DOI QR코드

DOI QR Code

Development of Configuration Management Methodology for Rocket Development Test Facilities

발사체 개발 시험시설의 형상관리 방법론 개발

  • Jeon, Chanmin (Facilities Safety Technology Division, Korea Aerospace Research Institute ) ;
  • Choi, Minchan (Research Department of Housing Welfare, Land and Housing Research Institute) ;
  • Park, Taekeun (Department of Architecture, Mokwon University)
  • 전찬민 (한국항공우주연구원 시설안전기술부) ;
  • 최민찬 (토지주택연구원 주거복지연구실 ) ;
  • 박태근 (목원대학교 건축학과 )
  • Received : 2023.02.28
  • Accepted : 2023.05.23
  • Published : 2023.05.31

Abstract

This study is a study to develop a configuration management methodology for efficient and systematic management in the event of configuration changes such as deformation, explosion, and remodeling of launch vehicle development test facilities, which are emerging as important national facilities in the era of full-scale space competition. Through the analysis of international standards for configuration management, a configuration management process framework to be applied to launch vehicle development test facilities is extracted, a survey was conducted on experts who performed life cycle engineering of launch vehicle development test facilities, and a configuration management methodology optimized for operation/management of domestic launch vehicle development test facilities was proposed. Identify the configuration for launch vehicle development test facilities, the configuration management manager, configuration management organization, and configuration management board approve/process the configuration changes, and after construction is completed according to design requirements, launch vehicle development test facilities try to manage the configuration in a controlled state.

본 연구는 본격적인 우주 경쟁 시대에 중요 국가시설로 부각되고 있는 발사체 개발 시험시설의 변형, 폭발, 개조 등 형상변경 발생 시 효율적이고 체계적인 관리를 위한 형상관리 방법론을 개발하기 위한 연구이다. 형상관리 국제기준 분석을 통해 발사체 개발 시험시설에 적용할 형상관리 프로세스 프레임워크를 추출하고, 발사체 개발 시험시설의 라이프 사이클 엔지니어링을 수행한 전문가를 대상으로 설문조사를 실시하여 국내 발사체 개발 시험시설의 운영·관리에 최적화된 형상관리 방법론을 제안하였다. 발사체 개발 시험시설에 대해 형상을 식별하고, 설계 요구조건에 의해 구축이 완료된 상태 이후에는 형상관리 담당, 형상관리 조직, 형상관리위원회를 통해 형상변경 사항에 대해 승인, 처리함으로써 발사체 개발 시험시설의 형상을 통제된 상태로 관리하고자 한다.

Keywords

Acknowledgement

본 연구는 우주센터 선진화사업의 지원을 받아 수행된 연구임.

References

  1. Choi, B.G., and Na, Y.W. (2009). "A Study on the Configuration Management System of Long Span Bridge Uding Multi GPS Sensor." Korean Journal of Geomatics, 27(3), pp. 385-392.
  2. Choi, N.K., Kim, S.H., and Han, Y.M. (2016). "Investigation of Infrastructure of Propulsion Test Facility of Liquid Rocket." 2016 KSPE Fall Conferrence, pp. 1-5.
  3. Department of Defense, Department of Defense Handbook (MIL-HDBK-61B) (2020). Configuration Management Guidance.
  4. Department of Energy, DOE Standard (DOE-STD-1073-2003) (2003). Configuration Management.
  5. International Atomic Energy Agency, IAEA-TECDOC-1651 (2010). Information Technology for Nuclear Power Plant Configuration Management.
  6. International Standard, ISO 10007 (2017). Quality Management - Guidelines for Configuration management.
  7. Kang, M.Y. (2015). "Framework and Assessment of Configuration Management (CM) in Nuclear Power Plants based on Structures, Systems, Components (SSCs)." MS Thesis, Myongji University.
  8. Kitsche, W. (2010). "Operation of a Cryogenic Rocket Engine." Springer Aerospace Technology, pp. 80-82.
  9. Ko, H.U. (2009). "Development of Change Process for Configuration Management in Construction Project Management." MS Thesis, Chungbuk National University.
  10. Ko, H.U., and Park, H.K. (2009). "A Study of Development of Change Process for Configuration Management in Construction Project Management." Journal of the Architectural Institute of Korea, JAIK, 29(1D), pp. 81-89.
  11. Kim, D.Y., and Youn, C. (2011). "Traceability Enhancement Technique for Dependency Relations of Software Artifacts based on the Integration of Software Configuration." KIPS Transaction on Software and Sata Engineering, 18-D(6), pp. 451-460.
  12. Kim, K.H., Kyung, T.W., and Song, Y.J. (2012). "Configuration Management Using Dependency Analysis of Software Change Visibility." Journal of Digital Convergence , 10(1), pp. 335-339. https://doi.org/10.14400/JDPM.2012.10.1.335
  13. Lee, J.M. (2017). "A Study on Development and Application of Configuration Management Model for Railway Construction Project." MS Thesis, Seoul National University do Science and Technology.
  14. National Aeronautics and Space Administration, NASA Technical Standard (NASA-STD-0005) (2013). NASA Configuration Management (CM) Standard.
  15. Ryu, D.S. (2013). "A Study on the Configuration Management System Development for Nuclear Power Plant." MS Thesis, Soongsil University.
  16. Schurmanns, R. (2014). "Maintenance of test facilities for rocket engines." DLR e.V.RA-VEA.