• Journal of Food Hygiene and Safety
• /
• v.34 no.6
• /
• pp.551-556
• /
• 2019

Recently, due to the fact that the mineral content in the wash water of the GAP-certified melon exceeds the GAP wash water standards, there are cases where the certification cannot be maintained. Therefore, agricultural industry demand requesting relaxation of the inorganic elements standard for water quality has been increasing, taking into account the consumption characteristics of Korean melon, which is eaten after removing the peel. This study was conducted to evaluate the human risks of four inorganic materials (fluorine, arsenic, iron and manganese) based on the water quality data of 142 samples of groundwater that was used for washing GAP-certified Korean melon in Seongju area from 2017 to 2019. As a result, the HQ of four minerals in Koreans who consumed groundwater used for washing GAP-certified Korean melons in the Seongju area was below 0.10 on average. In particular, in the case of iron and manganese which are esthetic influence substances, the average HQ was 0.00. The overexposure group showed 0.01, which was lower than the HQ (average 0.01, overexposure group 0.03) of the group that consumed Korean melon. Based on all the results, even if the groundwater of the Seongju area is used to wash GAP-certified Korean melon, the impact from these four inorganic materials, including iron and manganese, for Korean population consuming Korean melon will be minimal.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.433-440
• /
• 2019

Offshore working environments such as ships, offshore oil and gas plants, and offshore wind turbines are isolated and directly exposed to rough seas, which pose high risks of safety accidents. Therefore, all workers in offshore plants should be able to cope with emergency situations and must be qualified according to relevant laws and regulations such as the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW Convention) and Offshore Petroleum Industry Training Organization (OPITO) standards. In particular, marine workers should be able to perform cardiopulmonary resuscitation (CPR) in isolated locations or enclosed and confined spaces such as those in life-boats, life-rafts, rescue-boats, etc. Because the floor material is made of rubber, it may be difficult to perform chest compressions in life-rafts used to escape from emergency situations in ships or offshore plants. Chest compressions performed on life-rafts may reduce the accuracy of CPR and increase fatigue for those providing aid. To measure the accuracy and fatigue of those performing CPR in life-rafts, 15 experimenters with more than five years of experience as first aid instructors were exposed to different CPR environments in a marine safety training center equipped with an artificial wave generator. The results showed that the accuracy of CPR in the classroom was 99.6 %, but that in various life-raft environments was only 84 %. T-verification of the two sites confirmed the reduced accuracy of CPR performed on life-rafts. CPR on life-rafts should be performed in groups of two and with the use of automated chest compression devices.

• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.203-209
• /
• 2015

The heat detector detects heat in the fire and is an important core element of the automatic fire alarm system used generally for every fire prevention objects. The heat detector is distinguished in spot type and spread type and in spot type, there are differential and thermistor types. These heat detectors give a great influence on the loss of people and property according to the sensitivity of response such as operation time and operation temperature in actual fire and in overseas people apply it for the development of products that can be operated in the early stage of fire including certification, quality management, and comparison standard by introducing response time index through the theory of heat balance that considers the heat loss and ventilation tests. In Korea, the response time index is introduced and used in the head of sprinkler products, but it is not applied to the heat detector at present. It is necessary to introduce the response time index that shows the sensitivity of response of the heat detector the installation standard for the heat detector that the response time index is applied should be different according to the fire weight, danger degree of fire, and shape of buildings. Through this study, it tries to help reduce lives and property of people through the swift warning by installing detectors suitable for the building structure.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.161-169
• /
• 2022

