• Journal of Sensor Science and Technology
• /
• v.32 no.3
• /
• pp.159-163
• /
• 2023

Salt cores have attracted considerable attention for their application to the casting process of electric vehicle parts as a solution to ecological issues. However, the salt core still has low mechanical strength for use in high-pressure die casting. In this study, we investigated the improvements in the bending strength of KCl-based salt cores resulting from the use of reinforcing materials. KCl and Na₂CO₃ powders were used as matrix materials, and glass fiber and carbon fiber were used as reinforcing materials. The effects of carbon fiber and glass fiber contents on the bending strength properties were investigated. Here, we obtained a new fiber-reinforced salt core composition with improved bending strength for high-pressure die casting by adding a relatively small amount of glass fiber (0.3 wt%). The reinforced salt core indicates the improved properties, including a bending strength of 49.3 Mpa, linear shrinkage of 1.5%, water solubility rate of 16.25 g/min·m² in distilled water, and hygroscopic rate of 0.058%.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.92-93
• /
• 2001

Bacillus sp. KYJ 963, which was isolated from Korean salt-fermented anchovy (anchovy-jeot), produces an extracellular ${\beta}$-amylase. The analysis of the digestion products of substrates by thin layer chromatography from the purified protein revealed that the enzyme could not hydrolyze maltose or ${\alpha}$-cyclodextrin. In the amino acid composition analysis, the major characteristic of the ${\beta}$-amylase was the high proportion of amino acids that possess short side chain such as glycine and alanine.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.4
• /
• pp.363-376
• /
• 2002

In order to establish the processing conditions for salt-fermented liquefaction of anchovy(Engrulis japonica), changes in the amino acid composition from oligopeptides during fermentation periods were analyzed. Experimental sample A: chopped whole anchovy, adding 20% water, heating at $50^{\circ}C$ for 9 hrs and then adding 10% NaCl. Sample B: chopped whole anchovy, adding 20% water, heating at $50^{\circ}C$ for 9 hrs and then adding 13% NaCl. Sample C: chopped whole anchovy adding 13% NaCl. Sample D: whole anchovy adding 17% NaCl. The total amino acids from oligopeptides in fermented liquefaction of anchovy increased in early fermentation period and reached highest level, and then they declined irregularly during fermentation. Their maximum amounts were just after heating at $50^{\circ}C$ for 9 hrs in sample A, after 15 days in sample B, and after 60 days in samples C and D. The fermented liquefaction of anchovy extracts were rich in glutamic acid, aspartic acid, proline, glycine, alanine, lysine and valine. However, the contents of most amino acids fluctuated by the experimental specimens and fermenting periods. Among them glutamic acid was the most abundant amino acid which was occupied $0.6{\sim}27.7%$(average 24.0%) in the content of total amino acids from oligopeptides. The contribution of the amino acid composition from oligopeptides to extractive nitrogen was occupying average 20.8 and 17.5% in rapid- and low salt-fermented liquefaction(sample A, B and C) and traditional fermented liquefaction(sample D), respectively.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.119-135
• /
• 2004

Objective: The purpose of this study is to investigate the mechanism and effect of moxibustion with salt objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with salt. Methods: We have selected of the moxibustion with salt of indirect moxibustion. We make a comparative study of the thermodynamic characteristics of moxibustion with salt as a kind of the 4 salt. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results: 1. We make out that it is not significantly change the time of thermal conduction of moxibustion with salt as a kind of 4 salt. 2. The heating period of Refined Salt was long and that of Sun-dried Salt was a short time respectively. The heating period of maximum tamperature is high Sun-dried Salt, Mechanical Salt and Refined Salt orderly. Maximun heating speed in the heating period was $0.151{\sim}0.184^{\circ}C/sec$ and at the same tendency of the maximum temperature in the heating period. 3. The retaining period was shorter than the heating period respectively, that is 15~24% of the combustion time of in the heating period. We make out that it is not significantly different the time of the retaining period as a kind of 4 salt. The mean temperature of retaining period was $43.2{\sim}48.1^{\circ}C$, that was extraordinarily high temperature. 4. We make out that it is not significantly different the time of the cooling period as a kind of 4 salt. The cooling period was measured 223~233sec. Beacuse the same density and size of moxa combustion was made an experiment. 5. The effective combustion time of Refined Salt is longer(259sec) than that of Sun-dried Salt(173sec). It is significantly different the time of the combustion time as a kind of 4 salt. 6. It is significantly different the Sample deviation of the combustion time as a kind of 4 salt because of the water content of the 4 salt individually. Conclusions: As the base on this study, we obtained the conclusion as the follows. The salt of moxibustion with salt was fitted for Sun-dried Salt due to making to Mechanical Salt recently. The Refined Salt is composition rate to another and small size comparatively. So It was fitted for the salt of moxibustion with salt. It is necessary to study continuously about the more suitable moxibustion with salt and quantitative analysis about the moxibustion with salt.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.4 s.58
• /
• pp.9-20
• /
• 2005

