• 한국안전학회지
• /
• 제19권3호
• /
• pp.70-77
• /
• 2004

A Reasonable lighting should be provided for doing night work. All works far construction site can be exposed to potential hazard at night work The purpose of this study is to provide a standard of the lighting against accidents due to insufficient lighting at site. one pilot tea one at building work site, one at mad work site of it have been conducted for figuring out illumination change depending worker's activity direction, using lux checker to show it as numerical indication. The direction are changed with a range of 30, 60, 90, and 135 degree to be checked at site. Tests results show that $10\%\;and\;15\%$ of lighting could be decreased by changing the working direction of works at site. Therefore, steep slope place, cave work and backside of structural elements such as a column, deep beam should be considered for keeping sufficient and reasonable lighting. It is found that $50\%more$ illumination Lux needs f3r civil work than for building work.

• 한국안전학회지
• /
• 제36권1호
• /
• pp.9-17
• /
• 2021

This study analyses the load imbalance of the tower crane used in telescoping work for structural safety, owing to the difference in wind speed and balance weight position. This is because wind speed and position of the balance weight have a significant impact on the structural stresses of a tower crane during telescoping work. Therefore, structural analysis was performed on the 290HC model, which is often used at construction sites and has only one cylinder installed. Moreover, two models were classified to determine the load acting on the connecting part of the telescopic cage to slewing platform and the cylinder. Five types of balance weight positions were applied at regular intervals from jibs; moreover, four types of wind load criteria were differently applied. Hence, the telescopic cage columns were destroyed at all balance weight positions at a wind speed of 30 m/s and only at certain locations at a wind speed of 20 m/s. Furthermore, failures occurred for cylinders, torsional, and bending at wind speeds of 30 m/s and 20 m/s, load imbalances above the allowable thresholds considering the safety factor. In addition, the load imbalance in the telescoping work also varied depending on the position of the balance weights. The results of these studies have validated that the current standards of adjusting the appropriate position of the balance weights on the jib are completely valid, with the telescoping work to be executed only at wind speeds of less than equal to 10 m/s.

• 기술사
• /
• 제41권6호
• /
• pp.53-56
• /
• 2008

Having met in Seoul, Republic of Korea, on 29 June 2008 on occasion of the 18th World Congress on Safety and Health at Work, jointly organized by the International Labour Office (ILO), the International Social Security Association (ISSA) and the Korea Occupational Safety and Health Agency (KOSHA), with the participation of senior professionals, employers' and workers' representatives, social security representative, policy-makers and administrators. Recognizing the importance of cooperation among international organizations and institutions. Welcoming progress achieved through international and national efforts to improve safety and health at work.

• Safety and Health at Work
• /
• 제13권3호
• /
• pp.372-375
• /
• 2022

In the globalized field of safety, health, and well-being, the need to build multi-stakeholder alliances to find solutions to complex challenges is growing. This requires common ground for collaboration, as well as concepts and tools to grasp and manage the areas of interest. Over recent years, Vision Zero has awakened interest and it continues to evolve into many forms of approaches and initiatives, which provide a strategic direction and practical tools for supporting the development of safety, health, and well-being at work. Consequently, there is a need to build a shared understanding of 'zero'. This article reflects the potential of Vision Zero as a bridging concept and an approach for building multi-stakeholder collaboration. Thus, we present a multi-perspective framework of Vision Zero to support further dialoge and collaboration in joint undertakings.

• Safety and Health at Work
• /
• 제1권2호
• /
• pp.158-166
• /
• 2010

Objectives: This study aimed to find gender distinctions in terms of the sociology of the population; to determine work-related factors; to analyze gender differences in daily living, work, sports, and art performances; and to identify gender-related factors that limited performance of daily living and work activities. Methods: A questionnaire was designed that included disabilities of the arm, shoulder, and hand (DASH), accident history, disease history, work duration at current workplace, marital status, job satisfaction, job autonomy, and physical demands of the job. Out of 1,853 workers surveyed, 1,173 questionnaires (63.3%; 987 males, 186 females) included responses to DASH disability and DASH optional work and were judged acceptable for analysis. Results: Upper extremity functional limitation during work and daily living was higher for females than males. The limitations for males increased according to their household work time, accident history, work duration, job satisfaction, physical demand, and job autonomy. Meanwhile, female workers' upper extremity discomfort was influenced by their disease history, job satisfaction, and physical demands. In addition, the size of the company affected male workers' upper extremity function, while marriage and hobbies influenced that of female workers. Conclusion: This study addressed sociodemographic factors and work-related factors that affect each gender's upper extremity function during daily living and working activities. Each factor had a different influence. Further studies are needed to identify the effect that role changes, not being influenced by risks at work, have on musculoskeletal disorders.

