unbilled revenue to the thematic audit review from the perspective of the conservatism and verifying effectiveness of the thematic audit review.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.3
• /
• pp.220-237
• /
• 2021

Since the functional importance of marine phytoplankton was firstly advocated from early 1880s massive data on the species composition and abundance were produced by classical microscopic observation and the advanced auto-imaging technologies. Recently, pigment composition resulted from direct chemical analysis of phytoplankton samples or indirect remote sensing could be used for the group-specific quantification, which leads us to more diversified data production methods and for more improved spatiotemporal accessibilities to the target data-gathering points. In quite a few cases of many long-term marine ecosystem monitoring programs the phytoplankton species composition and abundance was included as a basic monitoring item. The phytoplankton data could be utilized as a crucial evidence for the long-term change in phytoplankton community structure and ecological functioning at the monitoring stations. Usability of the phytoplankton data sometimes is restricted by the differences in data producers throughout the whole monitoring period. Methods for sample treatments, analyses, and species identification of the phytoplankton species could be inconsistent among the different data producers and the monitoring years. In-depth study to determine the precise quantitative values of the phytoplankton species composition and abundance might be begun by Victor Hensen in late 1880s. International discussion on the quality assurance of the marine phytoplankton data began in 1969 by the SCOR Working Group 33 of ICSU. Final report of the Working group in 1974 (UNESCO Technical Papers in Marine Science 18) was later revised and published as the UNESCO Monographs on oceanographic methodology 6. The BEQUALM project, the former body of IPI (International Phytoplankton Intercomparison) for marine phytoplankton data QA/QC under ISO standard, was initiated in late 1990. The IPI is promoting international collaboration for all the participating countries to apply the QA/QC standard established from the 20 years long experience and practices. In Korea, however, such a QA/QC standard for marine phytoplankton species composition and abundance data is not well established by law, whereas that for marine chemical data from measurements and analysis has been already set up and managed. The first priority might be to establish a QA/QC standard system for species composition and abundance data of marine phytoplankton, then to be extended to other functional groups at the higher consumer level of marine food webs.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.401-408
• /
• 2022

As research on a controlled environment system based on crop growth environment sensing for sustainable production of horticultural crops and its industrial use has been important, research on how to properly utilize soil moisture sensors for outdoor cultivation is being actively conducted. This experiment was conducted to suggest the proper method of utilizing the TEROS 12, an FDR (frequency domain reflectometry) sensor, which is frequently used in industry and research fields, for each orchard soil in three regions in Korea. We collected soils from each orchard where fruit trees were grown, investigated the soil characteristics and soil water retention curve, and compared TEROS 12 sensor calibration equations to correlate the sensor output to the corresponding soil volumetric water content through linear and cubic regressions for each soil sample. The estimated value from the calibration equation provided by the manufacturer was also compared. The soil collected from all three orchards showed different soil characteristics and volumetric water content values by each soil water retention level across the soil samples. In addition, the cubic calibration equation for TEROS 12 sensor showed the highest coefficient of determination higher than 0.95, and the lowest RMSE for all soil samples. When estimating volumetric water contents from TEROS 12 sensor output using the calibration equation provided by the manufacturer, their calculated volumetric water contents were lower than the actual volumetric water contents, with the difference up to 0.09-0.17 m³·m^-3 depending on the soil samples, indicating an appropriate calibration for each soil should be preceded before FDR sensor utilization. Also, there was a difference in the range of soil volumetric water content corresponding to the soil water retention levels across the soil samples, suggesting that the soil water retention information should be required to properly interpret the volumetric water content value of the soil. Moreover, soil with a high content of sand had a relatively narrow range of volumetric water contents for irrigation, thus reducing the accuracy of an FDR sensor measurement. In conclusion, analyzing soil water retention characteristics of the target soil and the soil-specific calibration would be necessary to properly quantify the soil water status and determine their adequate irrigation point using an FDR sensor.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.313-321
• /
• 2023

Platycodon grandiflorus (P. grandiflorus) flower is a perennial plant belonging to the family Campanulaceae and has many excellent pharmacological effects, so it has been used as a medicinal ingredient since ancient times. In addition, anthocyanin is a purple or blue natural pigment contained in plant flowers and fruits, and is known as a powerful antioxidant. The purpose of this study was to confirm the dermatological functionality of P. grandiflorus flower extract and the value of the bluish anthocyanin contained in flowers as a cosmetic material as a natural pigment. Firstly, 50% ethanol and 80% ethanol were added to the P. grandiflorus flower and extracted under reflux for 4 h at 25, 60, and 80 ℃, and the pH of each treatment group was similar. Based on the anthocyanin content and chromaticity (E^*ab), 50% ethanol 60 ℃ extraction conditions showing the color development most similar to the natural color of the P. grandifloras flower were selected, and a sample was prepared by concentrating and lyophilizing. The analysis results showed that the total phenol, total flavonoid, and total anthocyanin contents were in the ranges of 23 ㎍/mL, 16 ㎍/mL, and 0.17 ㎍/mL, respectively. The P. grandiflorus flower extract suppressed the production of nitric oxide (NO) and interleukin-6 (IL-6) in lipopolysaccharide (LPS) induced RAW264.7 cells. Furthermore, the P. grandiflorus flower extract showed wound healing effects through the promotion of skin cell migration in TNF-α stimulated human keratinocytes. The stability of anthocyanin and extract color was studied during a storage period of 50 days at various temperatures (4 ℃, 25 ℃, and 45 ℃). Color values (L, a, and b) of the P. grandiflorus flower extract changed over 50 days, whereas the bluish-purple color of the extract was stabilized using 5% maltodextrin. These results suggest that P. grandiflorus flower extract may be useful as a natural cosmetic pigment.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.93-114
• /
• 1978

