• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.230-231
• /
• 2015

Recently, although researching and developing of safety and maintenance on domestic infrastructure facilities in KOREA are important, there has been very little research regarding on a comprehensive and integrated survey of actual condition. Therefore this study asserts the necessity of the survey process of actual condition by period planning(short-term, middle-term, long-term). The purpose of this study is to investigate current situation and to suggest the whole process method, and to establish survey process of actual condition on domestic infrastructure facilities.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.100-101
• /
• 2021

Facilities with high risk of a disaster or requiring continuous safety management are designated as class-III facility. In order to designate a class-III facility, it is evaluated based on the safety status of the facility, the risk to the building users, and the number of years elapsed of the facility, etc. and this shall be referred to the actual condition survey for the designation of a class-III facility. In the actual condition survey conducted to designate the safety status is calculated by the checklist based on the evaluation scores consisting of five stages each item, and is evaluated in three stages by 'good', 'careful observation', and 'designated review' through the average of the combined scores. Currently, the actual condition survey being conducted applies only structural stability, and the risk factors such as damage to the finish, the risk of cracking, and the type and weight of major structures are not included in the checklist for the actual condition survey, so even if experts think it is dangerous, scores cannot be reflected. Therefore, this study aims to analyze the problems of checklist of the actual condition survey for the designation of class-III facility and to propose an improvement plan for the checklist for the actual condition survey.

• 대한약침학회지
• /
• 제13권3호
• /
• pp.91-102
• /
• 2010

This study was done in order to present clinical trial method for safety and efficacy of Pharmacopuncture. The results were summarized as follow: Objective : The purpose of this study is to verify about safety and effectiveness of pharmacopuncture. Methods : We use questionnaire created by expert group. Survey was conducted to target clinicians who using pharmacopuncture more then 5 years. Results & Conclusion : Pharmacopuncture is effective. and that is widely used in the musculoskeletal diseases. but treatment method has not been organized to objectivity. Some pharmacopuncture causes specific symptoms, but no serious side effects. Generally, pharmacopuncture is effective and safety.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.871-876
• /
• 2010

When surface Concrete Face Rock fill Dam constructs than existent center core type rock fill dam, it is much prevalent form in domestic these day by quality control of that is profitable and weather condition etc. of coreZone. C.F.R.D is less research about seismic survey(Refractional Seismic Prospectin, Resistivity Prospecting) of levee body than fill dam. Thus as C.F.R.D seismic survey is less, safety of that consist is short most development flue is high reason. That is not checking target of minuteness safety diagnosis and so on by short operation period. Wish to analyze inquiry incidental and difference with center core type dam and acquire C.F.R.D preservation administration upper necessary inquiry condition forward hereafter.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.118-125
• /
• 2016

The purpose of this study is to identify issues for an effective safety culture assessment by conducting a case study of an electronics manufacturing plant in Korea. Cooper's safety culture model was used as the assessment method, and Fleming and Hudson's safety culture maturity models were applied as assessment criteria. The results of the safety culture assessment showed that there needs to be a design optimized for study purposes. For example, the correlation between the questionnaire survey and in-depth interview needs to be analyzed. The result of the behavior monitoring should show the relationships with other dimensions. A safety culture maturity model has to be developed to customize the study factors and questions.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.160-167
• /
• 2002

In order to prepare effective safety management program, the evaluation of safety management level must be implemented. But research efforts on the safety management in Korea are limited to evaluate large construction companies. This study is initiated with the purpose of understanding safety management system in medium- and small-sized construction companies. The study performed questionnaire survey with 54 large companies, 46 medium- and small-sized ones. Employing 'Management Safety Health Index' of Maekyung Economic Institute, 34 questionnaire items were chosen by 9 associated experts. Based on the questionnaire survey, analyses were performed to compare safety management level between large companies as well as medium- and small-sized ones.

• 한국안전학회지
• /
• 제37권1호
• /
• pp.30-40
• /
• 2022

The death rate in the construction industry, which is more than twice that of other industries, increases the need to solve chronic safety problems. In a situation in which the safety management measures that have been maintained thus far are unable to reduce construction accidents, the introduction of smart construction safety technology (SCST) that reflects the 4th industrial technology is required for the safety management of workers. Large corporations or public institutions have introduced SCST and are operating pilot sites, but SCST is still in its infancy and there have yet to exist field data regarding necessity and effectiveness. In this study, the concept of SCST, which has still to be established, is defined, and the actual condition of SCST was analyzed through a survey. Through the analysis of the necessity of SCST introduction, convenience, and effectiveness before and after its application, problems such as problems from the field point of view as well as other factors hindering the introduction of such technology are derived in detail. In addition, an effective combination of technologies for safety management at the current level is determined and an activation plan is presented.

• 한국직업건강간호학회지
• /
• 제23권4호
• /
• pp.277-286
• /
• 2014

Purpose: In this study, I am going to figure out Korean workers' actual exposure to risk factors and percentage of the workers who complain of health problems by performing a comparative analysis of the characteristics of the workers and working conditions in Korea and EU. Methods: The data used in this study includes the $1^{st}$ working conditions survey conducted in 2006 in Korea, the $2^{nd}$ working conditions survey in 2010, the $4^{th}$ EU working conditions survey, and the $5^{th}$ EU working conditions survey. I have compared the changes to Korean working conditions and those to EU working conditions in the categories of demographic characteristics, quality of labor, exposure to risk factors, and health problems included in the data. Results: The analysis of the characteristics of the demographic characters of Korean workers shows that aged and female workers register increased labor force participation. The analysis of labor quality shows that Korea has a long working time but with a lower work intensity compared to the countries included in EU working conditions survey. As for risk factors, Korea registers a low level of exposure as compared to countries included in EU working conditions survey and characteristically shows a decreasing exposure to tobacco smoke. The survey shows sharply increasing complaints of muscle pain in the upper and lower limbs. Conclusion: In this study, I have identified vulnerable social groups by using quantified values in a comparison of the working conditions of Korea and those of EU.

• 대한안전경영과학회지
• /
• 제16권1호
• /
• pp.29-35
• /
• 2014

The purpose of this study is to investigate the problem on safety and health training system in Occupational Safety and Health Act(OSHA) and to find countermeasures to improve it in the construction industry. The questionary survey was done on aiming at tracing the legal drawbacks of safety and health training system. The questionary was prepared to target on site workers, management supervisors, and safety supervisors in various construction sites. After analyzing the answers from the survey, realistic and optimal countermeasures on derived problems were proposed. These should be included on the next revision of OSHA.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.11-18
• /
• 2000

The study on industrial accidents in Korea has been focused on frequencies of each type, severity, characteristics, causes, and so on. Those attributes of industrial accidents were usually analyzed independently, so that it was hard to provide a systematic guidelines for efficient safety management. Therefore, there were a few of studies based on comprehensive survey results in terms of characteristics of safety management. This study aimed to figure out the characteristics of current safety management and to provide a guideline for ideal safety management in industry. The questionnaire survey carried out for the workers(695) who were in charge of safety management at their industries. The multivariate analyses as well as descriptive statistical analysis were conducted. The factor analysis showed that there were three factors of safety management. They were 1) investment and management for accident prevention, 2) safety manager, and 3) general health and environmental condition. The industries of respondents were clustered into three groups. Three groups showed a statistically significant differences on the number of cases reported and the trends of accident. Actually, the group with the larger investment and better management of accident prevention had a smaller number of accident cases.