• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2015

Ceramic ink-jet printing technology in art tiles, decorated tablewares and other porcelain products has many advantages of fast and precision printing of various images with high efficiency and low cost. For the application to ink-jet printing, ceramic ink requires a stable dispersibility with nano-sized pigments. In this paper, characteristics of pink-red aqueous ceramic ink for ink-jet printing was demonstrated. $CaCr_{0.1}Sn_{0.8}SiO_5$ pigment was synthesized using solid state reaction and deagglomerated using attrition milling. The aqueous ceramic ink contains 10 wt% of the obtained $CaCr_{0.1}Sn_{0.8}SiO_5$ nanopigment with 0.4 wt% of sodium dodecyl sulfate (SDS) as a dispersion agent. Viscosity of $CaCr_{0.1}Sn_{0.8}SiO_5$ aqueous ceramic ink was adjusted using 0.18 wt% of polyvinyl alcohol (PVA) for a suitable jetting from the nozzle. The prepared pink-red ceramic ink showed a good jetting property with formation of a single sphere-shaped droplet after $180{\mu}s$ without a tail and satellite droplet.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.82-89
• /
• 2009

Recently, the study is progressing actively about manufacture skill of concrete for promoted recycled aggregate and concrete made into recycled aggregate in the construction production field. But, application and study about recycled fine aggregate insufficient compared to recycled coarse aggregate. So, in this study, it presents basic data for development of environmental load reduction fiber reinforcement recycled fine aggregate concrete by comparison and investigation about engineering properties and shrinkage cracking of fiber reinforcement recycled find aggregate concrete for increasing shrinkage cracking reduction and long term stability of environmental load reduction concrete used recycled fine aggregate. In the result of the study, compared to natural fine aggregate, a crack-extent increased by applying recycled fine aggregate, moreover, as a water cement ratio increased, the crack size increased, as well. In addition, it's shown that the specimen mixed with PVA and Nylon, among all kinds of fibers, showed the smallest crack size, so it's verified that the mix of fiber had an effect on decreasing crack-extent.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.299-304
• /
• 2021

This study focuses on the preparation of acetaminophen (AP) imprinted functional biomaterials for a transdermal drug delivery using mung bean starch (MBS), polyvinyl alcohol (PVA), sodium benzoate (S) as a crosslinking agent, glycerol (GL) as a plasticizer, and melanin (MEL) as a photothermal agent. The prepared AP imprinted biomaterials were characterized using FE-SEM and their physical properties were evaluated. The photothermal effect and AP release property for functional biomaterials were examined with the irradiation of near infrared (NIR) laser (1.5 W/cm²). When the NIR laser was irradiated on functional biomaterials with/without the addition of MEL, the temperature of MEL added biomaterial increased from 25 ℃ to 41 ℃, whereas the biomaterial without MEL increased from 25 ℃ to 28 ℃. Results indicate that there is the photothermal effect of prepared biomaterial with the addition of MEL. Based on the results, AP release properties were evaluated using standard buffer solutions and artificial skin. It was found that AP release rates of MEL added AP loaded biomaterials were 1.2 times faster than those of MEL non-added AP loaded biomaterials when irradiating with NIR laser. We envision that the developed functional biomaterials can be utilized for an acute pain-killing treatment.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.223-226
• /
• 1995

Polymers have been developed and applied in many biomedical areas as well as engineering and industrial fields. The first essential to achieve successful development and applications is that properties of such polymer materials would be investigated. In many cases, such investigations are accomplished by observing polymeric behavior arising from the environmental changes such as pH, temperature, and ionic concentration. It has long been known that NMR is extremely sensitive to many biochemical and physical changes occurring in the polymer samples. In the present study we focus our study on NMR Microimaging, which is one of the important NMR applications, to characterize the swelling effect by observing the time dependent spatial variations of polymer specimens. For the samples three kinds of polyvinyl alcohol (PVA) specimens are prepared with different degrees of cross linking density. $^1H$ NMR microimages are acquired as a function of time to visualize the swelling behavior as well as volumetric changes occurring in the specimens. From the acquired time dependent images, the swelling process is exploited.

• Clean Technology
• /
• v.12 no.3
• /
• pp.165-170
• /
• 2006

When ammonia ($NH_3$) and hydrogen sulfide ($H_2S$) in binary mixture gases were supplied to a biofilter packed with biomedia made of polyurethane, PVA, and worm cast. No odor gases were detected on the outlet of the biofilter when $NH_3$ and $H_2S$ were separately supplied to the biofilter at space velocity(SV) of $50h^{-1}$ until inlet $NH_3$ concentration was increased up to 300 ppmv and inlet $H_2S$ to 428 ppmv. While, inlet $NH_3$ concentration maintained at 50 ppmv, inlet $H_2S$ concentration increased from 1 to 489 ppmv, and the removal efficiency of each gas was investigated. After that, $NH_3$ concentration increased step by step such as 80, 100, 200, 300, 400 and 500 ppmv. $H_2S$ concentration increased gradually when $NH_3$ concentration was set up at each condition. Under each condition, removal efficiency of $NH_3$ and $H_2S$ gas was investigated by analysing the gases sampled from the inlet and outlet of the biofilter. When binary gases were supplied to the biofilter and inlet $NH_3$ concentration was increased from 50 to 300 ppmv, elimination capacity of $NH_3$ increase linearly as inlet loading increased to $11.14g\;N{\cdot}m^{-3}{\cdot}h^{-1}$. However, as inlet $NH_3$ concentration increased over 300 ppmv, both removal efficiency and elimination capacity decreased while inlet loading increased. $H_2S$ removal efficiency was not affected seriously by the simultaneous supply of $NH_3$ when maximum inlet loading of $H_2S$ was under $40.27S{\cdot}m^{-3}{\cdot}h^{-1}$ and maximum inlet loading of $NH_3$ was under $15.25N{\cdot}m^{-3}{\cdot}h^{-1}$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.126-126
• /
• 2018