The purpose of the study was to find out possible ways for increasing farm income through the sheep and Korean native goats farming, and to investigate meat productivity, wool productivity; woolskin utility, physiological characteristics and correlation between economical college animal farm of the Chungnam National University and sample farms in the suburbs of Dae jeon City were selected for feeding 20 heads of Corriedale wethers and another 20 heads Korean native kids as research materials for the periods of 5th May-26th November, 1977. The data such as growth rate, carcass, viscera weight, blood picture and plamsa components, hebage intake and economic traits were obtained and analysed. The result of the study are summarized as follows: 1. Meat production and quality 1) After 196days of feeding, the body weight of sheep and Korean native goats was increased by two times of those at the beginning of the trial, i.e. 20kg and 8kg respectively. 2) There was no significance of growth rates of sheep in housing and grazing. 3) The growth rate of Korean native goats were excellent at the mountainous areas of Gong ju-Gun where infectious diseases were not found 4) Accroding to the body measurements of 18-month-old sheep, percentages of hip height, body length, rump length, chest depth, chest width, hip width, chest girth and forearm circumference to the withers height were 103,%, 104%, 33%, 44%, 31%, 23%, 135% and 15% respectively, and those of hip height, body length, chest depth and chest girth of 8-month-old native goats to the withers height were 106%, 109%, 46% and 122,% respecitively. As a result, it was found that the percentage of hip height, body length and chest depth of Korean native goats were higher than those of sheep while that of the chest girth of goats was lower. 5) In the carcass data, 47, $52{\pm}2.27%$ of carcass percentage, $34.61{\pm}1.62%$ of lean meat, $26.07{\pm}2.51%$ of viscera, $9.75{\pm}1.4%$ of bone, and $20.95%{\pm}2.14%$ of woolskin for sheep, and $45.58{\pm}5.63%$ of carcass percentage, $27.62{\p}3.81%$ of meat, $34.86{\pm}4.16%$ of viscera, $11.66{\pm}1.83%$ of bone, $3.63{\pm}1.61%$ of skull and $9.26{\pm}2.41%$ of woolskin for native goats were obtained. 6) The contents of moisture, crude protein, crude fat and crude ash in native goat meat were much similar in both plots of housing and grazing. It was, however, known that the contents of moisture and protein were higher in grazinrg than in housing, while fat content was lower in grazing plots. 7) The weights of visceral organs shown similar tendency for both of sheep and native goats. For the weights of liver, heart, kidney and spleen, significance was not reconized among the treatments. Those of rumen, reticulum, small and large intestine were heavier in grazing than in housing, while the amount of visceral fat was heavier in housing. 2. Wool productivity and woolskin 1) The wool production of sheep for 7 months was $3.88{\pm}1.02kg$, and wool percentage, staple length, straighten length, wool growth per day and number of crimps were $9.27{\pm}1.48%$, 8. $47{\pm}1.00cm$, $10.63{\pm}0.99cm$, $0.40{\pm}0.04cm$ and $2.78{\pm}0.40$ respecitively. 2) The tensile strength and tear strength of woolskin treated by alum tanning were highest on the skin obtained from rump, i.e. $1,351kg/mm^2$ and $2,252kg/mm^2$ respectively, and they are in order of loin and shoulder. 3. Utilization and improvement of pasture. 1) The difference of herbage intake of native goats was not recognized between grazing and tethering, but the intake in the afternoon was s lightly higher than that in the morning. However the hervage intake of sheep was superior in grazing and in the afternoon. 2) The cultivation effect was lower in the native goat plots due to their cultivation abilities, in other words, the establishment rates of pasture by hoof cultivation were 60.25% in the goat plots and 77.35% in the sheep plots. 4. Correlation among economical traits. 1) The correlation between live weight of sheep and daily gain was higher. On the other hand, the correlation between other traits was not significant except that live weight, daily gain and lean meat percentage to the length of thoracic vertebrae. The live weight of native goats and meat production were highly correlated, and high correlation was also found between weights of carcass and meat. However, negative correlation was shown between viscera weight and live weight as well as daily gain. 2) The correlatoin between fleece weight of sheep and other traits such as live weight, daily gain and fleece percentage is very high at the 1% siginficant level, and this means that rapid-growth individuals can produce much fleece. 3) The correlation between the factors such as weights of live body, lean meat and viscera of sheep and body measurements, i. e. chest girth and body length was highest, and weights, of carcass and lean meat was highly correlated to chest width and depth. It will be therefore reasonable that the meat productivity estimates will have to be made on the basis of chest girth and body length. The meat production traits of native goats were highly correlated to the most of body measurement data, and the correlation coefficient between chest girth and weights of live body, carcass, lean meat and bone percentage was very high, i. e. 0.992-0.974 in particular. The correlations of meat production traits to chest depth, forearm circumference, body length were 0.759-0.911, 0.759-0.909 and 0.708-0.872 respectively. Therefore, the meat production of native goats will have to be estimated on the basis of chest data. 5. Blood picture and plasma components. 1) The number of erythrocyte and MCHC of native goats were $12.93{\times}10^6/mm^3$ and 36.14%, and those of sheep were $10.68{\times}10^6/mm^3$ and 36.26 respectively. The values of native goats were significantly higher than those of sheep. 2) The hemoglobin concentration, PVC, MCV and MCR of native goats were 10.92 g/100ml, $23.40{\mu}^3$ and 10.94 pg, and those of sheep were 11.73 g/100ml, 36.25 ml/100ml, $33.97{\mu}^3$ and 30.2 ml/100ml 8.43 pg respectively. The values of native goats were significantly lower those of sheep. 3) The number of leukocytes of native goats was significantly higher than that of sheep, that is, $11.64{\times}10^3/mm^3$ in native goats and $9.32{\times}10^3/mm^3$ in sheep. 4) In differential count of leukocyte, neutrophil was significantly high in native goats while lympocyte in sheep. On the other hand, the basophil, eosinophil and monocyte were not significant between native goats and sheep. 5) The amounts of total protein and glucose in the plasma of native goats were 6.2g/100ml and 53.6mg/100ml, and those of sheep were 5.6g/100ml and 45.7mg/100ml, which means that the values of native goats were significantly higher that those of sheep. The amount of total-lipid of native goats(127.6mg/100ml) was significantly than that of sheep(149.6mg/100ml). 6) The amount of non-protein nitrogen, cholesterol, Ca, P, K, Na and Cl were not different between native goats and sheep. 6. Economic analysis. 1) The gross revenue of a farm which fed native goats and sheep was 4,000won per head and the optimum size for feeding them in a farm as a subsidiary work is 5-10 heads. 2) Since there was no difference between housing and grazing, they can be fed in group for farm's subsidiary work. 3) They can be also fed by youths and house wives in the suburbs of cities, because labour requirement is estimated as only two hours per days for feeding 5 heads of native goats and sheep.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.413-426
• /
• 2010

