• 한국항공우주학회지
• /
• 제46권2호
• /
• pp.133-140
• /
• 2018

본 논문에서는 복합재 적층 구조물의 면내 구조 해석을 위한 자동화 소프트웨어를 개발한다. 개발된 소프트웨어는 다양한 파손 기준을 제공하며 사용자의 편리성을 고려하여 해석 결과를 출력한다. 또한 병렬처리 기법에 기반한 일괄 처리 해석(batch job analysis) 기능을 지원한다. 구현된 소프트웨어의 성능을 검증하기 위하여 소프트웨어에서 계산된 안전 여유와 자체적으로 사용 중인 in-house 방식과 실제 시편 실험에서 얻어진 안전 여유간의 비교를 수행하였다. 비교 결과 in-house 방식과는 0.01 이하의 오차가 있었으며 시편 실험과는 약 ${\pm}10%$ 이내의 오차가 존재함을 확인하였다. 또한 병렬처리 기법을 적용한 일괄 처리 해석 작업의 실행 속도 개선을 확인하였다.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.447-451
• /
• 2015

본 연구의 목적은 유한요소 해석을 이용하여 항공기 엔진에 장착된 미세 튜브형 열교환기의 작동하중에 대한 특성을 파악하고 구조안전성을 평가하는 것이다. 작동 하중은 열-기계하중이 고려되었다. 항공기 엔진 부품의 특수성으로 인하여 구조적 강성확보뿐만 아니라 고효율, 저중량, 최소체적을 만족하는 형상 설계가 요구 된다. 브레이징한 미세튜브의 기계적물성치 확보를 위해 고온 인장 실험을 수행하였다. Ansys 12.1의 자체 모델러를 이용하여 형상을 모델링하고 유한요소해석을 수행하였다. 열-구조 연성해석을 통하여 튜브를 제외한 모듈형(modular type) 열교환기에 대한 설계방법을 제시하고 구조적 건전성을 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.46-48
• /
• 2005

This paper discusses a probabilistic method for power system security assessment. The security analysis relates to the ability of the electric power systems to survive sudden disturbances such as electric short circuits or unanticipated loss of system elements. It consists of both steady state and dynamic security analyses, which are not two separate issues but should be considered together. In steady state security analysis including voltage security analysis, the analysis checks that the system is operated within security limits by OPF (optimal power flow) after the transition to a new operating point. Until now, many utilities have difficulty in including dynamic aspects due to computational capabilities. On the other hand. dynamic security analysis is required to ensure that the transition may lead to an acceptable operating condition. Transient stability, which is the ability of power systems to maintain synchronism when subjected to a large disturbance. is a principal component in dynamic security analysis. Usually any loss of synchronism may cause additional outages and make the present steady state analysis of the post-contingency condition inadequate for unstable cases. This is the reason for the need of dynamic studies in power systems. Probabilistic criterion can be used to recognize the probabilistic nature of system components while considering system security. In this approach. we do not have to assign any predetermined margin of safety. A comprehensive conceptual framework for probabilistic static and dynamic assessment is presented in this paper. The simulation results of the Western System Coordinating Council (WSCC) system compare an analytical method with Monte-Carlo simulation (MCS).

• 항공우주시스템공학회지
• /
• 제12권4호
• /
• pp.26-34
• /
• 2018

이륙 중량 25 kg급 멀티콥터용으로 개발된 프로펠러에 대해 정적 구조 시험 및 성능 시험을 통해 설계 요구도 충족 여부를 판별하기 위한 시험 평가를 수행하였다. 정적 구조 시험에서는 극한 하중 및 요구도 하중 부가 후 시편 파손이 발생하지 않음으로써 프로펠러 구조 강도에 대한 안전 여유 3 이상을 갖는 것으로 나타났다. 성능 시험에서는 설계 요구도의 제자리 비행 추력 및 최대 추력을 발생시키고, 운용 추력 영역에서 제자리 비행 성능 효율은 0.73 이상을 나타내었다. 기준 프로펠러와 비교할 때, 성능 효율 최대값은 3% 이상 증가되고, 소비 전력은 운용 영역에서 4% 이상 저감되는 것으로 나타났다. 구조 강도 요구도 및 성능 요구도를 충족시킴으로써 프로펠러는 성공적으로 개발된 것으로 평가되었다.

