• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.27-31
• /
• 2000

A series experiments were performed to evaluate mechanical behavior of non-oxide boride type ceramics formed on the AISI 1040 plain carbon steel. Boronizing was performed in a slurry salt bath consisting of borax, boric acid, and ferro-silicon at $950^{\circ}C$ for 2-6h. The AISI 1040 steel used as substrate material was containing 0.4%C, 0.13%Si, 0.65%Mn, 0.02%P, 0.014%S. The presence of non-oxide boride type ceramics $Fe_2B $ and FeB formed on the surface of steel was confirmed by metallographic technique and X-ray diffraction (XRD) analysis. The hardness of borides measured via Vickers indenter with a load of 2N reached a microhardness of up to 1800 DPN. The hardness of unborided steel was 185 DPN. The fracture toughness of borides measured by means of Vickers indenter with a load of 10N was about 2.30 MPa.$m^{1/2}$. The thickness of boride layers ranged from 72$\mu\textrm{m}$ to 145$\mu\textrm{m}$. Boride layers have a columnar morphology.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.437-441
• /
• 2003

This research investigated the effects of processing conditions and natural antimicrobial materials on quality of freeze-dried, seasoned and roasted Alaska pollack (Theragra chalcogramma). The optimum dipping time and moisture contents of freeze-dried Alaska pollack were 1 sec in $1\%$ salt solution, $48.6\%$ respectively. The freeze-dried, seasoned and roasted Alaska pollack product showed high sensory value. As sterilization time increased over 30 mins in water bath at $100^{\circ}C$ the browning degree of the freeze-dried, seasoned and roasted Alaska pollack product increased. Among various antibrowning agents, $3\%$ corn starch was better in preventing browning than sporix treatment. The freeze-dried, seasoned and roasted Alaska pollack product added with lactate Ca and catechin had the antimicrobial, and the VBN contents of the product showed low level.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.114-119
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation towered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions'inhibition power from cation's lowering: the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^->Cl^-> Br^-I^-$. The activation energy(E$_{a}$) lot the dyeing was in the order of $F^->Cl^-> Br^-I^-$ but the dye-uptake on the fabric and the activation free energy$(\Delta{G}^*)$, the real energy barrier fort the reaction, were in the order of $F^->Cl^-> Br^-I^-$ because the strength of the interaction of the anions with sodium cations was the salute as the order of the latter. In other words F$^{[-1000]}$ exerted the weakest electrostatic force on $Na^+$ and competed with the dyestuff anions least of all. The decrease in $\Delta{S}^*$ may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Brёnsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.g.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.2
• /
• pp.27-32
• /
• 1989

The effect of quenchant temperature on the surface residual stress was studied for AISI 8620 steel. Specimens were carburized at $900^{\circ}C$ in all case type furnace using a gas-base atmosphere of methanol cracked and liquefied petroleum gas, and then subjected to single reheat quenchant in oil or salt bath in the temperature range of $60^{\circ}C$ to $300^{\circ}C$. After carburizing and reheat Quenching, residual stress was measured by the hole drilling method. Experimental results showed that the surface residual stress was increased as the quenchant temperature was raised. This is in contrast to the fact that the formation of phase of low transformation strain such as bainite results in lower surface compressive stress. The greater compressive stress observed in specimens Quenched at higher temperature may be attributed to the shifting of the transformation start point farther from the surface, as was reported in other carburizing steels.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.114-119
• /
• 2010

There are a number of studies on chemically strengthened glass. Most of them are strengthened in molten salt bath below transformation range of glass. This research is distinguished from the aforementioned studies in that single $KNO_3$ powder was used by employing screen printing technique. In this study soda-lime-silicate(SLS) glasses for bulletproof glass application with various thicknesses were used. The maximum value of the bending strength is 791MPa heat treated at $480^{\circ}C$, which is about 4.3 times higher than the parent glass, which is the highest strength of all soda-lime glasses. In this study, it is also observed that Vickers hardness increased to $657H_v$, which is about 15% higher than the parent glass($568.7H_v$) and fracture toughness was not changed. Depth profiles measured by electron probe micro analyzer(EPMA) showed a correlation between the migrations of $K^+$ ions with bending strength of ion exchanged glasses.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.1-13
• /
• 2016

This review deals with one of the surface modification techniques, chemical conversion coating and particularly cerium-based conversion coatings (CeCC) as a promising substitute for chromium and phosphate conversion coating on magnesium and its alloys. The CeCCs are commonly considered environmentally friendly. The effects of surface preparation, coating thickness, bath composition, and e-paint on the corrosion behavior of CeCCs have been studied on the AZ31 magnesium alloy. This review also correlates the coating microstructural, morphological, and chemical characteristics with the processing parameters and corrosion protection. Results showed that the as-deposited coating system consists of a three layer structure (1) a nanocrystalline MgO transition layer in contact with the Mg substrate, (2) a nanocrystalline CeCC layer, and (3) an outer amorphous CeCC layer. The nanocrystalline CeCC layer thickness is a function of immersion time and cerium salt used. The overall corrosion protection was crucially dependent on the presence of coating defects. The corrosion resistance of AZ31 magnesium alloy was better for thinner CeCCs, which can be explained by the presence of fewer and smaller cracks. On the other hand, maximum corrosion protection was achieved when AZ31 magnesium samples with thin CeCCs are e-painted. The e-paint layer further restricts and hinders the movement of chloride and other aggressive ions present in the environment from reaching the magnesium surface.