최근 차세대 디스플레이인 flexible 하고 transparent 한 디스플레이 개발이 진행 중 이며, 이러한 디스플레이가 개발 되기 위해 백 플레인으로 사용되는 Thin Film Transistor (TFT) 또한 차세대 디스플레이 못지 않게 연구가 진행 되고 있다. 기존의 무기물을 기반으로 하고 Rigid한 TFT는 현재 많은 곳에 적용이 되어 사람들이 사용 하고 있다. 하지만 이미 시장은 포화상태이며 차세대 디스플레이 컨셉인 flexible 하고 투명한 것과 맞지 않는다. 그래서 유연하며 투명한 특성을 가진 TFT에 대한 연구가 활발히 진행 되고 있으며 많은 성과를 이루었다. 이러한 소자를 이용하여 훗날 Electronic-skin(e-skin)이라 부르는 전자 피부를 활용하여 실시간 모니터링 할 수 있는 헬스 케어 분야 등에 활용 가치 또한 높다. 현재 유연하며 투명한 기판 및 물질 개발에 많은 연구 개발이 진행 되고 있다. 하지만 유연한 기판을 사용하여 TFT를 제작한 후 stress나 bending에 대한 내구성과 안정성, 신뢰성 등이 무기물을 기반으로 한 TFT에 비해 좋지 않은 실정이다. 따라서 유연하며 투명한 기판을 사용한 TFT에 대한 안정성, 신뢰성 등을 확보하여야 한다. 본 연구 에서는 유연한 기판을 사용하여 TFT를 제작 한 후, TFT특성과 안정성을 확보하는 것을 목표로 실험을 진행하였다. 우리는 Mo전극과 Parylene 기판을 사용하여 유연한 TFT소자를 탑 게이트 구조로 제작 하였고 Rigid한 Glass기판 위에 Floating Process를 진행하기 위해 PVA층을 코팅 후 그 위에 Parylene을 CVD로 증착 하고 IGZO를 Sputter를 사용해 증착했다. Parylene은 DI Water 70도에서 Floating 공정을 통해 Rigid 기판에서 탈착 시켰다. 유연한 기판 위에 TFT를 제작 후 bending에 대한 특성 변화 및 안정성에 대한 측정을 실시하였다. Bending에 대한 특성 변화는 우수한 결과가 나왔지만 안정성 측정 중 Negative Bias Stress(NBS) 상에서 비정상적인 On Current Drop 현상이 발생 되었다. Parylene과 Channel층 사이 interface roughness로 인해 charge trap이 되고 이로 인해 On Current Drop 이라는 현상으로 나타났다. 그래서 우리는 Parylene 기판과 Channel 층간의 surface roughness를 개선하기 위한 방법으로 UV Treatment를 사용하였고 시간을 다르게 하여 surface 개선을 진행했다. Treatment 시간을 증가 시킴에 따라 Surface roughness가 많이 좋아 졌으며, Surface를 개선하고자 비정상적인 On Current Drop 현상이 없어졌으며 위 실험으로 Polymer의 surface roughness에 따라 TFT에 대한 안정성에 대한 신뢰성이 확보 될 수 있는 것을 확인 하였다.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.123-123
• /
• 2003

This study was conducted to determine the ability of nuclear development of canine oocytes depend on the kind of maturation media and addition of serum sources. Ovaries were collected from a bitches at various stages of estrus cycle by an ovariohysterectomy. Oocytes were collected of cumulus oocytes complexes after slicing of ovaries with blade. The maturation medium was containing 0.6 mM/ml cysteine, 0.2 mM pyruvic acid, 20 ng/ml $E_2$ and 1 $\mu g/ml$ rbST Exp. 1, the oocytes were matured in four different maturation medium as follows: 1) TCM-199, 2) DMEM, 3) NCSU37 and 4) modified-NCSU37 with 10% FBS. Exp. 2: the oocytes were matured in mNCSU37 supplemented with different protein sources (10% FBS, 10% EDS, 0.3% BSA and 0.1% PVA) to select the optimal one. Oocytes were matured in a humidified atmosphere containing 5% $CO_2$ at $39{\circ}C$ for 72 hrs. The maturation rate were analyzed by Duncan's multiple range test using General Linear Models procedure in SAS. The rates of meiotic resumption to MI-MII depend on different culture media were achieved with TCM-199 (5.2%), DMEM (5.0%), NCSU37 (7.2%) and m-NCSU37 (5.9%), respectively. The rates of meiotic resumption to MI-MII according to addition of protein source were 10% FBS (13.3%), 10% EDS (25.0%), 0.3% BSA (25.0%) and 0.1% PVA (15.4%), respectively. In conclusion, the results obtained showed that in vitro maturation media and protein supplement to m-NCSU37 culture medium tested did not promote the final steps of IVM in canine oocytes.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.3-14
• /
• 2012