• Journal of Gastric Cancer
• /
• 제1권1호
• /
• pp.44-49
• /
• 2001

Purpose: Quality of life (QOL) assessment should be applied in surgical settings to compare treatment options. We compared QOL after a subtotal versus a total gastrectomy for gastric cancer to identify which resection would produce a better QOL for the patient. Patients and Methods: We studied 362 patients with no evidence of recurrent disease after curative surgery for gastric cancer. The QOL was measured by assessing patient health perceptions according to the Spitzer index and Troidl score and by treatment-specific symptoms according to Korenaga and others with some modifications. High scores reflect a better QOL. Results: The mean score of the Spitzer index was $8.87\pm1.36$ after a subtotal gastrectomy and $8.80\pm1.23$ after a total gastrectomy. More than $80\%$ of the patients in both groups maintained good quality of life when measured by the Spitzer index. The mean Troidl score was $10.41\pm2.12$ after a subtotal gastrectomy and $9.79\pm2.16$ after a total gastrectomy (p=0.033). Swallowing difficulty was more frequent after a total gastrectomy (p=0.002). There was a statistically significant difference in the meal size (p=0.044). Other variables of the Troidl score revealed no statistically significant differences. Dizziness was significantly more frequent after a total gastrectomy than after a subtotal gastrec tomy (p=0.009). Conclusion: We conclude that in terms of postoperative quality of life, a subtotal gastrectomy has advantages over a total gastrectomy. In those cases where an adequate proximal safety margin can be achieved by a subtotal gastrectomy, that procedure is preferable to a total gastrectomy.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권6호
• /
• pp.340-346
• /
• 2002

The purpose of the present study was to examine the efficacy and mechanism of the PAB (para-amino benzamidine) affinity column chromatography, Viresolve NFP virus filtration, pasteurization (60$\^{C}$ heat treatment for 10 h), and lyophilization steps employed in the manufacture of urokinase from human urine as regards the removal and/or inactivation of the hepatitis A virus (HAV). Samples from the relevant stages of the production process were spiked with HAV and subjected to scale-down processes mimicking the manufacture of urokinase Samples were collected at each step, immediately titrated using a 50% tissue culture infectious dose (TCID$\_$50/), and the virus reduction factors evaluated. PAB chromatography was found to be an effective step for removing HAV with a log reduction factor of 3.24. HAV infectivity was rarely detected in the urokinase fraction, while most of the HAV infectivity was recovered in the unbound and wash fractions. HAV was completely removed during the Viresolve NFP filtration with a log reduction factor of $\geq$ 4.60. Pasteurization was also found to be an effective step in inactivating HAV where the titers were reduced from an initial titer of 7.18 log$\_$10/ TCID$\_$50/ to undetectable levels within 10 h of treatment. The log reduction factor achieved during pasteurization was $\geq$ 4.76. Lyophilization revealed the lowest efficacy for inactivating HAV with a log reduction factor of 1.48. The cumulative log reduction factor was $\geq$ 14.08. Accordingly, these results indicate that the production process for urokinase exhibited a sufficient HAV reducing capacity to achieve a high margin of virus safety.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.301-306
• /
• 2016

추진축계 횡진동은 축계배치계산과 함께 설계단계에서 충분한 검토가 이루어져야 한다. 축계 강제 횡진동 문제는 아직 명쾌한 해석방법이 제시되지 못하고 있으며 선급, 국제규격 등에서 대략적으로 프로펠러 날개차수 고유 진동수가 엔진정격회전수의 ${\pm}20%$이내에 들지 못하게 하고 있다. 축계배치관점에서는 축계 지지베어링 중심간 사이의 거리가 멀수록 좋으나 횡진동관점에서는 파장이 길어지고 고유진동수는 낮아져 공진이 발생할 수 있는 요인이 되어 검토시 주의가 요구되므로 계산결과를 실측으로 검증하는 것이 바람직하다. 본 연구에서는 최근 친환경 고효율 선박으로 등장한 5만 DWT급 석유화학제품운반선을 대상으로 횡진동 이론적 분석 및 스트레인 게이지 계측자료 분석을 수행하고 이를 통해 횡진동이 추진축계에 미치는 영향을 검토하였다.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.313-320
• /
• 2015