• Textile Coloration and Finishing
• /
• v.12 no.6
• /
• pp.372-379
• /
• 2000

Four kinds of neutral salts with different cations, LiCl, NaCl, KCl, and CsCl, were added to the dye bath to accurately understand the effect of cations on the reactive dyeing of silk with C. I. Reactive Black 5. The cations of salts added lowered the negative surface potential of the silk, improving equilibrium adsorption and the accessibility of the dyestuff to the fiber greatly and speeding up the dyeing rate in the order of $Li^+>Na^+>K^+>Cs^+$. The activation energy$(E_a)$ for the dyeing was in the order of$Li^+>Na^+>K^+>Cs^+$ but the activation free energy$(\Delta{G}^*)$, or the real energy barrier for the reaction, was in the order of $Li^+>Na^+>K^+>Cs^+$ because the degree of the contribution of E$^{a}$ to the activation entropy$(\Delta{S}^*)$ was $Li^+>Na^+>K^+>Cs^+$. It was found from this result that LiCl had the strongest lowering effect on the negative surface potential of silk. The decrease in $\Delta{S}^*$ should be attributed to the loosely bonded activated complex of dyestufffs, cations and fiber molecules at transition state. It was clarified from the Bronsted equation that salts had the ionic strength effect and the specific salt effect on the reactive dyeing.

• Korean Journal of Bronchoesophagology
• /
• v.4 no.1
• /
• pp.64-72
• /
• 1998

This study aimed at observing the effect of diazepam on the contractility of trachealis muscle isolated from canine trachea, possible involvement of central or peripheral type benzodiazepine receptor, and the calcium related mechanism of action of diazepam. Trachealis muscle strips of 15 mm long were suspended in an isolated organ bath containing 1 ml of physiologic salt solution maintained at $37^{\circ}C$, and aerated with 95% $O_2$ /5% $CO_2$. Isometric myography was performed. Diazepam reduced the basal tone concentration dependently, and this inhibitory action was not affected by neither flumazenil, a central benzodiazepine receptor antagonist, nor PK11195, a peripheral benzodiazepine receptor antagonist. Pretreatment with diazepam showed the inhibitory effect on the concentration-response curves to agonists such as bethanechol, 5-hydroxytryptamine and histamine. Diazepam also caused concentration-related inhibition of contraction with potassium chloride 30 mM. The effect of diazepam on the basal tone and potassium chloride-induced contraction with calcium channel blockers were compared. Similar results were obtained in canine trachealis with verapamil, nifedipine and diltiazem. These results suggest that diazepam relax an airway muscle not via specific receptors but by a similar action as calcium channel blockers in canine trachealis muscle.

• The Korean Journal of Pharmacology
• /
• v.27 no.2
• /
• pp.125-133
• /
• 1991

In the isolated rabbit mesenteric artery denuded of endothelium, we characterized the identity of the A23187-induced endothelium-dependent relaxing factor (EDRF) released from the endothelium of rabbit aorta, which is distinct from that of acetylcholine-induced relaxing factor. In the normal physiological salt solution (PSS), the dose-response curves to A23187 and acetylcholine were overlapped together. Their effects were also inhibited by methylene blue. Upon application of hypoxanthine and xanthine oxidase into the bath, the phenylephrine-induced precontraction was transiently increased followed by the sustained relaxation. During the burst of hypoxanthine-xanthine oxidase reaction, the $Ca^{++}$ ionophore, A23187 but not acetylcholine was able to cause an immediate relaxation. However, A23187-induced relaxation was not manifested when precontracted by 50 mM $K^+-PSS$. Nevertheless, in the presence of superoxide dismutase, A23187 could produce an immediate relaxation without accompanying the transient contraction as acetylcholine did during the hypoxanthine-xanthine oxidase reaction. On the other hand, acetylcholine-induced relaxation was more sensitively inhibited by phorbol 12-myristate 13-acetate (PMA) than A23187-induced relaxation. Endothelium-independent relaxation to sodium nitroprusside was not affected by PMA. Based on these results it is suggested that both A23187 and acetylcholine cause the methylene blue-inhibitable endothelium-dependent relaxation, and in addition, A23187 may release a stable EDRF which is resistant to superoxide anion and PMA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.