This study was conducted to investigate the effects on fermentation characteristics of rumen microorganism by different types and levels of lignosulfonate treated soybean meal (LSBM) in in vitro test and rumen simulation continuous culture (RSCC) system in dairy cows. The experiment I was control and 12 treatments (each with 3 replications) in vitro test to demonstrate composition of different types of treatments with lignosulfonate (Desulfonate, Na, Ca and solution) and levels (2, 4 and 8%) of soybean meal in the dairy cow diet. LSBM source treatments in the dairy cow diet showed pH value, $NH_3$-N concentration and total VFA concentration lower than control at all levels and incubation times (p<0.05). Dry matter digestibility of LSBM source treatments showed lower than control (p<0.05). Gas production and rumen microbial synthesis was decreased by rumen microbial fermentation for incubation times. Undegradable protein (UDP) concentration of all LSBM treatments was decreased for incubation times, and significantly higher than control (p<0.05). In the experiment II compared diets of the control, LSBM Na 2%, LSBM Sol 2%, which are high performance to undegradable protein (UDP) concentration experiment I in vitro test, and heated treatment lignosulfonate (LSBM Heat) 2% in the dairy cow diet from four station RSCC system ($4{\times}4$ Latin square). A rumen microbial fermentation characteristic was stability during 12~15 days of experimental period in all treatments. The pH value of LSBM treatments was higher than control treatment (p<0.05). The $NH_3$-N concentration, VFA concentration and rumen microbial synthesis of LSBM treatments were lower than control (p<0.05). The undegradable protein (UDP) showed LSBM Na 2% (45.28%), LSBM Sol 2% (43.52%) and LSBM Heat 2% (43.49%) higher than control (41.55%), respectively (p<0.05). Those experiments were designed to improve by-pass protein of diet and milk protein in the dairy cows. We will conduct those experiments the in vivo test by LSBM treatments in dairy cows diet.