• International Journal of Safety
• /
• v.11 no.2
• /
• pp.26-28
• /
• 2012

In this thesis, fracture tests were carried out in order to investigate the flexural strength behavior of FRC(fiber reinforced concrete) structures. FRC beams were used in the tests, the initial crack load and the ultimate load of the beams were observed under the static loading. According to the results, the ultimate loads increase with the fiber content, and these tendency is clear in the specimens with large fiber aspect ratio. From the results of the regression analysis, practical formulae for predicting the flexural strength of FRC were suggested.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.295-299
• /
• 2008

This paper discusses tests of factor effect or contrast by the use of saturated design $k^n$ factorial design. The nine nonparametric rank measures in normality test using normal probability pot are proposed. Length's PSE(Pseduo Standard Error) test [4] which relies on the concept of effect sparsity is also introduced and extended to the margin of error(ME) and Simultaneous margin of error(SME).

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.229-235
• /
• 2004

This paper treats accelerated life tests for automotive connector. The contact resistance of connector is explained by some factors; the use time(calender time, real cycle), stresses and loads adapted in auto test. The relationships between contact resistance and some factors are compared and analyzed by regression models in various test conditions; field use-environment, manufacturer's test environment, and accelerated test condition. The consistency between of manufacturer's test and field test is examined. Finally, the future study on accelerated test for automotive connector is presented.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.295-307
• /
• 2007

This paper introduces statistical test principles, statistical procedures and tests for exponential distribution. This paper also shows compliance test plans for success ratio and constant failure rate, and goodness-of-fit tests for Weibull distribution. Moreover, this paper presents procedures for comparision of two constant failure rates, and dependability of products containing reused parts.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.71-83
• /
• 2000

This paper presents accelerated life tests for Type I censoring data under probabilistic stresses. Probabilistic stress, $S_j$, is the random variable for stress influenced by test environments, test equipments, sampling devices and use conditions. The hazard rate, ,$theta_j$, is the random variable of environments and the function of probabilistic stress. Also it is assumed that the general stress distribution is uniform, the life distribution for the given hazard rate, $\theta$, is exponential and inverse power law model holds. In this paper, we obtained maximum likelihood estimators of model parameters and the mean life in use stress condition.

• Toxicological Research
• /
• v.33 no.2
• /
• pp.107-118
• /
• 2017

Although alternative test methods based on the 3Rs (Replacement, Reduction, Refinement) are being developed to replace animal testing in reproductive and developmental toxicology, they are still in an early stage. Consequently, we aimed to develop alternative test methods in male animals using mouse spermatogonial stem cells (mSSCs). Here, we modified the OECD TG 489 and optimized the in vitro comet assay in our previous study. This study aimed to verify the validity of in vitro tests involving mSSCs by comparing their results with those of in vivo tests using C57BL/6 mice by gavage. We selected hydroxyurea (HU), which is known to chemically induce male reproductive toxicity. The 50% inhibitory concentration ($IC_{50}$) value of HU was 0.9 mM, as determined by the MTT assay. In the in vitro comet assay, % tail DNA and Olive tail moment (OTM) after HU administration increased significantly, compared to the control. Annexin V, PI staining and TUNEL assays showed that HU caused apoptosis in mSSCs. In order to compare in vitro tests with in vivo tests, the same substances were administered to male C57BL/6 mice. Reproductive toxicity was observed at 25, 50, 100, and 200 mg/kg/day as measured by clinical measures of reduction in sperm motility and testicular weight. The comet assay, DCFH-DA assay, H&E staining, and TUNEL assay were also performed. The results of the test with C57BL/6 mice were similar to those with mSSCs for HU treatment. Finally, linear regression analysis showed a strong positive correlation between results of in vitro tests and those of in vivo. In conclusion, the present study is the first to demonstrate the effect of HU-induced DNA damage, ROS formation, and apoptosis in mSSCs. Further, the results of the current study suggest that mSSCs could be a useful model to predict male reproductive toxicity.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1313-1323
• /
• 2008

The purpose of this study is to understand behaviors of slopes and determine soil parameters of slopes through the triaxial compression test and the direct shear test. Following results were obtained by comparing and analyzing model tests and analysis programs of slope stability. The safety factors of the Bishop's simple method, the Morgenstern Price method, the Spencer method and the GLE method were similar to each other but safety factors of the Fellenius method and the Janbu method were different from the formers. It was found that the Bishop's simple method, the Morgenstern Price method, the Spencer method and the GLE method could be used for design but attention should be paid to the Fellenius method and the Janbu method since they underestimated safety factor.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.12-17
• /
• 2014

The number of vehicle accidents related to the side impact has increased since 1990 in Korea, thus the side impact test has been performed as one of the major vehicle evaluations of the Korean New Car Assessment Program(KNCAP) in 2003. A total of 77 vehicles of eight different types(compact, small, semi-midsize, midsize, and large sedans and small, midsize, and large sports utility vehicles) were tested in side impact and side pole impact conditions. In this study, the head and thorax injury values(HICs and chest deflections) of the side impact tests performed between 2003 and 2013 were investigated in terms of vehicle type, test year, and test condition. The recent vehicles showed better safety performances(lower injury values) and similar injury patterns were obtained between side impact and pole side impact tests.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.13-19
• /
• 2015

Recently, Child safety has become one of the issue with Q10 dummy representing large child. The objective of this paper was to evaluate performance of three child restraints system (backless booster, high-back booster and without booster) by changing D-ring location in the rear seat. Sled tests were carried out with a Q 10 in 64km/h frontal impact. Before the dynamic sled tests, we assessed dummy positioning with difference in CRS types and height adjustment positions. Dynamic sled test results indicated that there is different performance of CRS types and belt routing. These test results will use as base line data for development CRS safety performance for Q 10.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.1
• /
• pp.116-129
• /
• 2009

The study was conducted to evaluate consumer awareness of the risk elements associated with foods and their information search behavior regarding food safety. The data were collected from 504 adult consumers living in Seoul, Busan, Incheon, Daegu, Daejeon, and Gwangju through a self-administered questionnaire on August, 2006. Frequency analyses, t tests, one-way analysis of variance, and Duncan's multiple range comparison tests were conducted to analyze the responses using SPSS v. 14.0. The levels of recognition of consumers regarding each risk element were generally low. Many respondents answered that they obtained information regarding food safety from TV/radio/newspapers and family/relatives/friends/neighbors. The respondents also indicated that they had strong confidence in the information from family/relatives/friends/neighbors. Additionally, most respondents required information regarding heavy metal contamination, endoctrine disruptors, and avian influenza.