• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.350-358
• /
• 1998

To determine the optimum application of fertilizers for the cultivation of tomato in plastic film house, eighteen soils which contained different salt contents were taken from four different areas under plastic film house cultivation, Youngdong, Boeun, Cheongweon county, and Cheongju city. The dry weight and the amount of N, P, and K uptakes of tomato in the plot with no fertilization were considered as the factors representing the fertility of the soil. The differences in the dry weight and in the amounts of N, P, and K uptakes of plants between the plots with fertilization and with no fertilization were considered as the factors representing the total effect of fertilizer and the effects of fertilizer N, P, and K, respectively. These factors of soil fertility and fertilizer effects were estimated by correlation and regression with the chemical properties of the soil in order to find the critical levels and recommended method for optimum fertilization of tomato. The standardized partial regression coefficients of inorganic nitrogen ($NO_3-N+NH_4-N$) contents in soil for the factors of fertility ranged from 247 to 1,159, showing the best, while those of the others ranged from 0.02 to 4.02. Those of inorganic nitrogen ($NO_3-N+NH_4-N$) contents in soil for the electrical conductivity were also the best and were ranged from 35.2 to 36.0 compared with the values of less than 1.0 of the others. These results demonstrate that the content of inorganic nitrogen in the soil is the best index for both soil fertility and electrical conductivity of the soil. The critical level of inorganic nitrogen ($NO_3-N+NH_4-N$) in the soil for maximum productivity with zero value of fertilizer effects for tomato, estimated through Cate-Nelson split method was $220mg\;kg^{-1}$. This was the same value as evaluation for the cultivation of chinese cabbage. In conclusion, for optimal application of fertilizer in plastic film house, 1) no fertilization is recommended when the contents of inorganic nitrogen in the soil is more than $220mg\;kg^{-1}$; however, 2) in the case of less than $220mg\;kg^{-1}$ of inorganic nitrogen content in the soil, the optimal level of fertilization could be estimated through the regression equation between fertilizer effects and content of inorganic nitrogen in the soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.8-14
• /
• 2006

High phosphate accumulations in greenhouse soils have been considered as a new agricultural problem in Korea. The effects of silicate on changes in phosphate fractions and on the yield of Chinese cabbage without P fertilization were investigated by pot experiment. For this experiment, P-accumulated soil was selected (Total-P; $2140mg\;kg^{-1}$). Three levels of silicate (0, 2, and $4Mg\;ha^{-1}$) without P fertilization and P fertilizer without silicate application (Si0+NPK) were applied in 1/2000a pots. The same amount of nitrogen and potassium fertilizers were applied to the all pots. The application of $4Mg\;ha^{-1}$ of silicate greatly increased the yield of Chinese cabbage by 25% compared to Si0+NPK treatment. Although there is no significant difference in plant P absorption among all the treatments, the uptake of P in the $4Mg\;ha^{-1}$ silicate application was significantly higher than Si0+NPK treatment due to increase in yield. The content of available $SiO_2$ in soil increased with increasing silicate application rates. The Si concentration of plant showed a positive correlation with available $SiO_2$ contents in soil and the yield of Chinese cabbage. Total P greatly decreased with increasing rates of silicate application, yet the change in available P content was not significant. The Si0+NPK treatment increased the content of Ca-P by 11%, however, which was decreased by 27% in the $4Mg\;ha^{-1}$ silicate application. Therefore, the effect of silicate on reducing total-P was mainly attributed to the change in concentration of Ca-P. Our results suggest that the application of silicate in P-accumulated soils not only increase the crops yield but also reduces phosphate accumulation.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.43-54
• /
• 1986