• Safety and Health at Work
• /
• 제3권3호
• /
• pp.155-165
• /
• 2012

Reflecting the current international trends toward proactive risk assessment and control at work with practical procedures, participatory action-oriented approaches are gaining importance in various sectors. The roles of these approaches in promoting the safety and health at work are discussed based on their recent experiences in preventing work-related risks and improving the quality of work life, particularly in small-scale workplaces. The emphasis placed on the primary prevention at the initiative of workers and managers is commonly notable. Participatory steps, built on local good practices, can lead to many workplace improvements when the focus is on locally feasible low-cost options in multiple aspects. The design and use of locally adjusted action toolkits play a key role in facilitating these improvements in each local situation. The effectiveness of participatory approaches relying on these toolkits is demonstrated by their spread to many sectors and by various intervention studies. In the local context, networks of trainers are essential in sustaining the improvement activities. With the adequate support of networks of trainers trained in the use of these toolkits, participatory approaches will continue to be the key factor for proactive risk management in various work settings.

• Safety and Health at Work
• /
• 제9권4호
• /
• pp.388-397
• /
• 2018

Background: The study analyzes penalties imposed on organizations for breaching safety and health regulations. The research questions are as follows: what are the commonly breached safety and health regulations? How proportional are penalties imposed on organizations for breaching health and safety regulations in the United Kingdom? Methods: The study employed sequential explanatory mixed research strategies for better understanding of health and safety penalties imposed on organizations. Actual health and safety convictions and penalties data for 10 years (2006 to 2016) were obtained through the United Kingdom Health and Safety Executive (HSE) public register for convictions. Overall, 2,217 health and safety cases were analyzed amounting to total fines of £37,179,916, in addition to other wide-ranging penalties. For thorough understanding, eight interviews were conducted with industry practitioners, lawyers, and HSE officials as part of the study qualitative data. Results: Findings show that the Health and Safety at Work (HSW) Act accounted for 46% of all HSE prosecution cases in the last decade. This is nearly half of the total safety and health at work prosecutions. Moreover, there is widespread desire for organizations to comply with the HSW Act, but route fines are seen as burdensome and inimical to business growth. Conclusion: A key deduction from the study reveal significant disproportionality concerning penalties imposed on organizations for breaching safety and health regulations. On aggregate, small companies tend to pay more for health and safety offenses in a ratio of 1:2 compared to large companies. The study also reveals that the HSW Act accounted for nearly half of the total safety and health at work prosecutions in the last decade.

• Safety and Health at Work
• /
• 제3권4호
• /
• pp.278-286
• /
• 2012

Objectives: Authors investigated the pattern of the rate of occupational injuries and illnesses (ROII) at the level of enterprises in order to build a network for exchange of experience and knowledge, which would contribute to workers' safety and health through safety climate of workplace. Methods: Occupational accidents were analyzed at the manufacturing work site unit. A two step clustering process for the past patterns regarding the ROII from 2001 to 2009 was investigated. The ROII patterns were categorized based on regression analysis and the patterns were further divided according to the subtle changes with Mahalanobis distance and Ward's linkage. Results: The first clustering of ROII through regression analysis showed 5 different functions; 29 work sites of the linear function, 50 sites of the quadratic function, 95 sites of the logarithm function, 62 sites of the exponential function, and 54 sites of the sine function. Fourteen clusters were created in the second clustering. There were 3 clusters in each function categorized in the first clustering except for sine function. Each cluster consisted of the work sites with similar ROII patterns, which had unique characteristics. Conclusion: The five different patterns of ROII suggest that tailored management activities should be applied to every work site. Based on these differences, the authors selected exemplary work sites and built a network to help the work sites to share information on safety climate and accident prevention measures. The causes of different patterns of ROII, building network and evaluation of this management model should be evaluated as future researches.

• Safety and Health at Work
• /
• 제4권4호
• /
• pp.210-215
• /
• 2013

Background: This study aimed to identify the impacts of job stress and cognitive failure on patient safety incidents among hospital nurses in Korea. Methods: The study included 279 nurses who worked for at least 6 months in five general hospitals in Korea. Data were collected with self-administered questionnaires designed to measure job stress, cognitive failure, and patient safety incidents. Results: This study showed that 27.9% of the participants had experienced patient safety incidents in the past 6 months. Factors affecting incidents were found to be shift work [odds ratio (OR) = 6.85], cognitive failure (OR = 2.92), lacking job autonomy (OR = 0.97), and job instability (OR = 1.02). Conclusion: Patient safety incidents were affected by shift work, cognitive failure, and job stress. Many countermeasures to reduce the incidents caused by shift work, and plans to reduce job stress to reduce the workers' cognitive failure are required. In addition, there is a necessity to reduce job instability and clearly define the scope and authority for duties that are directly related to the patient's safety.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.72-78
• /
• 2008

In any form of construction work, it is essential that accidents be prevented at every stage from foundation preparation to build completion. For this, it is necessary to use models that can assess risk and provide instruction for safe work processes so that the risk of accidents is reduced. Currently, however, very few models can perform these tasks. In this paper, we presents a model that assesses risk quantitatively by analyzing risk factors involved in stage of construction such as foundation work, erection work, structural work, equipment work, finishing work and etc work. The model performs assessment based on examples of accidents and by investing actual conditions during construction. In addition, we presents in this paper a safety management system was developed to assess risk during construction and to effectively train laborers.