• 한국유기농업학회지
• /
• 제9권1호
• /
• pp.17-27
• /
• 2001

To clarify the proper and safe duration of maturation periods for sawdust-pig manure composts, leaf lettuces were applied with pig manure composts fermented for 15, 30, 45, 60, 75 days and 1 year (control) and cultivated in a plastic house with or without additional PE film tunnel. The changes in physiochemical properties of soil and leaf lettuce growth were measured. Shorter duration of maturation periods enhanced the generation of N $H_3$ gas from the composts and resulted in significant decrease in seed germination, growth and yield of leaf lettuce. Under with and without PE tunnel conditions the concentration of N $H_3$ from compost over 3.8 and 2.1 mg/100g composts, respectively induced growth reduction. In proportion to the increase of maturation duration saw-dust containing pig manure exhibited decrease in C/N ratio, N $H_4^{+}$-N, N $H_4^{+}$N $O_3^{-}$ ratio but increase in N $O_3^{-}$-N contents. In case of applying pig manure compost without PE film tunnel condition the minimum maturation period of pig manure composts for safe leaf growth was 60 days, while minimum 75 days of maturation was required when applied with PE film tunnel. tunnel.

• 대한지역사회영양학회:학술대회논문집
• /
• 대한지역사회영양학회 1998년도 International Workshop School Lunch Program Expansion in Asia
• /
• pp.21-30
• /
• 1998

Sound nutrition is the basic foundation for the health of a population. Proper nutrition education through the school system can actualize the building of sound nutrition being provided at school lunch programs along with nutrition education can have far reaching impact to the health of the whole nation. In Hong Kong, the recent change over from a half day to full day school program signaled the need for a school lunch program. However, there has been no organized effort so far in Hong Kong to provide such service. School lunches are being provided by caterers who are more concerned about profits than food safetly. Alarming rates of food poisoning occurring recently in Taiwan school has further accentuated the importance of fool safety. With the advent of centralized food production technologies, Dietirians can apply their nutrition knowledge and integrate with food production processes such that safe, healthy and nutritious mcals can be produced in large quantities in a cost-effective manner serving he needs of the school children. This paper introduces the centralized food production concept, using some of the cool chill production centers for school lunch programs in the United States as examples to discuss how new technologies and management system can be integrated to yield the best outcome in food quality and safety.

• 한국정밀공학회지
• /
• 제33권9호
• /
• pp.739-744
• /
• 2016

The truck that is used as running equipment for tank freight car support is a core structural part that supports the load of the car body and significantly influences the safety of freights and vehicles, as well as their running performance. Running equipment is composed of truck frames, wheels and wheel axles, independent suspensions, and brakes. Among these components, the truck frame supporting the load of the vehicles and freights may be the most important component. This study was carried out to analyze the structure of truck frames and to determine whether they are safe when the maximum vertical load, braking part load, and the front and rear load are applied to truck frames. This was achieved by subjecting the truck frames to stress tests and then measuring the stress on each part. The results of the stress tests showed that truck frames have a safe vehicle load design.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.825-831
• /
• 2023

The propellers used for big ships have a large diameter and are very heavy. In order to apply a precise and safe work process to them, it is necessary to use an exclusive turning system. For this reason, various techniques are applied to produce them. However, workers' convenience and safety are not taken into consideration enough at production sites. Conventionally, these propellers are designed to be separated as their turning system is loaded and rotated by empty weight. Therefore, it is necessary to replace such a design. This study tries to find the weaknesses of the design and structure of a conventional propeller turning system for large ships, to verify structure integrity of a structure in structural analysis, and to devise a plan for designing a new type of turning system. In the basic concept design and structural analysis for the turning system used in the propeller finishing process for large ships, this study drew the following conclusions. It was possible to develop the work process of the turning system for the propeller finishing process used for large ships, to obtain the dimensions for exterior design through a basic design. Structural analysis was conducted to find the structure integrity of the turning system. As a result, in the rail installed to transfer a gantry, the maximum stress was about 45MPa, about 5.5 times lower than the yield strength 250MPa. Therefore, the turning system was judged to be safe structurally.

• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.289-294
• /
• 2011

본 논문에서는 유한요소모델을 사용하여 원자력 발전용 해수여과장치에 대한 동적 내진해석을 수행하였다. 장치의 검증을 위해서 운전기준지진(Operating Basis Earthquake, OBE)과 안전정지지진(Safe Shutdown Earthquake, SSE)이 설계하중으로 작용하였을 때 부재에 미치는 영향을 평가하였다. 해석대상은 유한요소법을 사용하여 수학적 모델링을 완성하였고, 층응답스펙트럼(Floor Response Spectrum, FRS)에 따른 지진하중과 사하중 등을 적용하여 해석을 수행하였다. 해석된 해수여과장치의 최대변위는 OBE 조건에서 2.5mm이고, SSE 조건에서 최대변위는 4.6mm이다. 최대응력은 OBE 조건에서 24MPa, SSE 조건에서 44MPa이며, 이 값은 재료의 항복강도의 각각 18%, 27% 수준이다. 이에 따라 지진하중 조건에 따른 해수여과장치의 구조적 안전성이 제시되었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.347-350
• /
• 2003