Back-pyun is a kind of rice cake made by steaming rice flour added sugar, water and salt and garnished with shredded chestnuts, dates, mushrooms and pinenuts. The Back-pyun has been widely used in Korean celebrations. This study aimed to compare and determine the effects on sensory characteristics and texture of Back-pyun 1) when the proportion of glutinous rice, added i.1 making Back-pyun, is 0%, 5%, 10%, 15%, 20%, 25% and 30% 2) then it reheated after storage for 0,24, 48 and 72 hours. Evaluation was conducted through sensory evaluation and objective evaluation. The results are as follows : 1. In sensory evaluation, color of Back-pyun turned yellow as the addition level of glutinous rice increased and then by reheating after storage for 24, 48 and 73 hours. Coarseness was not significantly different as the addition level of glutinous rice increased before storage. But Back-pyun reheated after storage for 24,48 and 72 hours were significantly different by the addition level of glutinous rice. Softness, dryness and crumblyness tended to decrease as the addition level of glutinous rice increased and by reheating after storage for 24, 48 and 72 hours. The most favorite tendency on the appearance was at the addition level of glutinous rice of 5%. Texture and overall preference were better at the addition level from 10% to 20% than any other levels. 2. Rheometer measurement indicated that compression force, gumminess ana chewiness tended to increase as the addition level of glutinous rice increased and decrease by the storage conditions. But work ratio and recovered height did not have much effect the addition level of glutinous rice and the storage conditions. Compression force of Back-pyun (not reheated) tended to increase by the storage time and the addition level of glutious rice. Especially it showed remakably increasing tendency during 24 hours storage (at $4^{\circ}C$) 3. Moisture content tended to increase by the addition level of glutinous rice and decrease by the storage time. But moisture content of Back-pyun reheated after storage for 24 hours stowed the increasing tendency. 4. Softness of Back-pyun had significant relationship with compression force and work ratio. Dryness and crumblyness had significant relationship with work ratio. Therefore compression force and work ratio represented the texture of Back-pyun.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.809-815
• /
• 2015

In this study, we confirmed biological compounds from methanol (MeOH) extract of processed Polygoni Multiflori Radix (PPMR), and the radical scavenging effect and oxidative stress protective activity of MeOH extract of PPMR were investigated under in vitro conditions using LLC-$PK_1$ renal epithelial cells. In HPLC analysis, MeOH extract of PPMR contained four species of biological compounds named 2,3,5,4'-tetrahydroxystilbene 2-O-${\beta}$-D-glucoside, emodin, chrysophanol, and rhein. 2,3,5,4'-Tetrahydroxystilbene 2-O-${\beta}$-D-glucoside was detected as the main compound in PPMR as 115.02 mg/kg. MeOH extract of PPMR showed 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulphonic acid) diammonium salt (ABTS), and hydroxyl radical scavenging activities in a concentration- dependent manner. In particular, upon $50{\mu}g/mL$ of PPMR extract treatment, DPPH, ABTS, and hydroxyl radical scavenging activities were approximately 48.4%, 57.9%, and 81.2%, respectively. LLC-$PK_1$ cell viability declined in response to oxidative stress induced by pyrogallol, sodium nitroprusside (SNP), and morpholinosydnonimine (SIN-1) generators of NO, $O_2{^-}$, and $ONOO^-$, respectively. However, MeOH extract of PPMR significantly and dose-dependently inhibited oxidative-stressed LLC-$PK_1$ cell cytotoxicity. In fact, upon $50{\mu}g/mL$ of PPMR extract treatment, LLC-$PK_1$ cell viabilities were approximately 82.1%, 89.1%, and 77.6% compared to stress levels induced by pyrogallol, SNP, and SIN-1, respectively.

• Korean Journal of Plant Resources
• /
• v.32 no.5
• /
• pp.423-432
• /
• 2019

In order to select potential plant resources as functional materials and natural antioxidants, we evaluated antioxidant activity and serotonin derivatives of safflower germplasm collected from five countries. N-(p-Coumaroyl) serotonin (CS) and N-feruloylserotonin (FS) were analyzed by using Ultra Performance Liquid Chromatography (UPLC). Total polyphenol content (TPC) was determined by Folin-Ciocalteu method and antioxidant activities were estimated by 2,2-diphenyl-1-picryl-hydrazil (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) diammonium salt (ABTS), Ferric reducing antioxidant power (FRAP) and Reducing power (RP) assays. The TPC showed a range of 28.25 to $90.53{\mu}g$ gallic acid equivalent (GAE)/mg dried extract (DE). DPPH, ABTS, FRAP and RP assay were in the range of 18.76 to 93.98, 48.91 to 163.73, 3.80 to 132.29 and 26.32 to $80.08{\mu}g$ ascorbic acid equivalent (ASCE)/mg DE, respectively. Among the five countries, safflower seed collected from Iran had the highest levels of serotonin derivatives and antioxidant activities than other countries (p<0.05). CS showed high correlation with TPC, ABTS and DPPH (r=0.673,0.727,0.820), and FS showed high correlation with DPPH (r=0.740). Accessions IT321214 and IT321215 could be useful for development of new functional materials and could be used as a source of valuable natural antioxidant materials.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.56-63
• /
• 2011

