• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.108-114
• /
• 2017

According to an increase in demand for polyurethane soft foam for thermally insulated containers, the purpose of this study is based on redefining existing rigid polyurethane foam insulation KS standard which has been limited to building material-based authentication techniques. Since there are arising concerns of consumer rights and safety due to humidifier fungicides and urethane track incidents, there are elements to be further researched on rigid polyurethane foam insulation for refregerated containers. Thus, we reviewed the prior standards for rigid polyurethane foam insulation and verified the validity of certification testing method for the new standard with self-foamed polyurethane.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.87-93
• /
• 2014

In this study, the reinforced concrete rahmen bridge damaged by the chloride attack was investigated. According to the investigation, the degraded concretes on cantilever kerb and end part were intensively observed. Thus, the chloride content test and half-cell method were performed to evaluate the degraded parts. As a result, the contents of chloride on degraded parts were C and D grade. On the other hand, the half-cell potential values of rebar in degraded concrete were measured with the minor corrosion. This rebar corrosion is expected to progressing. Chloride content D grade is due to expansion pressure by corrosion of rebar and freeze-thaw by permeate water, could see progresses rapidly degradation. In order to prevent chloride attack to concrete deck caused by deicing salts, corresponding to the chloride critical concentration must maintain grade b or at least grade c. Chloride condition evaluation standard apply to evaluation of marine structure chloride attack with chloride attack by deicing salts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.437-443
• /
• 2014

Electric motors and drives consume the largest amount of electricity more than 40% of global electricity consumption. In addition, motors, drives and its components are included in the global high-trade products and the main driving source for industrial equipment and house appliances. Thus, International standards and regulations for their safety and efficiency are internationally being discussed and created for the protection of its citizens and energy saving. So, understanding the international standards and the regulation of each country is essential to enhance overseas market and to develop product. In this paper, on the basis of this background, status and trends of international standards and regulations are introduced for safety and efficiency of motors and the drives. Safety and efficiency of the IEC (International Electrotechical Commission) standards are introduced in the emphasis. Also, regulations are studied about the differences and trends in each county.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.78-82
• /
• 2010

This study is to test insulation mortar mixed with wastepaper and sawdust to find out its insulation performance. Therefore, wastepaper and sawdust have been added to normal mortar. They are analyzed for the above purpose using compressive strength and insulation performance. It is found that the more wastepaper and sawdust will be mixed, the lower heat conductivity will be taken. Wastepaper and sawdust mixture will be more 2.0% then the insulation mortar quality can be compatible with the 3rd kind of the standard. Optimal mixture for insulation will be wast paper:sawdust=4:6. Cohesive test of materials showed that test material has stronger than stand are $0.10N/mm^2$. It is satisfactory the test result showed a range of $0.12{\sim}0.15N/mm^2$ from the test result. Optimal mixture of wastepaper and sawdust have been found out from the study comprehensively, exclusive of the proportion of wastepaper:sawdust = 8:2. It is thought that standard of length deformation; 0.5% is reasonable. This means that deformation of mortar itself can be considered. But it is also Shown that water mixture has also been sharply changed at first flow test. Therefore, it is thought that absorbed water content in the material gave considerable effect to variation rate.

• Journal of the Korean Society of Safety
• /
• v.25 no.5
• /
• pp.27-32
• /
• 2010

This study is to investigate and compare domestic hazardous toys with harmful substances with foreign toys so that we can find out management criteria for in cognitive infants. Actually, commercially used toys have been collected and tested to find out more effective management standard. it is tried to produce evaluation criteria of environmentally harmful substance but variety of product is needed for overcoming actual barrier due to lot of difficulty huge cost, time, objectiveness. Therefore, This study does not cover all the above. Establishment of evaluation criteria for product harmfulness made by Government or Local government should be continued to improve. Foreign reference material for toy product in Europe, USA, Japan have been investigated and domestic product have been collected and tested for containing heavy metals, formaldehyde, phthalate in the study. All the test have been made in accordance with KSM ISO 2124 to measure heavy metal transfer into body. Toy product used for the study have been purchased in the real market and some of them contains harmful elements with over standard. Post management system such as RAPEX to control periodically should be established for plastic toy with low quality product.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.79-88
• /
• 2017