The purpose of the study was characteristics of secondary pollutants of $PM_{10}$ collected in pocheon between August 2002 and June 2003. The ambient concentrations of $PM_{10}$ mass, 9 water-soluble anions and cations, and 13 bulk composition trace elements were determined from filter samples collected by $PM_{10}$ high volume air sampler(UV-15H, Graseby-Anderson Co., USA). During this period average $PM_{10}$ mass concentration was $83.8{\mu}g/m^3(49.8{\mu}g/m^3\~111.6{\mu}g/m^3)$ in Pocheon. Mechanism for transformation of secondary pollutants by soluble ion components is divided into two categories; $NaNO_3$ type by the reaction of sea salt and $HNO_3$ in the atmosphere, and nitrate salt or phosphate salt type such as $(NH_4)_2SO_4,\;NH_4NaSO_4,\;and\;(NH_4)_2SO_4(2NH_4O_3)$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.451-451
• /
• 2000

This study aims for the optimization of process conditions in a fixed-bed catalytic reactor system with a circulating molten salt bath, in which partial oxidation of propylene to acrolein takes place. Two-dimensional pseudo-homogeneous model is adopted with estimation of suitable parameters and its validity is corroborated by comparing simulation result with experimental data. The temperature of the molten salt and the feed composition are found to exercise significant influence on the yield of acrolein and the magnitude of hot spot. The temperature of the molten salt is usually kept constant. This study, however, suggests that the temperature of the molten salt must be axially adjusted so that the abrupt peak of hot spot should not appear near the reactor entrance. The yield of acrolein is maximized and the position and the magnitude of hot spot are optimized by the method of the iterative dynamic programming (IDP).

• Journal of the Korean Institute of Rural Architecture
• /
• v.2 no.2
• /
• pp.63-73
• /
• 2000

The objectives of this study are understanding on the type and the characteristic of the architecture in the saltern. At result, there are warehouse of the salt, residence of salt man and office building. These architectures are clearly different from Korean traditional architecture and constructed in special area (a saltern), on special purpose. These are not excellent architectural form, but materials and forms of these architectures are reasonably suitable for the regional characteristic and the function. Today, the architecture in the saltern, are gradually disappear, therefore the researches and the memories are meaningful in this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.695-698
• /
• 2000

This paper present the result of the investigation, the distribution of salt contamination with the influence of geographical condition. To get the ESDD data, a conventional brush washing method was adapted, and IC(ion chromatography) was used to measure the quantity of anions, such as Cl$\^$-/ and SO$_4$$\^$2-/. And we make an analysis on the distribution of salt contamination with the increase of distance from shore. With 10 month ESDD data, we seek the 95% ESDD value with interpolation method. With these analyses, we had obtained the formulation concerned with the distance from sea. And could know the composition of contamination.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.419-423
• /
• 2011

BACKGROUND: Inorganic component is made up largely of salt, because the criteria are difficult to split into domestic and imported ingredients, organic examined the fatty acid composition is to see a possible use as a marker using gas chromatography-mass spectrometry (GC-MS). The 14 domestic samples and 8 imported samples were collected from China, India and other countries were investigated on item of 37 fatty acids. METHODS AND RESULTS: The major components were six species, myristic acid ($C_{14:0}$), palmitic acid ($C_{16:0}$), palmitoleic acid ($C_{16:1}$), stearic acid ($C_{18:0}$), oleic acid ($C_{18:2,n9}$), linoleic acid ($C_{18:2,n6}$) among detected twenty fatty acids including 9 unknowns. The content of palmitic acid were highest as 25.2 to 50.8% of total fatty acids contents. Domestic has seen the most amount of salt in the Taepyeong salts $250.8{\mu}g$/100g, imports $135.2{\mu}g$/100g salt in Chinese Weifang salts showed the lowest content. CONCLUSION(s): The total fatty acid content has seen the most amount of salt in 352.3 ug/100g Christmas island salts showed the lowest content of $164.0{\mu}g$/100g, as a result it is difficult to distinguish the domestic salts and imported by the composition of fatty acid.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.607-614
• /
• 2011

This study was conducted to understand the quality characteristics of 20 kinds of commercial salt-fermented anchovy & sand lance sauces by measuring their the chemical compositions and 9 biogenic amines (tryptamine, 2-phenylethylamine, putrescin, cadaverine, histamine, tyramine, serotonin, noradrenaline, spermine) contents. The commercial salt-fermented anchovy sauces contained $65.84{\pm}0.11{\sim}70.60{\pm}0.21%$ of moisture, $20.50{\pm}0.41{\sim}25.60{\pm}0.42%$ of salinity, $0.98{\pm}0.01{\sim}2.05{\pm}0.05%$ total nitrogen, and $1,011.77{\pm}0.00{\sim}1,724.56{\pm}9.72mg/100mL$ of amino nitrogen. Histamine was the major amine detected in salt-fermented fish sauces and it was varied from 421.27 to 1,507.18 mg/kg in salt-fermented anchovy sauces, whereas commercial salt-fermented sand lance sauces contained $67.87{\pm}0.28{\sim}69.63{\pm}0.17%$ moisture, $22.46{\pm}0.28{\sim}26.11{\pm}0.00%$ salinity, $0.92{\pm}0.01{\sim}1.71{\pm}0.05%$ total nitrogen, $878.20{\pm}0.00{\sim}1430.09{\pm}9.77mg/100mL$ amino nitrogen and 419.10~1,025.50 mg/kg histamine, respectively. These findings suggest that the products of salt-fermented fish sauces have pretty much the same in ingredient composition and meet domestic criteria but most those had high biogenic amine contents. Therefore, ingredient composition and biogenic amine content of commercial salt-fermented fish sauce products were practicable evaluation of the quality characteristics.