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. At the commercial mushroom cultivation houses, this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted from Jan. 26, 2003 to Aug. 2, 2003. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Maximum temperature difference between the upper and lower growth stage during a heating time zone was about $6^{\circ}C$. The max. and min. relative humidity were ranged approximately $42{\sim}100%$. The $CO_2$ concentration and the illuminance were lowly maintained during growing period. The average yield per bottle was about $54{\sim}102g$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.822-824
• /
• 1998

The lithium polymer battery with polymer electrolyte is expected as a safe and long cycle life battery. This paper reports primarily the recent development results of a solid polymer electrolyte, which is a key point of the secondary battery system. The new type of polymer electrolyte was prepared under a dry Ar atmosphere by dissolving $LiCIO_4$ in a matrix of EC, PC and then dispersing polyacrylonitrile(PAN). Also adding some inorganic filler $Al_2O_3$. The dispersed solution heated at $120^{\circ}C$. The polymer electrolyte were characterized by EIS(Electrochemical Impedance Spectroscopy), TGA(Thermo Gravimetric analysis), DMA(Dynamic Mechanical Analyzer), DSC (Differential Scanning Calorimetry). The lithium ion yield is 0.29 when PAN-$Al_2O_3$ which was applied DC 5mV. The ionic conductivity of PAN, PAN-$Al_2O_3$ polymer electrolytes were showed $1.0{\times}10^{-4}S/cm$, $8.4{\times}10^{-4}S/cm$ at room temperature. When inorganic filler was added in the polymer electrolyte, ionic conductivity and lithium yield more larger than without inorganic filler.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.930-937
• /
• 2003

The extension of design life among power plants is increasingly becoming a world-wide trend. Kori #1 unit in Korea is operating two cycle. It has two man-ways for tube inspection in a steam generator which is one of the important components in a nuclear power plant. Especially, stud bolts fur man-way cover have damaged by disassembly and assembly several times and degradation for bolt materials for long term operation. It should be evaluated and compared by ASME Code criteria for integrity evaluation. Integrity evaluation criteria which has been made by the manufacturer is not applied on the stud bolts of nuclear pressure vessels directly because it is controlled by the yield stress of ASME Code. It can apply evaluation criteria through FEM analysis to damaged female threads and to evaluated safety fer helical-coil method which is used according to Code Case-N-496-1. From analysis results, we found .that it is the same results between stress intensity which got from FEM analysis on damaged female threads over 10％ by manufacture integrity criteria and 2／3 yield strength criteria on ASME Code. It was also confirmed that the helical-coil repair method would be safe.

• 한국농공학회지
• /
• 제43권6호
• /
• pp.113-119
• /
• 2001

Experiments on the yield strength of pipe connectors made of metal wire, joint pins, pole pipes, multi span insertion joints, and T-clamp joints used in pipe houses were conducted. The strength of connections of a pipe connector made of metal wire was adequate but it had a big difference according to loading direction. Therefore as it is installed, its direction should be taken into consideration. The collapse load of pipes connected with a joint pin was lower than that of single pipes. In the part of frame member at which the great bending moment occurs, the use of joint pin should be avoided. Also experimental results showed that pole pipes for use in a part of frame buried under the ground were safe, and the strength of multi span insertion joints should be increased. The resistant moment of T-clamp was about 13.7% of a single pipe. In case that the external forces acting on left and right rafter are different. a unsymmetrical rotational force is produced at the multi span joint. If it is expected that the actual bending moment on the multi span joint is larger than resistant moment of T-clamp, a reinforcement to safely resist the rotational force is required.

• 한국약용작물학회지
• /
• 제19권3호
• /
• pp.170-176
• /
• 2011

This study was carried out to investigate whether Chrysanthermum zawadskii var. latilobum Kitamura (C. zawadskii) extracts has an inhibitory effect against the mutagenicity by cigarette smoke condensates (CSC). C. zawadskii was extracted with 70% ethanol and the yield was 18.5%. We further fractioned 70% ethanol extract sequentially to diethylether, chloroform, dichloromethane, and aqueous water, and gained the yield of 17.5%, 5.6%, 5.8%, 32.8% and 35.5%, respectively. In the Ames test, there was no mutagenic effect of crude extract and its solvent fractions up to 2 mg/plate toward Salmonella typhimurium TA 98 with or without S-9 mix metabolic activations. On the contrary, the crude extract showed an inhibitory activity against the mutagenicity of CSC in the presence of S-9 mix metabolic activation. Diethyl ether layer among five solvent fractions showed the highest inhibitory activity. The inhibitory activity of diethyl ether fraction was also increased in a dose-dependent manner and the inhibitory rate was about 97.7% at the concentration of 1 mg/plate. In this study, we conclude that crude extract of C. zawadskii itself is potentially safe for mutagenicity, and the diethyl ether fraction has an inhibitory effect against the mutagenicity of CSC.