• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.470-478
• /
• 2023

All people have human rights that should be protected, and today, the importance of protecting human rights is emphasized in all areas of society. The industry is also carrying out activities to protect the human rights of workers, such as implementing human rights education for human rights management and preparing a response system for human rights violations. However, due to the closed environment and special working conditions, seafarers on board are often placed in a blind spot in human rights protection. In particular, a number of cases of human rights violations concerning beginner seafarers, including cadets, have been identified, and relevant research is insufficient compared to other occupational groups. Jobs that restrict basic human rights cannot be envied by anyone. In this study, implications and problems were derived based on the results of a human rights survey of cadets, and cases of human rights violations, and improvement measures were proposed. The cadets had a very negative perception of human rights violations before boarding. However, it was found that their perception changed after boarding. It was confirmed that cadets have unnecessary fears and concerns before boarding. Improvement measures include the establishment of a legal system for the status of cadets, measures to alleviate non-physical human rights violations, improvement of human rights violations handling procedures and response systems, and enhancing the effectiveness of human rights education.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.2
• /
• pp.166-178
• /
• 2024

Objectives: The 12 occupational exposure limits(OELs) for chromium and its compounds in Korea were set by applying the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Values (TLVs). However, this is significantly different from the TLVs after the existing TLVs were integrated and withdrawn in 2018, so it is necessary to review the revision. Methods: Various documents related to chromium OELs were reviewed, including the ACGIH TLV Documentations for chromium and its compounds. A field survey was conducted targeting workplaces handling chromium and its compounds. Based on this, a revised OELs were proposed and a socio-economic evaluation was conducted. Results: The OELs for chromium compounds in Korea was first enacted in 2002, and in 2007, the OELs for chromium (hexavalent) compounds (insoluble) was lowered from 0.05 mg/m³ to 0.01 mg/m³. In 2008, the OELs for strontium chromate was newly established as 0.0005 mg/m³, and in 2018, the OELs for calcium chromate was newly established as 0.001 mg/m³. Total chromium and hexavalent chromium were measured for each of 6 samples at 2 welding sites, 4 plating sites, and 2 spray coating sites. When omparing the average of the results measured by ICP, a total chromium analysis method, and the analysis results by IC, a hexavalent chromium analysis method, only workplace 4 was the same, and total chromium was evaluated more, and total chromium was evaluated at 0.0004 to 0.0027 mg/m³. And hexavalent chromium was evaluated as non-detection ~ 0.0014 mg/m³. Amendment ①: The exposure standard for hexavalent chromium is not divided into water soluble, insoluble, chromium ore processing, and other hexavalent chromium compounds, and is integrated into 0.01 mg/m³, which is the level of chromium (hexavalent) compound (insoluble)., OELs for chromium (metal) and chromium (trivalent) compounds are integrated into chromium (trivalent) compounds, and the exposure level is maintained. Amendment ②: As in the amendment ①, the OELs are integrated, but the level is lowered to 0.005 mg/m³, which is the OELs of OSHA, and there is a grace period of 4 years. Amendment ③: As in the amendment ①, the OELs are integrated, but the level is lowered to 0.0002 mg/m³, which is the exposure standard of ACGIH, and there is a grace period of 5 years. Conclusions: Amendment ①: The change in the OELs is insignificant, so the cost required is small, and the benefit/cost ratio is greater than 1, so there is no problem in applying the amendment. Amendment ②: In all scenarios except chromium 6(insoluble), the benefit/cost ratio is greater than 1, so it is thought that there will be no major problem in applying the amendment. Amendment ③: Since the benefit/cost ratio is less than 1 in all scenarios, it is thought that the total social benefit that can be obtained when applying the amendment is not large.

• Journal of agricultural medicine and community health
• /
• v.35 no.4
• /
• pp.417-427
• /
• 2010

Objectives: This study was conducted to develop a Korean version of the Participatory Action Oriented Training (PAOT) program and training materials for improvement of agricultural working environments. Methods: The PAOT manual and checklist were developed on the basis of the original English version of the training materials, a questionnaire survey of agricultural health and safety professionals, and a brainstorming conference. Good example pictures were collected through visits to agricultural workers' houses, and an easily understandable picture was drawn by an animation specialist. A PAOT action manual and five types of action checklists were developed for use in different agricultural environments. Each action checklist contained six categories and 38 items of agricultural health and safety principles; the six categories were material storage and handling, work stations and tools, machine safety, physical environment, working schedule and organization, and basic health and safety management. Incorporating these training materials, a one-day Korean PAOT program was developed. Results: Among 307 candidate agricultural workers from four rural Korean villages, 94 workers (59 males, 35 females) participated in a PAOT from July 2007 to Oct 2008. The PAOT program was successful and the mean self-estimated satisfaction score of the participants was greater than 90%. Conclusions: A Korean PAOT program and training materials were successfully developed and applied to Korean agricultural workers. Although more studies are needed, it is expected that PAOT will greatly contribute to the improvement of agricultural working conditions and health and safety through the use of agricultural workers' self initiatives.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.123-130
• /
• 2023