The government [3] specifies steel pipe scaffolding as conventional scaffolding and is promoting the installation of system scaffolding, an integrated work platform, and avoidance of the use of steel pipe scaffolding as much as possible. However, in places where equipment cannot enter, such as power plants and plant sites, places the structure is complex, and places where scaffolding cannot be stacked on the ground, there is no choice but to install steel pipe scaffolding. When installing steel pipe scaffolding on an H-beam structure at a high place, the performance of the steel frame clamp is very important in order to form a work space which workers can work safely. In this study, the displacement magnitude and tensile load of members in each installation direction of the clamp for steel frame were verified through performance tests and structural analysis modeling. As a result, it was confirmed that the performance for each installation direction satisfies the safety certification standard tensile load of 10,000N. Although the performance value is satisfactory, deformation of the attachment pressing bolt was verified and was confirmed to have minimal deformation. Thus, to ensure the load is properly to the attachment body, the clamp for a steel frame must be installed in the direction in which the load is transmitted.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1265-1272
• /
• 2015

This study aims at comparison and analyzing of marine officer license system for fishing vessels between South Korea and New Zealand. It is urgently required to establish Republic of Korea-New Zealand mutual certification system for marine officers who are on board ships within applicable area given that New Zealand will force foreign fishing vessels within New Zealand area to reflag from 2016 in accordance with the amendment of Fisheries Act. Secondly, to compare and analyze systems between two countries will contribute to the preparatory work related to ratification STCW-F convention as New Zealand already have completed law amendment to adapt the convention. Maritime law of New Zealand, Seafarers Act and Ship Personnel Act of Republic of Korea were compared and analyzed as references. The result showed that an improvement to corresponding level to the international convention and development of safety training by vessel type, and job descriptions according to the license class are needed to Republic of Korea system. Furthermore, it is suggested to prepare specialized training for deckhands as required in STCW-F convention and standard fishing vessel officer training record for designated institute of education. Therefore institutional complementarity and framework is required as it is expected that the nations of fishing in piscary demand to reflag Korean deep-sea fishing vessels or to ratify the STCW-F convention.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.141-144
• /
• 2007

BLUs are major component in LCD industry which occupies 90% or more of FPD market worldwide and BLU market is expected to be expanded continuously according to the trend of miniaturization, slimness, low power consumption and low weight. The larger the BLU market scale, the more important standardization of performance evaluation techniques to clearly prescribe the product specification. Currently the government is promoting the establishment of related laws and coincidence with international standards to cope with agreements such as WTO/TBT, but the nongovernmental standardization activities are not enough to be actualized. Furthermore, BLU related components such as CCFL, EEFL, inverter and reflector are already developed for localization to substitute imports with home products but collective standardization, national standardization, and international standardization are still not done. So, performance specifications and evaluation methods for normal fluorescent lamps or industrial lamps are being adopted and used as national standards and safety certification standards instead. Making these standards enables to prepare a chance to penetrate into global market and to promote world best products. Also, by making this collective standard, it provides chances to take part in international standardization activities, to protect domestic industries and technologies, to obtain the trend of advanced technologies, and to be predominant over other countries. That is to say, CCFL standardization helps raise 21st century national strategic technology policy and go ahead of globalization of core technologies.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.3
• /
• pp.49-57
• /
• 2018

Purpose: The increase in patients requiring hemodialysis has resulted in an increase dialysis-associated infections risk. but there are no Renal Dialysis unit design standard meet specified safety and quality standards. Therefore, appropriate Establish standards and legal regulation is important for the provision of initial certification and maintenance of facility, equipment, and human resource quality. Methods: Literature survey on the design guideline and standards of Renal Dialysis unit design in Korea, U.S, Germany, Singapore, Hongkong, Dubai. Results: There are no established standards for facilities in dialysis units in Korea. To prevent infections in dialysis patients, necessary establish standards. Considering the domestic and overseas Health-care facilities standards, the major factors to be considered in the medical environment for Renal Dialysis Unit are as follows. First, planning to separate Clean areas(treatment area) from contaminated areas(medical waste storage area). Second, ensure sufficient space and minimum separation distance. Although there may be differences depending on the circumstances of individual institutions, renal dialysis unit consider the space to prevent droplet transmission. Third, secure infrastructure of infection prevention such as sufficient amount of hand hygiene sinks. Hand washing facilities for staff within the Unit should be readily available. Hand hygiene sinks should be located to prevent water from splashing into the treatment area. Fourth, Heating, ventilation and air conditioning (HVAC) system for Renal Dialysis Unit is all about providing a safer environment for patients and staff. Implications: The results of this paper can be the basic data for the design of the Renal Dialysis Units and relevant regulations.

