• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1414-1415
• /
• 2006

Air-gap type film bulk acoustic wave resonator device using ZnO for piezoelectric layer and sacrifice layer, deposited by RF magnetron sputter with various conditions, fabricated in this study. Also, membrane$(SiO_2)$ and top and bottom electrode(both Al) of piezoelectric layer deposited by RF magnetron sputter. Using micro electro mechanical systems(MEMS) technique, sacrifice layer removed and then air-gap formed. The results of each process checked by XRD, AFM, SEM to obtain good quality device.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.327-333
• /
• 2002

In order to obtain the oxidation layer for SiC MOS, the oxide layers by thermal oxidation process with dry and wet method were deposited and characterized. Deposition temperature for oxidation layer was $1100^{\circ}C$~130$0^{\circ}C$ by $O_2$ and Ar atmosphere. The oxide thickness, surface morphology, and interface characteristic of deposited oxide layers were measurement by ellipsometer, SEM, TEM, AFM, and SIMS. Thickness of oxidation layer was confirmed 50nm and 90nm to with deposition temperature at $1150^{\circ}C$ and $1200{\circ}C$ for dry 4 hours and wet 1 hour, respectively. For the high purity oxidation layer, the necessity of sacrificial oxidation which is etched for the removal of the defeats on the wafer after quickly thermal oxidation was confirmed.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.31-42
• /
• 1999

The effect was investigated that aluminium in the zinc bath has on the coating adhesion of Hot-rolled Galvanized Iron(HGI) manufactured without pickling process. It is thought that the coating adhesion of HGI manufactured without pickling process is good due to the fact that increasing aluminium content in the zinc bath makes zinc and aluminium diffuse to the cracks or pores in the scale formed through the reduction heat treatment, and Fe-Zn-Al compound with good ductility is formed in the scale layer and plays a role of anchor between zinc coating and substrate. It is possible that HGI with the good coating adhesion was produced without pickling treatment in the zinc bath with more that 3wt% of Al content even at the $550^{\circ}C$ of conventional reduction heating temperature. In creasing the temperature of heating section and aluminium content in the zinc bath prevents the Zn-Fe alloy. The corrosion resistance of HGI manufactured without pickling process is excellent because of the mixed reaction of zinc sacrifice and aluminium passivity film.

• Restorative Dentistry and Endodontics
• /
• 제3권1호
• /
• pp.17-21
• /
• 1977

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under calcium hydroxide and formocresol were studied histologically. The class I and V cavities were prepared on the teeth and the pulp was amputated. Calcium hydroxide and formocresol were placed over the amputated tissue and the cavities were sealed with zine oxide eugenol cement and zinc phosphate cement. Animals. were sacrifice after 1, 2, and 3 weeks following the operation. The teeth were decalcfied, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Healing of the pulp at the amputation site did not occur in the pulps treated with formocresol. 2. At one week, a thin layer of darker staining tissues just below the necrotic zone was presented in the pulps treated with formocresol. In this stage the tissues beneath the darker staining layer were normal. 3. At two weeks, the cells of the palest staining layer were showed indistinct nucleus which suggested the karyolysis and the karyorrhexis in the pulps treated with formocoresol. As reached to the middle third of the pulp, the odontoblasts were scarcely evident or missed in this stage. 4. At three weeks, the necrotic zone was reached to the middle third of the pulp canal. The cells beneath the zone showed massive infiltration of inflammatory cells in the pulps treated with formocresol. 5. Dentin bridge in the control group was deposited below the necrotic zone from the two. weeks later. 6. Normal tissues were observed ill the apical third of all. the dental pulps in all case of calcium hydroxide and formocresol.