Durum wheat semolina was added into wet-milled rice flour in order to improve chewy texture, firm bite ("al dente"), and resistance to overcooking of the ordinary rice noodles. Wet noodles were prepared by mixing 0 (control), 5, 10, 15, and 20% (w/w) of semolina per semolina and rice flour mixtures. Vital gluten (4%, w/w) and salt (2%, w/w) were added to form the pliable strands of wet noodles and final moisture contents of the raw mixtures were equalized at 45%. Pasting properties of the suspended flour mixtures as measured by the Rapid Visco Analyser (RVA) showed slight increases (up to $1.2^{\circ}C)$ in pasting temperatures along with the considerable decreases in peak viscosities as semolina increased at over 15%. Reduced shear thinning and retrogradation of the starch solution that leads to hardening of the cooked noodles were indicated by lowered breakdown viscosities and gaps between finaland setback viscosities from the RVA viscogram as semolina increased at over 10%. Reduced water uptake and turbidity increases of the cooking water as caused by the soluble starches from the noodle were also noted as the content of semolina increased. More or less significant (p<0.05) decreases in colorimetric L (lightness) value of the raw- and cooked noodles were observed as semolina increased while a- (redness) and b (yellowness) values were rather increased at the same moment. Textural properties of the cooked noodles such as hardness, springiness, cohesiveness, gumminess, and chewiness from TPA tests were significantly (p<0.05) influenced by added semolina, even at 5%-levels or more. It can be concluded that addition of semolina into rice flour could provide easy handling of the wet noodles without distortion during transportation, integrity and firm bite of the cooked noodles, and less loss of starch to the cooking water in comparison with the ordinary rice noodle. It was finally suggested that optimum level of the semolina in the product was approximately 10% for the quality wet rice noodle products.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.278-285
• /
• 2019

The experiment was implemented to gain basic data for stable proso millet (Panicum miliaceum L.) production through germination viability and establishment uniformity based on seed refining under seed selection with specific gravity of proso millet seed. Seeds of three proso millet cultivars were carefully selected by adjusting NaCl into 9 levels (1.000, 1.005, 1.010, 1.015, 1.020, 1.025, 1.030, 1.035, 1.04 g·L^-1), and their standard germination rate, seeding quality and field emergence rate were investigated. Proso millets showed heavier thousand seed weight as specific gravity high. In standard germination, all of the 3 cultivars of selected seeding showed at least 91% germination rate. With respect to the 1.040 g·L^-1 selection by specific gravity, 'Hwanggeum' had 98.9%, 'Ibaekchal', 99.4%, and 'Hwangsilchal', 98.9%, recording the highest. Seeding quality was investigated and it was found that, compared with the non-selected seeds, selected seeds had longer plant heights and averaged 2.0, 2.2 and 1.9 cm, respectably. In terms of leaf length, only 'Hwanggeum' and 'Ibaekchal' showed distinctive differences. No significance was found in stem diameter and SPAD. The seeds selected using specific gravity all had longer or heavier average root length, root weight and stem weight. Compared with non-selected seeds, the specific gravity of 1.040 g·L^-1 had longer root lengths of 2.9, 3.0 and 2.9 cm. 1.040 g·L^-1 was also found to have the heaviest root weight, and stem weight. The field emergence viability investigation found significance solely in the mean emergence time (MET) by the cultivar. High significance was found in percent emergence (PE) and emergence rate index (ERI) in the specific gravity for the selection of seeds. All of the three cultivars showed higher PE and ERI as specific gravity selection high. The 1.040 g·L^-1 specific gravity selection had the highest PE of 90.7, 85.3 and 92.8%. For productivity increase based on improved proso millet germination rate and enhanced establishment uniformity, it seems favorable to employ 1.040 g·L^-1 specific gravity selection using salt solution.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.293-302
• /
• 2023

