• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제44권1호
• /
• pp.60-70
• /
• 2021

Recently, with the development of technologies for the fourth industrial revolution, convergence and complex technology are being applied to aircraft, electronic home appliances and mobile devices, and the number of parts used is increasing. Increasing the number of parts and the application of convergence technologies such as HW (hardware) and SW (software) are increasing the No Defect Found (NDF) phenomenon in which the defect is not reproduced or the cause of the defect cannot be identified in the subsequent investigation systems after the discovery of the defect in the product. The NDF phenomenon is a major problem when dealing with complex technical systems, and its consequences may be manifested in decreased safety and dependability and increased life cycle costs. Until now, NDF-related prior studies have been mainly focused on the NDF cost estimation, the cause and impact analysis of NDF in qualitative terms. And there have been no specific methodologies or examples of a working-level perspective to reduce NDF. The purpose of this study is to present a practical methodology for reducing NDF phenomena through data mining methods using quantitative data accumulated in the enterprise. In this study, we performed a cluster analysis using market defects and design-related variables of mobile devices. And then, by analyzing the characteristics of groups with high NDF ratios, we presented improvement directions in terms of design and after service policies. This is significant in solving NDF problems from a practical perspective in the company.

• Korean Journal of Clinical Pharmacy
• /
• 제31권4호
• /
• pp.311-323
• /
• 2021

Objective: The disabled are in a blind spot for obtaining information on drugs, and the pharmacies' counseling on drug use is centered on non-disabled people. Few studies have investigated the current statuses of drug use by type of disability. The purpose of this study is to understand the drug use by type of disability and by life cycle of visually impaired and hearing impaired in Korea. Methods: The study participants consisted of 16 people with visually impairments, 12 people with hearing impairments. One in-depth interview was conducted per participant, and each interview was recorded and documented. Results: Common barriers against safe medication and medical service uses across disability types are 'lack of consideration and service for the disabled, limited access to medical facilities due to disability, limited access to information regarding medication use, psychological anxiety about drug use and side effects, and inconvenience regarding COVID-19 epidemic. The specific factors were 'difficulties in identifying proper medicines and following prescribed dosages' in the case of visually impaired, and 'problems with sign language interpretation system' for the hearing impaired. Conclusion: Disabled people are hindered from using medicines properly due to various factors. Based on the content derived from this study, it is necessary to eliminate the inhibition factors and devise specific measures for the safety of each type of disorder such as developing a method for medication counseling considering disabilities and establishing communication support systems.

• Journal of the Korea Institute of Building Construction
• /
• 제22권2호
• /
• pp.171-182
• /
• 2022

The regular assessment of a building is important to understand structural safety and latent risk in the early stages of building life cycle. However, methods of traditional assessment are subjective, atypical, labor-intensive, and time-consuming and as such the reliability of these results has been questioned. This study proposed a method to bring accurate results using a 3D laser scanner and integrate them in Building Information Modeling (BIM) to visualize defective condition. The specific process for this study was as follows: (1) semi-automated data acquisition using 3D laser scanner and python script, (2) scan-to-BIM process, (3) integrating and visualizing defective conditions data using dynamo. The method proposed in this study improved efficiency and productivity in a building assessment through omitting the additional process of measurement and documentation. The visualized 3D model allows building facility managers to make more effective decisions. Ultimately, this is expected to improve the efficiency of building maintenance works.

• Korean Journal of Construction Engineering and Management
• /
• 제24권3호
• /
• pp.31-41
• /
• 2023

This study is a study to develop a configuration management methodology for efficient and systematic management in the event of configuration changes such as deformation, explosion, and remodeling of launch vehicle development test facilities, which are emerging as important national facilities in the era of full-scale space competition. Through the analysis of international standards for configuration management, a configuration management process framework to be applied to launch vehicle development test facilities is extracted, a survey was conducted on experts who performed life cycle engineering of launch vehicle development test facilities, and a configuration management methodology optimized for operation/management of domestic launch vehicle development test facilities was proposed. Identify the configuration for launch vehicle development test facilities, the configuration management manager, configuration management organization, and configuration management board approve/process the configuration changes, and after construction is completed according to design requirements, launch vehicle development test facilities try to manage the configuration in a controlled state.

• The Journal of Health Technology Assessment
• /
• 제1권1호
• /
• pp.22-26
• /
• 2013

Objectives: Balancing benefits and risks through the drug life cycle has been discussed for many decades. The objective of this study was to review the processes and tools currently proposed for benefit-risk assessment of medicinal drugs. It aimed to establish scientific and efficient drug safety management system based on the synthetic analysis of benefit-risk evidence. Methods: We conducted a review of exiting literatures published by regulatory agencies or initiatives. Not only quantitative methodologies but also qualitative method were compared to understand their key characteristics for the benefit and risk assessment of drugs. Results: Recently, benefit-risk assessments have more structured approaches to decision making as part of regulatory science. Regulatory agencies such as European Medicines Agency, FDA have prepared plans to apply benefit-risk assessment to regulatory decision making. Also many initiatives such as IMI (Innovative Medicine Initiative) have conducted research and published reports about benefit-risk assessment. For benefit-risk assessment, four kinds of methods are necessary. Frameworks such as BRAT (Benefit Risk Action Team) framework, PrOACT-URL provide guidance for the whole process of decision-making. Metrics are measurements of risk benefit. The estimation techniques are methods to synthesis and combine evidences from various sources. The utility survey techniques are necessary to explicit preferences of various outcome from stakeholders. Conclusion: There is the lack of widely accepted, validated model for benefit-risk assessment. Nor there is an agreement among academia, industry, and government on methods for the quantitative valuation. It is also limited by available evidence and underlying assumptions. Nevertheless, benefit-risk assessment is fundamental to improve transparency, consistency and predictability for decision making through the structured systematic approaches.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제44권1호
• /
• pp.117-124
• /
• 2024

