• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.71-76
• /
• 2002

In this study low cycle fatigue (LCF) behavior of 12Cr steel at high temperature are described. Secondly, comparisons between predicted lives and experimental lives are made for the several sample life prediction models. Two minute hold period in either tension or compression reduce the number of cycles to failure by about a factor of two. Twenty minute hold periods in compression lead to shorter lives than 2 minute hold periods in compression. Experiments showed that life predictions from classical phenomenological models have limitations. More LCF experiments should be pursued to gain understanding of the physical damage mechanisms and to allow the development of physically-based models which can enhance the accuracy of the predictions of components. From a design point-of-view, life prediction has been judged acceptable for these particular loading conditions but extrapolations to thermo-mechanical fatigue loading, for example, require more sophisticated models including physical damage mechanisms.

• Laser Solutions
• /
• v.10 no.1
• /
• pp.11-17
• /
• 2007

We presented the proper laser processing conditions for the capillary line marking, which could be applied for the fabrication of injection needles. With changing the parameters such as lamp current, duty cycle and beam amplification factor of beam expander, we evaluated the processing performance considering amount of dross, processing efficiency and processed linewidth in the sample. We could carry out the proper line marking at the condition of 70% lamp current, duty cycle of 7-10% and 6-times amplification of beam diameter. To perform efficient line processing, the utilization of duty cycle of 12% at 80% lamp current was also preferred.

• Journal of Family Resource Management and Policy Review
• /
• v.7 no.1
• /
• pp.135-152
• /
• 2003

This study examined which factors influence educational expenditure by family life cycle. Data for this study were from the 2001 Household Income and Expenditure Survey and consisted of a sample of 2,681 households. The results showed that the households having high school students had the highest educational expenditure and the households having middle school students had the highest ratio of educational expenditure to consumption expenditure. The education of household head, family type, the number of children, the age of the youngest child, and family income had significant effect on educational expenditure in all the stages of family life cycle. The results of this study will be useful for financial management of households and give suggestions for the government policy on education.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.183-191
• /
• 2023

This study was conducted experimentally to investigate the surface temperature of the heat sink, the air temperature in the flow channel and the sample temperature by changing the channel number of channel type heat sink and the air flow rate when heating and cooling the bio sample. The target temperature of the sample was 15℃ or less as the minimum value and 82℃ or more as the maximum value. In this study, the channel number of the heat sink(N = 1, 2, 4, 5, 10) and the air flow rate(Q=25, 42, 54m³/min) were varied. The bio sample was replaced with water, and the volume of water is 4mL. The size of the heat sink is 80x73x150mm and the material is aluminum. When cooling the sample, the surface temperature, the air temperature and the sample temperature were highly dependent on the number of channels and the flow rate. However, when the sample is heated, the surface temperature, air temperature and sample temperature do not depend on the number of channels and the flow rate. It was found that the conditions for satisfying the minimum temperature of 15℃ or less when cooling the sample were the number of channels N≥5 and the flow rate Q≥42m³/min. When heating the sample, the conditions to satisfy the maximum temperature of 82℃ or more are the number of channels N≤5 and the air flow rate Q≤42m³/min.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.668-675
• /
• 2003

In this paper, we propose an enhanced p-cycle (preconfigured protection cycle) scheme for WDM mesh networks with QoS constraints. In the previous researches on p-cycle, it is assumed that user's connection has a hi-directional connectivity and the same bandwidth on both direction. Therefore it is difficult to apply p-cycle based link protection to uni-directional connections for multicasting or asymmetric broadband multimedia communications with hi-directional connectivity. And it didn't consider QoS of backup path. We enhanced the p-cycles to accomodate uni-directional connections for multicasting or asymmetric bandwidth communications with hi-directional connectivity. And we propose a selection procedure of p-cycle to assure QoS of backup path. We were able to reduce a required backup bandwidth by applying a uni-directional p-cycle concept to asymmetric broadband multimedia communication environment. The proposed p-cycle selection procedure is applied to the U.S. sample network to evaluate whether the configured p-cycles can support QoS constraint of working path and backup path.