This study evaluated the acute toxicity induced by oxolinic acid (OA), neomycin-oxytetracycline combination (NEO-OTC) and florfenicol (FF) administered to guppy (Poecilia reticulata) by comparing standard formulations with commercial preparations (COOaqua curinpotion, COOaqua terafinpotion and COOaqua profenpotion, respectively) for ornamental fish at concentrations of 2-4%. NEO-OTC exhibited the highest acute toxicity in guppy, with no difference observed between the pstandard formulation and commercial preparation (LC₅₀ = 126.08 mg/L and 112.44 mg/L, respectively). OA acute toxicity was assessed in the form of sodium salt, with an LC₅₀ of 504.61 mg/L for the standard formulation and a slightly increased toxicity of 316.11 mg/L for the commercial preparation. In contrast, no mortality was observed during the 96-hour exposure period with the standard formulation in the form of oxolinic acid. The acute toxicity of FF was measured to be above 1,000 mg/L for the standard formulation; however, the commercial preparation significantly increased to 158.53 mg/L. These results indicate that toxicity can significantly increase in commercial formulations, especially those with low levels of active ingredients. This is presumed to be attributed to the organic solvents or solubilizing agents present in the commercial preparations, which may enhance toxicity. Additionally, guppy infected with Aeromonas salmonicida were effectively protected against mortality by administering OA, NEO-OTC and FF at concentrations of 50 mg/L, 100 mg/L and 15 mg/L, respectively, for 2 hours and at half the dose for 24 hours. This result indicates that liquid formulations containing low concentrations of antibiotics may partially increase toxicity, but there is no problem in effectively treating diseases in ornamental fish.

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.35-41
• /
• 1970

The experiment was conducted at the salt concentration of 0.5% and 1% end of April, respectively, in low and high-salty and the non-salty areas of silt loam with the Nongkwang, rice variety. The factorial design with confounding blocks of 3 levels each of 10, 15 and 20 kg of N, 8, 12 and 16kg of phosphate and potash, respectively, per 10a was applied. 1. N applications increased by 1.5 and 2 times with the fixed amount of $P_2O_5$ and $K_2O$ (8kg/10a each) increased the proportion absorbed to the applications of N in both non salty and low-salty areas. It was observed that the absorption of Ca and Si was inhibited by either an increased treatment of N alone or combination with the other nutrients in the salty area. 2. In the non-salty area, an increased applications of standard amount of N, $P_2O_5$ and $K_2O$ respectively did not increased the yields. Doubling the application of $K_2O$ resulted in a decreased yield. 3. Applications of additional of 1.5 and 2 times the 10 kg of N per 10a increased the rice yields 12% and 21% respectively, in the low-salty area. An increased application of $P_2O_5$ and $K_2O$ failed to bring about an increased yield. 4. Increasing the application of N gave a significant increased in the yield of rice grain and 1.5 times of N applications were seemed profitable on the high-salty area. Although an increased applications $P_2O_5$ and $K_2O$ seemed to increase the yields of grain, no significant increase was observed. 5. An increased application of N increased the number of panicles up to 1.5 times the standard amount in the non-salty area, but no further increase resulted by doubling the application. The number of panicles was increased in proportion to the increased application of N in both low and high-salty areas. An increased application of $P_2O_5$ increase the number of panicles per unit area in each experimental plot while that of $K_2O$ had no effect but rather decreased the number. 6. The effect of an increased application of N decreased the weight of panicle in the non-salty area, but when the application was increased to 1.5 times or more an increased weight of panicle resulted in both salty areas. Doubling the application had approximately the same effect as 1.5 times the application. Increasing the applications of $P_2O_5$ and $K_2O$ had no effect on the panicle weight in the experimental plots. Increasing the applications of N, $P_2O_5$ and $K_2O$ did not effect the weight of 1,000 grains produced in the non-salty and salty areas. Increasing the application of N decreased the number of grains per panicle in the non-salty area but increased the number of grains per panicle in either salty areas. 7. The ratio of matured grains was highest in the low-salty area and the lowest in the high-salty area. An increased N applications decreased the ratio of matured grains in the non-salty area. No effect was observed in both low and high-salty areas. Increased the $P_2O_5$ and $K_2O$ application showed no effect on the ratio of matured grains in the experimental plots. 8. Increased applications of N, $P_2O_5$ and $K_2O$ was observed not to change the percentage of milling recovery in any experimental plots. Broken rice was increased equally by an increased application of N in the non-salty and salty areas but more remarkably so in the former. 9. Increased applications of N increased the straw production equally in the non-salty, low and high-salty areas. However, no increased production was observed from heavier applications of $P_2O_5$ and $K_2O$. Additional N applications reduced the rate of rough grain weight v.s. straw weight in the non-salty area but increased the ratios in both low and high-salty areas. Additional $P_2O_5$ and $K_2O$ had no effect with the ratio.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.