The objective of Value Engineering (VE) is to derive the optimal value at the most efficient life cycle cost, comprising three stages: Pre-Study, Study, and Post-Study. In this study, we propose a method for information collection and analysis during planned site visit surveys in the preparation stage of VE. The 3D spatial model, created using a drone, facilitated observation and analysis of the study area from various angles, both from the center and the outside. Additionally, through the utilization of drones, we conducted on-site investigations of the research area's 3D spatial model, enabling a macroscopic perspective previously only feasible through a microscopic viewpoint during planned site visits in the pre-study phase. Furthermore, the utilization of actual spatial data obtained from observations allowed for real-time information verification during Design VE workshops, enhancing the efficiency and reliability of the VE project.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제30권5호
• /
• pp.909-928
• /
• 2020

From the early 1970s, the US government began to recognize that penetration testing could not assure the security quality of products. Results of penetration testing such as identified vulnerabilities and faults can be varied depending on the capabilities of the team. In other words none of penetration team can assure that "vulnerabilities are not found" is not equal to "product does not have any vulnerabilities". So the U.S. government realized that in order to improve the security quality of products, the development process itself should be managed systematically and strictly. Therefore, the US government began to publish various standards related to the development methodology and evaluation procurement system embedding "security-by-design" concept from the 1980s. Security-by-design means reducing product's complexity by considering security from the initial phase of development lifecycle such as the product requirements analysis and design phase to achieve trustworthiness of product ultimately. Since then, the security-by-design concept has been spread to the private sector since 2002 in the name of Secure SDLC by Microsoft and IBM, and is currently being used in various fields such as automotive and advanced weapon systems. However, the problem is that it is not easy to implement in the actual field because the standard or guidelines related to Secure SDLC contain only abstract and declarative contents. Therefore, in this paper, we present the new framework in order to specify the level of Secure SDLC desired by enterprises. Our proposed CIA (functional Correctness, safety Integrity, security Assurance)-level-based security-by-design framework combines the evidence-based security approach with the existing Secure SDLC. Using our methodology, first we can quantitatively show gap of Secure SDLC process level between competitor and the company. Second, it is very useful when you want to build Secure SDLC in the actual field because you can easily derive detailed activities and documents to build the desired level of Secure SDLC.

• Journal of Korean Society of Transportation
• /
• 제33권3호
• /
• pp.237-246
• /
• 2015

Operation and Maintenance in road infrastructure is repetitive carbon emissions activities to preserve the road in its originally constructed condition. In the view of road planning and construction, operation, and maintenance of life cycle, operation and maintenance stage quantification of carbon emissions is very important because it is easily accessible activities to reduce carbon emissions in road infrastructure that existing and new road. However, carbon emissions estimation in operation and maintenance stage is yet to do, because data collection is so hard and carbon emissions estimation methodology is very complicated. In this study, a basic unit of carbon emission in the operation and maintenance stage of the road infrastructure was developed in order to get the quantitative determination of carbon that occurring. Carbon emissions of the Expressway and Common state road was calculated by using the basic unit of carbon emission and application plan of basic unit of carbon emission are presented.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제13권2호
• /
• pp.163-169
• /
• 2015

In many nuclear power plant sites in Korea, high density storage racks were installed in the spent fuel pool to expand the spent fuel storage capacity. Nevertheless, the capability of the Hanbit nuclear site will be saturated by 2024. Also, 10 NPPs will reach their design life expiration date by 2029. In the case of the US, SFPI (Spent Fuel Pool Island) operated temporarily as a spent fuel storage option before spent nuclear fuels were transported to an interim storage facility or a final disposal facility. As a spent fuel storage option after shutdown during decommissioning, the SFPI concept can be expected to have the following effects: reduced occupational exposure, lower cost of operation, strengthened safety, and so on. This paper presents a case study associated with the regulations, operating experiences, and systems of SFPI in the US. In conclusion, the following steps are recommended for applying SFPI during decommissioning in Korea: confirmation of design change scope of SFPI and expected final cost, the submission of a decommissioning plan which is reflected in SFPI improvement plans, safety assessment using PSR, application of an operating license change for design change, regulatory body review and approval, design change, inspection by the regulatory body, education and commissioning for SFPI, SFPI operation and periodic inspection, and dismantling of SFPI.

• Journal of the Korean Electrochemical Society
• /
• 제4권4호
• /
• pp.152-159
• /
• 2001

Electric vehicle performance is very dependent on traction batteries. For developing the electric vehicles with high performance and good reliability, the traction batteries have to be managed to get maximum performance under various operating conditions. The enhancement of the battery performance can be accomplished by implementing battery management system (BMS) that plays important roles of optimizing the control mechanism of charge and discharge of the batteries as well as monitoring battery status. In this study the battery management system has been developed for maximizing the use of Ni/MH batteries in electric vehicle. This system provides several tasks: the control of charging and discharging, overcharge and over-discharge protection, the calculation and display of state of charge, safety and thermal management. The BMS was installed in and tested using the DEV5-5 electric vehicle developed by Daewoo Motor Co. and Institute for Advanced Engineering in Korea. The 18 modules of Panasonic Ni/MH battery, 12 V-95 Ah, were used in the DEV5-5. The high accuracy within the range of $3\%$ and the good reliability were shown in the test results. The BMS can also improve the performance and cycle life of Ni/MH battery pack as well as the reliability and safety of the electric vehicles (EV).