This paper describes experimental results on the seismic performance of SHCC (strain-hardening cement composite) infill wall for improving damage tolerance capacity of non-ductile frame. To investigate the effect of tensile strain capacity and cracking behavior of SHCC materials on the shear behavior of SHCC infill wall, three infill walls were fabricated and tested under cyclic loading. The test parameter in this study is a type of cement composites; concrete and SHCCs. The two types of SHCC materials were prepared for infill walls. In order to induce crack damages into the mid-span of the infill wall, each infill wall had two 100-mm-deep-notches on both sides. Test results indicated that SHCC infill walls showed superior crack control capacities and much larger drift ratios at the peak loads than RC (reinforced concrete) infill wall, as expected. In particular, due to the bridging actions of the reinforcing fibers, SHCC matrix used in this study would delay the stiffness degradation of infill wall after the first inclined cracking. Moreover, from the damage classes based on the cracks' maximum width in the infill walls, it was observed that PIW-SHD specimen possessed nearly threefold seismic capacities compared to PIW-SLD specimen. Also, from the results on the strain of diagonal reinforcements, it can be concluded that the SHCC matrix would resist a part of tensile stresses transferred along steel rebar in the infill wall.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.583-590
• /
• 1996

The purpose of this study was to evaluate some factors in the bovine embryonic development from one-cell to blastocyst using modified synthetic oviduct fluid medium (mSOFM), after maturation and in vitro fertilization of the oocytes. The embryonic development to the blastocyst stage was assessed at 7-10 days after in vitro fertilization, and the total cells in the blastocysts were counted by staining nuclei with fluorochrome. Some commercial calf sera (CS) and a superovulated cow serum had different effects on the embryonic development to the blastocyst stage (8.6-21.4%), dependent upon their product lots, although the development might not be affected at least by serum progesterone levels. ${\beta}$-Mercaptoethanol (${\beta}$-ME) supplemented into mSOFM was effective to the embryonic development (27.8%), as well as the co-culture system with cumulus cells (19.5%). In a serum- and feeder cell-free culture using mSOFM containing several growth factors and ${\beta}$-ME instead of CS plus co-cultured cumulus cells, bovine serum albumin (BSA, fraction V), but not polyvinyl alcohol (PVA), was highly effective in embryonic development to the blastocyst stage, almost comparable to CS in the serum-contained culture (CS, BSA and PVA; 27.8, 19.5 and 5.7%, respectively). However, fatty acid free BSA rather reduced the number of developed blastocysts, compared with fraction V BSA (7.3 vs 29.4%). In the serum- and feeder cell-free culture, supplement of glucose to the medium (final 2.0 mM) stimulated the cell proliferation of developing embryos 120 hr after in vitro fertilization. These results indicated that a serum-free medium supplemented with ${\beta}$-ME could successfully support the development of bovine one-cell embryos to the blastocyst stage. Moreover, supplement of glucose and fatty acids to the medium might support preferably the development and cell proliferation of embryos.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2003

Three experiments were performed to develop an optimal culture system of in-vitro derived porcine embryos. In experiment 1, embryos were cultured in two different basic culture media (NCSU-23 and PZH) supplemented with BSA (4mg/ml), FBS (10%), PVA (3mg/ml). Although no difference on the percentage of embryos developed to blastocysts was found (P>0.05), more 2-cell embryos (59.5% vs. 44.7 to 52.0%) were obtained when embryos were cultured in NCSU-23 added with BSA. In experiment 2, identical treatment was conducted using PZM medium. More (P<0.05) 2-cell embryos (54.4% vs. 40.7 to 44.5%) and blastocysts (12.5% vs. 5.8 to 9.0) were produced when embryos were cultured in PZM added with BSA (4mg/ml). In experiment 3, embryos were cultured in media as follows; 1) NCSU-23 without BSA for 192 hours; 2) NCSU-23 with BSA for 192 hours; 3) NCSU-23 with BSA for 96 h and then subsequently injected with FBS into culture drops. Although no difference on the percentage of embryos developed to blastocysts was found (P>0.05), more 2-cell embryos (63.8 to 69.2% vs. 52.0%) were obtained when embryos were cultured both in NCSU-23 added with BSA throughout culture duration and in FBS supplemented medium. In conclusion, no difference was found when porcine preimplantation embryos were cultured in NCSU-23 added with various macromolecules. However, when PZM medium was used, PZM medium supplemented with BSA showed more potential to support embryo development. Finally, FBS supplemented into culture drop 96h post-insemination did not show any benefits on embryo development.