The purpose of this study is to analyze the effects of personal, job, and health care characteristics of firefighters on musculoskeletal disorders (MSDs) and job stress. This survey was participated 591 firefighters in jeonnam and Busan city. The survey consisted of 1) personal, job, and health care characteristics measurement, 2) job stress measurement (KOSS, Korean Occupational Stress Scale), 3) musculoskeletal disorders symptoms mesurement. The analysis of the data was using SAS 9.1 Ver. The statistics analysis was performed the frequency, percentage, average, and standard deviation for each survey item. The Chi square analysis was performed to analyzed the effects of personal, job, and health care characteristics on MSDs and job stress. According to the results of the study on musculoskeletal disorders symptoms, 49.6% of the subjects perceived pain related to musculoskeletal diseases. The total score for job stress was 51.6 (SD 12.9), which was the highest 50% when compared to the Korean job stress standard (male). Age, department, work experience, working type, position, and sleeping time were found to affect musculoskeletal disorders and job stress.

• The Korean Journal of Malacology
• /
• v.30 no.3
• /
• pp.177-187
• /
• 2014

Mussels have been commonly used in bioassay for quality assessments of environment. Moreover, several standard protocols for the developmental bioassay of bivalves have been proposed. In this study, the EC50 of polycyclic aromatic hydrocarbons (PAHs) was determined using mussel, Mytilus galloprovincialis embryonic developmental bioassay. To determine the sensitivity of M. galloprovincialis, their fertilized eggs were exposed to five PAHs (2-metylnaphthalene, fluorene, dibenzothiophene, phenanthrene, pyrene). The EC50 of 2-metylnaphthalene, fluorene, dibenzothiophene, phenanthrene, and pyrene were 232, 273, 67.9, 43.2, and $33.1{\mu}g/L$, respectively. The overall sensitivity of M. galloprovincialis in the present developmental bioassay was similar to or more sensitive than that of other marine organisms commonly used in aquatic bioassays. The results of this study could be provide with fundamental data of setting standard for protection of marine life and or can use prediction the aquatic toxicity of PAHs.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.16-18
• /
• 2011

This study aims to identify the degree of safety when mariners take their actions in several different situations. We have carried out many experiments in order to observe mariners' behavior, and then measured the safety level that is based on their actions to avoid dangerous collision situations. One of the most important actions that mariners have to take, either as their daily routine or when they are in a collision situation and then want to avoid that situation is the lookout. In this paper, behaviors on the lookout have been defined as a standard sequence of three steps that are "time of first detection", "time of recognition as risky vessel" and "time of starting avoiding action", and the suitability and applicability of the definition have been shown. And also we propose the risk assessment on the collision and the recommendation for reducing the collision at sea. Some analyzing results and the application of the results are reported. The sequence of lookout is also understood. By combining these knowledge and some systematic studies, we propose the risk assessment on the collision and the recommendation for reducing the collision at sea.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.5
• /
• pp.13-18
• /
• 2015

This study has been performed to evaluate the safety of the retainer-type ball valve for a high-pressure pipeline to a district heating plant. The retainer-type ball valve is an improved design for conventional ball valves, such as the floating ball valve and the trunnion ball valve. Numerical analysis of the valve design verification has been applied to investigate the safety factor and seat leakage of the DN300 and DN400 sizes. The given condition to solve the structural analysis was based on the international standard for ISO 5208. In this study, the methods for structural analysis are described in detail. The structural analysis results present the deformations, the equivalent stresses, and the safety factors. Through these results, this study successfully demonstrates the safety and seat leakage of the retainer-type ball valve. They also streamline the process of development for valve manufacturing.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1633-1638
• /
• 2003

In case that in-leakage through the valve disk occurs, a numerical study is performed to estimate on thermal stratification phenomenon in the Safety Injection piping connected with the Reactor Coolant System piping of Nuclear Power Plant. As the leakage flow rate increases, the temperature difference between top and bottom of horizontal piping has the inflection point. In the connection point of valve and piping, the maximum temperature difference between top and bottom was 185K and occurred in the condition of 10 times of standard leakage flow rate. In the connection point of elbow and horizontal piping, the maximum temperature difference was 145K and occurred in the condition of 15 times of standard leakage flow rate. In the vertical piping of Safety Injection piping, the near of connection point between elbow and vertical piping showed the outstanding thermal stratification phenomenon in comparison with another region because of turbulent penetration from Reactor Coolant System piping. In order to prevent damage of piping due to the thermal stratification when in-leakage through the valve disk occurs, the connection points between valve and piping, and the connection points between elbow and piping need to be inspected continually.