• Korean Journal of Occupational Health Nursing
• /
• v.18 no.2
• /
• pp.252-261
• /
• 2009

Purpose: The purpose of this study was to determine factors affecting the burden on employment of occupational health care providers as well as to develop strategies to reduce burden on employment of them in the middle size manufacturing enterprises. Methods: The target population of this study was 123 managers working in the middle size manufacturing enterprises. The study questionnaires were selected, as theories and literature suggested, for explaining employment burden, general characteristics of participants and occupational health providers, general characteristics of companies, evaluation of occupational health provider's role and burden score. Results: The mean of employment burden score of manager was 2.2. There was a significant difference in the employment burden scores, manager's age and education, and occupational health provider's age, type of work, certification, and employment status. Also there was a negative relationship between employment burden scores and occupational health provider's role scores (need, role, satisfaction, and benefit). In the results of the standard multiple regression analysis, manager's need scores on occupational health providers were significant predictors of the employment burden scores. Conclusion: It is necessary to change the manager's perception to promote employment of occupational health providers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.283-290
• /
• 2017

Objectives: This study aimed to evaluate the relationship between filter replacement and filter performance change in particulate filters used in the workplace. Methods: Three types of particulate respirator filters are mainly used in the workplaces. These were tested against the filter performance safety certification standard for dust masks established by the Ministry of Employment and Labor(MoEL). Used filters were collected to test their performance, such as filter pressure drop, efficiency, and quality factors. All these factors were evaluated by a filter tester. To compare filter performance between used and new ones, the same kinds of new filters were also tested together under the same procedures. Results: A total of 270 used filters were collected for testing. The main reasons to replace the filters were difficulty in breathing(46.2%), dirty/odor influx(19.7%), and a combination of factors(26.7%). The pressure drop for two special class groups was significantly different(new filters: $20.72{\pm}3.33mmH_2O$; used filters: $24.70{\pm}5.26mmH_2O$, p<0.0001). In the case of penetration, new filter groups indicated $0.0032{\pm}0.0040%$, while that of the used filters was $0.0596{\pm}0.1187%$. The quality factor for the used filters($0.34{\pm}0.09$) significantly decreased compared to the new filters($0.53{\pm}0.08$) (p<0.0001). Conclusions: Filter performance including pressure drop, penetration, and the quality factor was evaluated and compared between new and used filters in the workplace. The results showed that general filter performance deteriorated more for change of pressure drop, penetration and the quality factor.

• Journal of Nutrition and Health
• /
• v.46 no.5
• /
• pp.470-481
• /
• 2013

This study provides standardized scientific criteria for education materials on nutrition and diet that could be used in schools, workplaces, and health and medical facilities. The study was conducted from April 2011 to October 2011. Literature reviews, institutional visits, and telephone interviews were conducted for the first draft of the accreditation criteria. Expert meeting and advisory councils were conducted in order to obtain feedback after development of the first draft of accreditation criteria. In order to verify the validity and reliability of the first draft on certification criteria, a survey was sent out to 143 professionals, including professors, researchers, health and medical experts, teachers, nutrition teachers, dietitians, and clinical nutritionists. After several modifications, the final accreditation criteria were established for 1) printed materials (authority, credibility, objectivity, organization, editing, real-life usability, activities and participation, and public interest), 2) web-sites (authority, credibility, objectivity, design, real-life usability, accessibility, currency, and public interest) and 3) materials with activities (credibility, organization, design, convenience of utilizing, safety, and public interest). Out of several criteria, contents (authority, credibility. and objectivity) and publicity (public interest) areas are mandatory requirements. For the accreditation, books for learning and materials with activities are required to meet more than six evaluation components, and the other materials are required to meet more than five evaluation components, including the required area. Accreditation criteria developed in this study could be used as a standard for development or selection of good education materials for nutrition and dietary life.