• Corrosion Science and Technology
• /
• 제8권1호
• /
• pp.15-20
• /
• 2009

Surface of PEEK(poly-ether-ether-ketone) was modified by chemical etching, plasma treatment and mechanical grinding to improve the plating adhesion. The plating characteristics of these samples were studied by the contact angle, plating thickness, gloss and adhesion. Chemical etching and plasma treatment increased wettability, adhesion and gloss. The contact angle of as-received PEEK was $61^{\circ}$. The contact angles of chemical etched, plasma treated or both were improved to the range of $15{\sim}33^{\circ}$. In the case of electroless plating, the thickest layer without blister was $1.6{\mu}m$. The adhesion strengths by chemical etching, plasma treatment or both chemical etching and plasma treatment were $75kgf/cm^2$, $102kgf/cm^2$, $113kgf/cm^2$, respectively, comparing to the $24kgf/cm^2$ of as-received. In the case of mechanically ground PEEKs, the adhesion strengths were higher than those unground, with the sacrifice of surface gloss. The gloss of untreated PEEK were greater than mechanically ground PEEKs. Plating thickness increased linearly with the plating times.

• 대한소아치과학회지
• /
• 제11권1호
• /
• pp.169-179
• /
• 1984

The purpose of this study was to observe the effect of dental varnish applied with fluoride to dental pulp by comparing the groups of commercial fluoride product $Duraphat^{(R)}$, $Copalite^{(R)}$ after 1 Mole sodium fluoride application, Cavity $Sealer^{(R)}$ after 1 Mole sodium fluoride application with the control group not applied the dental varnish. After Cl V Cavity form was prepared on the buccal surface of the crowns with the total 75 teeth by using 5 dogs, average weight of 13.2Kg, dental varnish and silver analgram were placed. This study was performed by 3, 7, 21, 28, 56 days each. The dogs were sacrificed to extract the teeth, cut at the apical one fourth, and prepared histologic examination by fixing with 10% buffered formalin perfusion at sacrifice and decalcification in 10% nitric acid. The specimens were embedded in paraffin, stained with Hematoxylin and Eosin, and serially sectioned with 6 ${\mu}$width each. Microscopic evaluation of serial sections at the various time periods among the different groups revealed the following results: 1. In the control group, the marked change of the odontoblastic layer was showed on the 3 days group, and it was decreased gradually. Healing response, such as hyperplasia, was seen on the 28 days group and it was continued to the 56 days group. 2. In the experimental group with Cavity $Sealer,^{(R)}$ a slight hemorrhage was seen in the odontoblastic layer on the 3 days group, and the healing response with the hyperplasia of the odontoblast was showed on the 21, 28 days group. It was completely healed on the 56 days group. 3. In the Duraphat R group, a slight hemorrhage showed on the 3 days group and the disarrangement of the Odontoblastic layer was seen on the 7, 21, 28 days group. Odontoblasts showed hyperplasia on the 28 days group, and healed completely on the 56 days group. 4. In the $Copalite^{(R)}$ group, the 7 days group showed remarkable hemorrhage in the odontoblastic layer and stroma, and also it showed reticular degeneration with the disarrangement of the odontoblastic layer and congestion. Each group showed disarrangement. Healing ability of this group was greater than that of the control group, but less than that of the $Duraphat^{(R)}$ and Cavity $Sealer^{(R)}$ group.

• 한국컴퓨터그래픽스학회논문지
• /
• 제17권3호
• /
• pp.43-50
• /
• 2011

본 논문에서는 2차원 입력 형상에 대하여 계층 메쉬를 이용한 빠르고, 품질 저하가 적은 평면 형상변형 기법을 제시한다. 입력으로 주어진 2차원형상의 내부와 경계를 조밀하게 샘플링한 정점의 집합으로 구성된 형상 메쉬와, 입력 형상을 근사적으로 둘러싸는 형상 메쉬의 일부 정점으로 구성된 제어 메쉬를 구성한다. 이때, 형상 메쉬 정점은 제어 메쉬의 정점에 대한 평균값 좌표로 표현한다. 사용자의 형상 변형 입력에 대하여 기존의 비선형 최소자승법을 사용한 메쉬 최적화문제를 풀어 제어 메쉬 정점의 변형될 위치를 구하고, 형상 메쉬는 변형된 제어 메쉬의 정점으로부터 평균값 좌표를 이용하여 최종적인 형상의 변형을 빠르게 계산한다. 형상 메쉬는 입력 형상을 정확히 표현하기 위해 많은 수의 정점으로 구성되는 반면에 제어 메쉬는 상대적으로 적은 수의 정점으로 구성된다. 계산양이 많은 최적화 방법은 제어 메쉬에만 적용되기 때문에 전체 수행시간은 매우 빠르지만, 제어 메쉬의 품질저하에 따라 형상변형의 품질 또한 저하된다. 본 논문에서는 형상 변형의 결과를 조절하고 품질 저하를 보정하기 위해서 사용자 제한에 방위 제어를 포함시켜 형상변형의 강성도를 조절하는 방법을 제시한다. 실험적인 결과에 의하면 본 논문에서 제시한 방법은 비교적 적은 수의 정점을 사용하여 형상 변형의 수행속도가 빠르면서, 변형의 시각적인 품질은 부드럽게 유지된다. 본 논문의 결과는 휴대폰이나 타블렛 PC와 같이 계산속도가 느린 임베디드 시스템에서 형상 변형을 이용한 2차원 애니메이션 제작과 같은 응용문제에 효과적으로 사용될 수 있다.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.43-49
• /
• 2005

