References
- Kim, D. S., Bea, S. K., Lee, W. H. and Kim, H. S., 2006, "Thermal Stress and Flow Analysis of a Cryogenic Ball Valve," Journal of Drive and Control, Vol. 3, No. 4, pp. 8-13.
- Jeon, H. P., Kim, D. Y. and Lee, J. C., 2014, "CFD Analysis on the Flow Characteristics with Flow Coefficient in a PFA Lined Ball Valve for Different Opening Degrees," The KSFM Journal of Fluid Machinery, Vol. 17, No. 4, pp. 76-80. https://doi.org/10.5293/kfma.2014.17.4.076
- Moujaes, S. F. and Jagan, R., 2008, "3D CFD Predicteions and Experimental Comparisons of Pressure Drop in a Ball Valve at Different Partial Openings in Turbulent Flow," Journal of Energy Engineering-ASCE, Vol. 134, No. 1, pp. 24-28. https://doi.org/10.1061/(ASCE)0733-9402(2008)134:1(24)
- Chern, M. J., Wang, C. C. and Ma, C. H., 2007, "Performance test and flow visualization of ball valve," Experimental Thermal and Fluid Science, Vol. 31, pp. 505-512. https://doi.org/10.1016/j.expthermflusci.2006.04.019
- Song, X. G., Kim, S. G., Baek, S. H. and Park, Y. C., 2009, "Structural optimization for ball valve made of CF8M stainless steel," Transactions of Nonferrous Metals Society of China, Vol. 19, pp. s258-s261. https://doi.org/10.1016/S1003-6326(10)60280-4
- Bagheriard, S., Pariente, I. F. and Guagliano, M., 2013, "Failure analysis of a large ball valve for pipe-lines," Egineering Failure Analysis, Vol. 32, pp. 167-177. https://doi.org/10.1016/j.engfailanal.2013.03.012
- Rogula, J., 2012, "The Influence of Seat Fatigue Test on the Leakage in Ball Valve," Procedia Engineering, Vol. 39, pp. 91-97. https://doi.org/10.1016/j.proeng.2012.07.012
- Shin, M. S., Yoon, J. Y., Park, I. W., Lee, S. H., Park, H. Y. and Jung, S. H., 2010, "A Study on Structural Analysis of Butterfly Valve Components by Pressure Testing of the Industrial Standard," The KSFM Journal of Fluid Machinery, Vol. 14, No. 3, pp. 5-9.
- ISO 5208, 2008, "Industrial valves-Pressure testing of metallic valves," International Organization for Standardization, Geneva, Switzerland.
- IEC 60534-4, 2006, "Industrial-process control valves, Part 4: Inspection and routine testing," International Electrotechnical Commission, Geneva, Switzerland.
- KS B 2304, 2001, "General rules for inspection of valves," Korean Standard Association.
- ANSYS User's Manual version 14.0, ANSYS Inc., USA.
- SolidWorks 2012 User's Manual, Dassault systems solidworks corporation., USA.
Cited by
- A microwave SIW sensor loaded with CSRR for wireless pressure detection in high-temperature environments vol.53, pp.8, 2020, https://doi.org/10.1088/1361-6463/ab58f2
- 수소 충전소용 초고압 볼밸브 설계에 관한 연구 vol.18, pp.3, 2015, https://doi.org/10.7839/ksfc.2021.18.3.023