• Journal of the Korean Statistical Society
• /
• v.25 no.3
• /
• pp.445-456
• /
• 1996

In this paper, we derive unbiased estimators for the sensitivities of expected performance measures in a Markov renewal process. We restrict our derivation to the performance measures during a busy cycle and apply smoothed perturbation analysis method to find those esti-mators. The results show all the terms in the derived estimators can be obtained from a single sample path.

• Corrosion Science and Technology
• /
• v.3 no.6
• /
• pp.251-256
• /
• 2004

Exposure of zinc samples in simulated acid rain solution (SARS) was investigated under a periodic wet-dry conditions using an AC impedance technique. The periodic wet and dry exposure consisted of the immersion of zinc samples in SARS for one hour followed by exposure to 7 hours drying at 60% RH. Phases of the corrosion products were indentified by X-ray diffraction (XRD). The influence of relative humdiity (RH), temperature, and surface inclination on the atmospheric corrosion of zinc is described. The reciprocal of polarization resistance (1/Rp) decreases rapidly during the initial stages then slowly and eventually attains a steady state as exposure time progresses. The average of reciprocal of polarization resistance per cycle, (ARPR) was calculated and found to decrease as number of exposure cycle increases. An increase of temperature enhances the corrsion rate of zinc. The values of ARPR, of a sample inclined at 30 o are lower than those for a sample oriented horizontally. The experiment result shows a pronounced dependence of reciprocal of polarization resistance on RH. Exposure in the presence of carbonate anions gives rise to more protective corrosion products than in nitrate anion solution. The corrosion mechanism during the initial stages of atmospheric zinc corrosion under wet-dry cyclic conditions is suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1921-1924
• /
• 2007

In order to measure the superconducting transition temperature, the critical current and the alternating current(AC) loss on short samples of high temperature superconductor, a cryocooler cooled cryostat has been designed and built. Two closed-cycle coolers provide cooling with an ultimate sample temperature below 16K. Temperature regulation is provided by 50W of electrical heater that opposes the cooling power from the cold heads. Temperature control feedback is by means of a cernox temperature sensor co-located with the heaters on the second stage of the cold head. Additional temperature sensors are located on the sample mount(B1), on the CVI cold head(B2) and on the Dakin cold head(B3). AC losses on the sample high temperature superconductor were measured at 30K so that the developed device performance was evaluated. In this paper, the design, fabrication and test results on the cryocooler cooled cryostat are presented.

• Management & Information Systems Review
• /
• v.29 no.4
• /
• pp.23-44
• /
• 2010

This study examines the value-relevance of accruals and discretionary accruals. Also, by examining the effects of the corporate life-cycle on these relationship, this study is able to provide evidence of the value-relevance of accruals and discretionary accruals measures in the economic context of life-cycle theory. This study uses results based on life-cycle classification methods developed by Anthony and Ramesh(1992), adjust Jones model and Dechow Dechev(2002) model. We classify firms using individuals variables(sales growth, capital expenditure growth, employee growth) and then use a composite score obtained from all variables for classification. Our sample consists of 272 firms listed in the Korean Stock Exchange during 14 years(1996-2009). Our final sample for regression variables consists of 2,448 firm-year observations. This evidence implies that the value-relevance of accruals and discretionary accruals in the growth and mature stage can have positive impact on the price but in the decline the value-relevance of accruals and discretionary accruals can have negative impact on the price. The results mean that discretionary accruals communicate managements' private information in the growth stage, but. earnings management in the decline stage. The results of this study suggest that corporate life cycle stages influence the value-relevance of accruals and discretionary accruals measures.

• KSBB Journal
• /
• v.18 no.2
• /
• pp.122-126
• /
• 2003

Multi-cycle chromatographic separation of Iysozyme from egg white was investigated. Multi-cycle chromatography was performed by repeated cycling(one cycle: resin equilibration, sample loading, washing, elution). Two types of cation exchange resins, Cellufine CM C-200 and Bio-rex 70, were used to determine the optimum condition for the separation of Iysozyme by multi-cycle chromatography. The resin was equilibrated in 20 mM Na-phosphate buffer(pH 7.0). Chromatograms of UV absorbance levels of every cycle were compared to confirm the eluting ability of Iysozyme in the two types of gel. Collected samples from eluting regions in every cycle were assayed by 15% SDS-PAGE.