• 한국컴퓨터정보학회논문지
• /
• 제28권11호
• /
• pp.235-243
• /
• 2023

본 논문에서는 피지컬 컴퓨팅를 활용한 문제해결 기반 안전교육 프로그램을 개발하고 이를 적용하여 중학생의 자기효능감과 흥미에 미치는 영향을 검증하였다. 구체적으로 본 연구에서 개발한 안전교육 프로그램은 창의적 문제해결 모형의 4단계인 문제 확인, 계획, 실행 및 평가의 단계와 피지컬 컴퓨팅 도구인 아두이노를 활용한 학습 활동을 포함한다. 중학교 3학년 77명을 대상으로 피지컬 컴퓨팅를 활용한 문제해결 기반 안전교육 프로그램을 실행한 결과 중학생의 자기효능감과 흥미 모두가 프로그램 참여 후에 유의미하게 상승하였다. 연구 결과를 토대로 피지컬 컴퓨팅과 문제해결 단계를 적용한 교육 프로그램의 효과성을 확인하고 학교 현장에서 피지컬 컴퓨팅 교육의 활성화 촉진을 위한 실천적 시사점을 제시하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.578-579
• /
• 2005

• 한국안전학회지
• /
• 제18권1호
• /
• pp.94-100
• /
• 2003

Generally, cable-stayed bridges are both statically indeterminate structure with a high degree of redundancy and flexible structure. So it is very important to ensure precision control during both fabrication and construction. In precision control of cable-stayed bridges, precision control under multi-objective programming method is needed, because precision control problem of cable-stayed bridges is a multi-objective programming problem in which many objective functions are regard as variables. In previous studies, it was regarded as a single-objective problem, so it had many problems in respect of usefulness and rationalness. In this study, precision control under multi-objective programming method is proposed considering economy, efficiency, and safety at best in precision control of cable-stayed bridges. Precision control problem of cable-stayed bridges is formulated with satisfying trade-off method which is a kind of multi-objective programming method, then it is optimized with min-max method. A computer program is presented including above process.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.23-33
• /
• 2000

This paper is concerned with finding the global optimal solutions for the redundancy optimization problems in series-parallel systems related with system safety. This study transforms the difficult problem, which is classified as a nonlinear integer problem, into a 0/1 IP(Integer Programming) by using binary integer variables. And the global optimal solution to this problem can be easily obtained by applying GAMS (General Algebraic Modeling System) to the transformed 0/1 IP. From computational results, we notice that GA(Genetic Algorithm) to this problem, which is, to our knowledge, known as a best algorithm, is poor in many cases.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.122-128
• /
• 1997

A new approach, called "two-phase approach", has been proposed In this study. Using this approach to solve MONLP(multiobjective nonlinear programming problem), the solution process is divied into two phase. In the first phase, the min-operator is used to aggregate the membership degree of fuzzy goals and constraints. In the second phase, the $\gamma$-operator is used to test and find an efficient solution in the sense of nondominated. It has been shown that no matter what the solution of the problem is unique or not, an efficient solution can be always obtained at the second phase. The proposed approach can be applied to industrial safety problem with multiobjective problems. On the basis of proposed approach, an illustrative numerical example is presented.presented.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.141-154
• /
• 2004

The objective of this paper is to develop the efficient heuristic method for solving the minimum makespan problem of the job shop scheduling. The proposed heuristic method is based on a constraint satisfaction problem technique and a improved randomizing search algorithm. In this paper, ILOG programming libraries are used to embody the job shop model, and a constraint satisfaction problem technique is developed for this model to generate the initial solution. Then, a improved randomizing search algorithm is employed to overcome the increased search time of constrained satisfaction problem technique on the increased problem size and to find a improved solution. Computational experiments on well known MT and LA problem instances show that this approach yields better results than the other procedures.

• 대한가정학회지
• /
• 제36권3호
• /
• pp.1-14
• /
• 1998

This research focuses the safety problems for consumers with the viewpoint of behaviorism. Specially three issues are addressed: 1) Variables influencing the consumer's safety consciousness 2) The comparision of consumer's safety seeking behavior according to the product type 3) The relation of variables influencing the consumer's safety-seeking behaviors. In this paper, I deal with mainly the gas products and agricultural products and then observe the consumers' reaction for those two products concerning to the consumer's safety problem. For this purpose, I distributed the questionnaire to the residents I Seoul and suburban area of age between 20 and 60 years old. As a result, consumers put high values and concerns on general safety, but have quite negative concepts on society's safety problems generally. It was found that the consciousness on this problem was higher among those people who were reading journals for consumers, who have high education or high incomes, or who were unemployed house wives. In gas products, the level of consumer's safety seeking behavior and subareas were higher than in agricultural products. In the matter of the variables which affect the consumer's safety seeking behavior directly, those were safety consciousness variables and experience of reading journal for consumer in gas products, and safety consciousness vatiabls, consumer education experience, experience of injury, being employed and being married in agricultural products. Also as the result of path analysis, experience of reading journal for consumer, being employed, education and income level influenced indirectly the consumer safety seeking behavior.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.99-103
• /
• 2014

Recently unemployed construction workers are increasing because of construction recession. But the lack of manpower occurs at the same time, in construction sites. So, the excess of workforce supply and demand exists in construction sites. Construction companies have a difficulty in seeking young skilled workers due to this problem. In this study, construction accidents reported by Korean Occupational Safety and Health Agency from 2007 to 2010 were analyzed. It has shown that 50-54, 45-49 and 55-59 year old workers formed 22%, 18% and 17% respectively. This means that old workers becomes a real problem in construction. This research has shown that old workers didn't have much more accidents than young workers, construction accidents related to the employment period of workers.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.27-31
• /
• 2010

It is a well known fact that the LCD and Semiconductor Devices are a central part of IT industry which is important in the present and the future. But the biggest problem of Semiconductor and LCD manufacturing is maintaining a cleaning room environment. For this reason, the soft X-ray type Ionizer was used as the electrostatic reducer device, which protects damage of the product against electrostatic discharge in the manufacturing process. Therefore it is a essential important factor during Semiconductor and LCD production process. But the soft X-ray has a intrinsic problem with harmful to human being in case of soft X-ray exposure. That's reason we have the research to solve above problem and made an apparatus that it was covered with shielding structure to protect X-ray radiation to outside. And besides, it has a possibility to eliminate the charged electrostatic in the narrow space through the slot for Ion emissions with dual soft X-ray sources on the both side. It is also not make the particles from itself when it has been operated.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.43-53
• /
• 2008

This study is carried out for the fire safety of the factory building, the fire risk reduction measure in compliance with an example approached in fire risk reduction systematically, contribute to reduce the fire risk. The analytical fire risk process of discovering, identifying, estimating and evaluating risk and control measure as risk reduction measures are core concept, applies loss prevention with loss control techniques. The painting process in the workplace where the fire hazard and death accident accompanies coexists. Loss prevention problem of creation prevention of dangerous atmosphere at workplace is health and human services problem of normal circumstances, must be inspected with problem of combustible gases at the time of fire explosion. Static electricity measure accomplished the risk control process thoroughly as the fire risk reduction process model with the ignition sources measure which is presented. Fire risk from within organizing will be able to classify with each field by detailedly but risk treatment process will be able to apply basically all the same concept. Consequently about risk management example from before, this study is proposed risk management techniques that standardized rightly in the actual condition of organization with one plan, with discovery of fire risk, the feedback process in compliance with a fire risk reduction and the review which control the result is joint responsibility of engineer, technical expert and manager as part of safety management to practice with the fact must be supervised.