Salmonella spp. are prevalent foodborne pathogens that are infective at relatively low concentrations, thus posing a serious health threat, especially to young children and the elderly. In several countries, the management and regulation of Salmonella spp. in food, including seafood, adhere to a negative detection standard. The risk of infection is particularly high when seafood is consumed raw, which underscores the importance of timely detection of pathogenic microorganisms, such as Salmonella. Accordingly, this study aimed to develop a combined pre-treatment and detection method that includes pre-culture and DNA extraction in order to detect five species of Salmonella at concentrations below 10 CFU/mL in seafood. The effectiveness of the proposed method was assessed in terms of the composition of the enrichment (pre-culture) medium, minimum incubation time, and minimum cell concentration for pathogen detection. Furthermore, a practical DNA extraction method capable of effectively handling high salt conditions was tested and found to be successful. Through polymerase chain reaction, Salmonella spp. Were detected and positively identified in shellfish samples at cell concentrations below 10 CFU/g. Thus, the proposed method, combining sample pre-treatment and cell culture with DNA extraction, was shown to be an effective strategy for detecting low cellular concentrations of harmful bacteria. The proposed methodology is suitable as an economical and practical in situ pre-treatment for effective detection of Salmonella spp. in seafood.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.5
• /
• pp.746-756
• /
• 2016

The purpose of this study was to investigate food safety knowledge, food safety attitudes, and handling behavior in the elderly. The survey was conducted on 358 individuals over 65 years old in urban and rural areas. Data were analyzed with descriptive analysis and ${\chi}^2$ test analysis of variance using SPSS. From the results on elderly's food safety knowledge, the item 'tangerines should be washed before eating' was correctly answered by urban subjects (75.4%) than rural subjects (49.7%). 'Is it okay to cook meat left on the sink since afternoon in the evening' showed the lowest correct answer rate in both urban (23.1%) and rural (31.9%) subjects. For the item related to food keeping, 'Bacterial cells do not multiply in Samgyetang when it is kept in a refrigerator right after boiling thoroughly', 58.5% of urban and 54.6% of rural elderly answered correctly. Most elderly people showed a tendency to think that boiled foods might be safe to eat. Secondly, for food safety attitudes, urban elderly had more proper attitude regarding the item, 'Namul is very tasty only when mixed with bare hands' (disagree rate 34.9%) than rural elderly (P<0.05)'. On the other hand, rural elderly had more positive attitudes regarding the store principle "first in, first out" compared to urban elderly (P<0.001). Thirdly, regarding food safety behaviors, only 67.9% of urban and 58.7% of rural elderly responded that they washed their hands right after answering the telephone while cooking. Exactly 33.8% of urban and 39.6% of rural older people replied 'defrost meat on top of sink or table' as the defrost method for frozen foods, showing that elderly did not recognize the risk of foodborne illness during improper defrosting at room temperature.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2019

The health benefits associated with consumption of fresh produce have been clearly demonstrated and encouraged by international nutrition and health authorities. However, since fresh produce is usually minimally processed, increased consumption of fresh fruits and vegetables has also led to a simultaneous escalation of foodborne illness cases. According to the report by the World Health Organization (WHO), 1 in 10 people suffer from foodborne diseases and 420,000 die every year globally. In comparison to other processed foods, fresh produce can be easily contaminated by various routes at different points in the supply chain from farm to fork. This review is focused on the identification and characterization of possible sources of foodborne illnesses from chemical, biological, and physical hazards and the applicable methodologies to detect potential contaminants. Agro-chemicals (pesticides, fungicides and herbicides), natural toxins (mycotoxins and plant toxins), and heavy metals (mercury and cadmium) are the main sources of chemical hazards, which can be detected by several methods including chromatography and nano-techniques based on nanostructured materials such as noble metal nanoparticles (NMPs), quantum dots (QDs) and magnetic nanoparticles or nanotube. However, the diversity of chemical structures complicates the establishment of one standard method to differentiate the variety of chemical compounds. In addition, fresh fruits and vegetables contain high nutrient contents and moisture, which promote the growth of unwanted microorganisms including bacterial pathogens (Salmonella, E. coli O157: H7, Shigella, Listeria monocytogenes, and Bacillus cereus) and non-bacterial pathogens (norovirus and parasites). In order to detect specific pathogens in fresh produce, methods based on molecular biology such as PCR and immunology are commonly used. Finally, physical hazards including contamination by glass, metal, and gravel in food can cause serious injuries to customers. In order to decrease physical hazards, vision systems such as X-ray inspection have been adopted to detect physical contaminants in food, while exceptional handling skills by food production employees are required to prevent additional contamination.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.145-176
• /
• 2016

