• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.207-212
• /
• 2003

The flash point are used to classify combustible liquids according to their relative flammability. The regulations for the safe handling, transportation, and storage of such substances are dependent on this classification, and the flash points are therefore of great important in the chemical industry.(omitted)

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.325-338
• /
• 1993

This study was conducted to evaluate the methods used in nursing procedures for infection control. Skilled nursing procedures are related to prevention of hospital infection. The sample consisted of 301 nurses’ response to the questionnaire. Data were collected from Feb. to March, 1993 from 35 hospitals located in five major cities. The findings of the study are as follows : 1) Rotatively unsafe nursing procedures were reported for preperation of IV therapy, change of IV site and aseptic dressing on IV site, hand wash-ing and use of paper towels, use of sterile urine bottle with indwelling urinary catheter, management of dressing cart, disinfection of transfer forcep, ambu respirator, laryngoscope, humidifier and handling of incubator. 2) Relatively safe nursing procedures were reported for management of suction tube, marking for contaminated materials and waste collection. The rate of participation in education programs for infection control by the nurses was higher than in other research results. 3) Further study on procedures for IV site in-fusion and care of dressing cart are recommended.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.83-88
• /
• 2012

For the safe handling of n-tridecane, the lower flash points and AITs(auto-ignition temperatures) by ignition delay time were experimented. Also lower explosion limits by the lower flash points were calculated. The lower flash points of n-tridecane by using closed-cup tester were experimented $92^{\circ}C$ and $96^{\circ}C$. The lower flash points and fire point of n-tridecane by using open cup tester were experimented 100 oC and 103 oC, respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 apparatus for n-tridecane. The experimental AIT of n-tridecane was 223 oC. The calculated lower explosion limit by using measured lower flash point 92 oC for n-tridecane was 0.6 Vol.%.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.169-172
• /
• 2000

Although extensive efforts have been devoted to the optimal design of composite laminated plates in recent years, some practical issues still need further research. One of them is the handling of the uncertainties in material properties, which were ignored in most researches in the past. In this paper, the convex modeling is used in calculating the failure criterion, given as constraint, to consider the uncertain material properties in the thickness optimization. Numerical results show that the optimal thickness increases when the uncertainties of elastic moduli considered, which shows such uncertainties should not be ignored for safe and reliable designs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.3
• /
• pp.251-257
• /
• 2012

Unmanned ground vehicles have important military, reconnaissance, and materials handling application. Many of these applications require the UGVs to move at high speeds through uneven, natural terrain with various compositions and physical parameters. This paper presents a framework for high speed autonomous navigation based on the integrated real time traversability. Specifically, the proposed system performs real-time dynamic simulation and calculate maximum traversing velocity guaranteeing safe motion over rough terrain. The architecture of autonomous navigation is firstly presented for high-speed autonomous navigation. Then, the integrated real time traversability, which is composed of initial velocity profiling step, dynamic analysis step, road classification step and stable velocity profiling step, is introduced. Experimental results are presented that demonstrate the method for a $6{\times}6$ autonomous vehicle moving on flat terrain with bump.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.85-90
• /
• 2014

For the safe handling of acetic anhydride, this study was investigated the explosion limits of acetic anhydride in the reference data. And the lower flash points, upper flash points, and AITs(auto-ignition temperatures) by ignition delay time were experimented. The lower and upper explosion limits of acetic anhydride by the investigation of the literatures recommended 2.9 Vol% and 10.3 Vol.%, respectively. The lower flash point of acetic anhydride by using Setaflash closed-cup tester was experimented $49^{\circ}C$. The lower flash point acetic anhydride by using Tag and Cleveland open cup tester were experimented $55^{\circ}C$and $62^{\circ}C$, respectively. Also, this study measured relationship between the AITs and the ignition delay times by using ASTM E659 tester for acetic anhydride. The experimental AIT of acetic anhydride was $350^{\circ}C$.

• Journal of Navigation and Port Research
• /
• v.32 no.4
• /
• pp.271-277
• /
• 2008

When performing steering by an autopilot (automatic steering gear), a sensitivity adjustment is mainly determined by P value and D value. These values differ in the optimal combination by model of ship and external forces. This research was carried out simulation case studies and examined movement of Pure Car Carrier, which easily received ship by wind pressure influence in low speed We investigated the relation of horizontal migration(transfer) of ship's body and P-D value. Based on it, four parameters of P-D at approaching berth could be suggested Hence there were suggestions of parameters; Distance to maximum lee point, Time to maximum lee point, Time to return to original course and Time to 300th second. The correlation of these parameters and P-D value were also considered. As a result, we think that this index, like formulated P-D, leads to an easy and safe navigation by utilizing these indices.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.11-20
• /
• 2000

Today, technologies and automation have been accelerated up in the industrial workplace. Nevertheless, many systems still require humans to handle materials manually. The Low Back Pain (LBP) is one of modern human being's most common and complex ailments. Many risk factors with the onset of LBP have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. The Virtual Reality(VR) is used in a variety of ways and often in a confusion and misleading manner. In order to solve the prevention of the LBP, a lifting box was translated in the Virtual Environment(VE). As simulating under the VE, optimal lifting works could be constructed. The purpose of this study is to reduce the chronical low back pain for the manual material handlers.

• Composites Research
• /
• v.19 no.3
• /
• pp.37-42
• /
• 2006

In the past, the technology of strengthening structures using FRP composites was still in its infancy, with very few publications on the technology available. However, recently strengthening of Reinforced concrete (RC) and other structures using advanced fibre-reinforced polymer/plastic(FRP) composites has become very popular in the last few years. As the well-known advantages of FRP composites including both good corrosion resistence and ease for site handling due to their light weight, also its design methods have been ensured the safe and economic use of this new technology, FRPs have been used widely and demonstrated in the field of aero industries etc. The purpose of this paper is to report the examples of the many diverse applications of Fiber Reinforced Plastic in construction materials of structures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.847-851
• /
• 2016

Due to global warming it is estimated that the arctic ocean route will be avaliable and traffic will increase by approximately year 2030. However, most navigation in the arctic is based on the ice breaker captains'orders, there is no exact measurement of convoy speed and distance between ships. So, this research was conducted to find out the minimum safe separation distance and minimum breaking distance via ship controling simulations, and the results are as stated. For breaking distances, for ships that have a lead distance which is 2~4 times the width of the ship and traveling less than 7 knots, crash astern and crash astern & hard rudder showed no significant difference. But ships traveling at 10 knots there was a decrease in breaking distance of 1L, from 3.5L to 2.5L. By analyzing 10 subject ships by crash astern the breaking distance for 5 knots is 0.98L~1.8L, for 8 knots is 1.9L~4.0L. The minimum safe separation distance in narrow sea-ways is 6L, but as the arctic sea-way is only one-way 3L is required. As the result, it is found that in the arctic the safe escort speed is less than 5 knots, if the escort speed is 8knots or more and by using crash astern & hard rudder to break the safe distance should be kept at 3.4L.