A 2-axis gimbal-type X-band antenna has been widely used to effectively transmit the high resolution image data from the observation satellite to the desired ground station. However, a discontinuous stepper motor activation for rotating the pointing mechanism in azimuth and elevation directions induces undesirable micro-vibration disturbances which can result in the image quality degradation of a high-resolution observation satellite. To enhance the image quality of the observation satellite, attenuating the micro-vibration induced by an activation of the stepper motor for rotational movements of the antenna is important task. In this study, we proposed a low-rotational-stiffness blade gear applied to the output shaft of the stepper motor to obtain the micro-vibration isolation performance. The design of the blade gear was performed through the structure analysis such that this gear is satisfied with the margin of safety rule under the derived torque budget. In addition, the micro-vibration isolation performance of the blade gear was verified through the micro-vibration measurement test using the dedicated micro-vibration measurement device proposed in this study.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.211-231
• /
• 2014

Prestressed hollow-core slabs (HCS) are widely used for modern lightweight precast floor structures because they are cost-efficient by reducing materials, and have excellent flexural strength and stiffness by using prestressing tendons, compared to reinforced concrete (RC) floor system. According to the recently revised ACI318-08, the web-shear capacity of HCS members exceeding 315 mm in depth without the minimum shear reinforcement should be reduced by half. It is, however, difficult to provide shear reinforcement in HCS members produced by the extrusion method due to their unique concrete casting methods, and thus, their shear design is significantly affected by the minimum shear reinforcement provision in ACI318-08. In this study, a large number of shear test data on HCS members has been collected and analyzed to examine their web-shear capacity with consideration on the minimum shear reinforcement requirement in ACI318-08. The analysis results indicates that the minimum shear reinforcement requirement for deep HCS members are too severe, and that the web-shear strength equation in ACI318-08 does not provide good estimation of shear strengths for HCS members. Thus, in this paper, a rational web-shear strength equation for HCS members was derived in a simple manner, which provides a consistent margin of safety on shear strength for the HCS members up to 500 mm deep. More shear test data would be required to apply the proposed shear strength equation for the HCS members over 500 mm in depth though.

• Earthquakes and Structures
• /
• 제18권5호
• /
• pp.649-665
• /
• 2020

One of the most important issues in structural systems is evaluation of the margin of safety in low and mid-rise buildings against the progressive collapse mechanism due to the earthquake loads. In this paper, modeling of collapse propagation in structural elements of RC frame buildings is evaluated by tracing down the collapse points in beam and column structural elements, one after another, under earthquake loads and the influence of column removal is investigated on how the collapse expansion in beam and column structural members. For this reason, progressive collapse phenomenon is studied in 3-story and 5-story intermediate moment resisting frame buildings due to the corner and edge column removal in presence of the earthquake loads. In this way, distribution and propagation of the collapse in progressive collapse mechanism is studied, from the first element of the structure to the collapse of a large part of the building with investigating and comparing the results of nonlinear time history analyses (NLTHA) in presence of two-component accelograms proposed by FEMA_P695. Evaluation of the results, including the statistical survey of the number and sequence of the collapsed points in process of the collapse distribution in structural system, show that the progressive collapse distribution are special and similar in low-rise and mid-rise RC buildings due to the simultaneous effects of the column removal and the earthquake loads and various patterns of the progressive collapse distribution are proposed and presented to predict the collapse propagation in structural elements of similar buildings. So, the results of collapse distribution patterns and comparing the values of collapse can be utilized to provide practical methods in codes and guidelines to enhance the structural resistance against the progressive collapse mechanism and eventually, the value of damage can be controlled and minimized in similar buildings.