Aviation safety can be secured through regulations and policies of various areas and thorough execution of them on the field. Recently, for aviation safety management Korea is making efforts to prevent aviation accidents by taking various measures: such as selecting and promoting major strategic goals for each sector; establishing National Aviation Safety Program, including the Second Basic Plan for Aviation Policy; and improving aviation related legislations. Obstacle limitation surface is to be established and publicly notified to ensure safe take-off and landing as well as aviation safety during the circling of aircraft around airports. This study intends to review current aviation obstacle management system which was designed to make sure that buildings and structures do not exceed the height of obstacle limitation surface and identify its operating problems based on my field experience. Also, in this study, I would like to propose ways to improve the system in legal and regulatory aspects. Nowadays, due to the request of residents in the vicinity of airports, discussions and studies on aviational review are being actively carried out. Also, related ordinance and specific procedures will be established soon. However, in addition to this, I would like to propose the ways to improve shortcomings of current system caused by the lack of regulations and legislations for obstacle management. In order to execute obstacle limitation surface regulation, there has to be limits on constructing new buildings, causing real restriction for the residents living in the vicinity of airports on exercising their property rights. In this sense, it is regarded as a sensitive issue since a number of related civil complaints are filed and swift but accurate decision making is required. According to Aviation Act, currently airport operators are handling this task under the cooperation with local governments. Thus, administrative activities of local governments that have the authority to give permits for installation of buildings and structures are critically important. The law requires to carry out precise surveying of vast area and to report the outcome to the government every five years. However, there can be many problems, such as changes in the number of obstacles due to the error in the survey, or failure to apply for consultation with local governments on the exercise of construction permission. However, there is neither standards for allowable errors, preventive measures, nor penalty for the violation of appropriate procedures. As such, only follow-up measures can be taken. Nevertheless, once construction of a building is completed violating the obstacle limitation surface, practically it is difficult to take any measures, including the elimination of the building, because the owner of the building would have been following legal process for the construction by getting permit from the government. In order to address this problem, I believe penalty provision for the violation of Aviation Act needs to be added. Also, it is required to apply the same standards of allowable error stipulated in Building Act to precise surveying in the aviation field. Hence, I would like to propose the ways to improve current system in an effective manner.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.

• Korean Security Journal
• /
• no.59
• /
• pp.37-69
• /
• 2019

According to viewpoints of researchers and stakeholders, various opinions can be suggested on self-governing police system. Therefore, success of Korean self-governing police system will be defending on how to balance among conflicting values such as Empowerment, Political neutrality, Financial issues, Comprehensive competence in maintaining public safety. Before the launching of self-governing police system nation-wide, the experience of Jeju provincial police will be valuable model case. In specific, enlargement of work scope of self-governing police in Jeju province which has been introduced since last year will be a useful reference. There is more pessimism about self-governing police of Jeju province so far. However, this perspective is mostly based on the issue regarding hardwares such as manpower, equipment, law and organization. Issues regarding softwares such as organizational culture, operation system and work process need more attention to evaluate self-governing police system properly. To mark the first year after enlargement of work scope of Jeju police, this study demonstrate the overall result and implications of self-governing police of Jeju province based on documents, statistics, reports and media reports. In result, several preconditions are needed to implement the self-governing police system nation-wide successfully. 1. Strengthen the link between local government and local police 2. Establish the foundation for collaboration of state and local police 3. Enhance the aspect of citizen autonomy in local level 4. Reinforcing the capability of handling situation of state and local police 5. Invigorating the inter-organizational working group to operate self-governing police system effectively. The self-governing police system is unclosed topic to discuss. After this study, in-depth studies should be followed with more resources. Particularly, additional perspective including redundancy and equity need to be considered regarding self-governing police. By getting with the changes of macroscopic trends - lowbirth and aging, the fourth industrial revolution and possible reunification of north and south Koreas - these studies should suggest the long-term blueprint of self-governing police system of Korea.