This paper is to investigate the effect of corrosion by acoustic emission method in tensile loading and the adhesiveness between substrate and coating layer. The powders used are Zn and Amdry625, respectively. They are coated on brass alloy substrate. AE signals of Zn and Amdry625 coating layer increase drastically in strain $2\%$. However, those of Zn specimen have more than those of Amdry625 specimen. When the specimens executed the corrosion test under $3.5\%$ NaCl solution for 500, 1000 hours, the salt solution penetrated into the surface of the substrate through the pores of the coating layer. As a result, corrosion production formed on the surface of the substrate. The adhesiveness between coating layers is weakened by the polarization and corrosion itself. The AE event, count, and energy of corroded coating specimens decrease, compared to specimens without corrosion. The results are summarized as follows : 1. In the tensile tests, the time that it took to start and develop the cracks and exfoliations between the surface of the substrates and the plasma spray coatings were different according to the type of plasma sprayed material, which are Zn and Amdry625. These phenomena were obvious at the strain rate 1 to $5\%$, and few available data were found after that stage. 2. The specimens with Zn coating showed the characteristics of crack, according to the changes of the tensile strength applied on the substrates while those with Amdry625 showed exfoliation as a result of low adaptation to the tensile strength. 3. The anti-corrosion specimens showed that the adhesive properties between the substrate and the plasma spray coating were strong in the order of Zn, Amdry. It showed that Corroded specimens cracked or exfoliated easily, even with the small energy, because those had a comparatively weakened adhesive property, due to corrosion. 4. Zn specimen showed no corrosion phenomena on the surface of the substrates, because they had the function of sacrifice anode however, Amdry625 specimen showed the corrosion, because it did not have that function.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권4호
• /
• pp.1333-1340
• /
• 2012

Epithelial ovarian cancer represents the most lethal gynecological cancer, and the high mortality rate makes this malignancy a major health concern. Poor prognosis results from an inability to detect ovarian cancers at an early, curable stage, as well as from the lack of an effective therapy. Thus, effective and novel strategies for prevention and treatment with non-toxic agents merit serious consideration. Resveratrol, obtained from grapes, berries, peanuts and red wine, has been shown to have a potent growth-inhibitory effect against various human cancer cells as well as in in vivo preclinical cancer models. The objective here was to evaluate potential antitumor effects of resveratrol in both in vitro and in vivo NuTu-19 ovarian cancer models. In vitro an invasion assay was performed. After 48 h, the numbers of viable cells that invaded the extracellular matrix layer were reduced by 94% with resveratrol in comparison to control. For the in vivo anti-tumor assessment, 10 rats were injected with NuTu-19 cells into the ovarian bursa. Thereafter, half were provided with a diet mixed with a dose of 100 mg resveratrol/kg body weight/day for 28 days. Following sacrifice, anticancer effects were assessed by histological evaluation of ovarian as well as surrounding tissues, and immunohistochemical detection of cell proliferation and apoptosis, but there were no observable differences between the control and resveratrol-treated groups for any of the biological endpoints. While resveratrol is effective in suppressing the in vitro cellular invasion of NuTu-19 ovarian cancer cells, these effects do not appear to impact on in vivo NuTu-19 ovarian cancers in rats.