• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.105-108
• /
• 2006

It has been issued to fabricate nano-scale patterns with large-scale in the field of digital display. Also, large-scale fabrication technology of nano pattern is very important not only for the field of digital display but also for the most of applications of the nano-scale patterns in the view of the productivity. Among the fabrication technologies, UV nano imprinting process is suitable for replicating polymeric nano-scale patterns. However, in case of conventional UV nano imprinting process using flat mold, it is not easy to replicate large areal nano patterns. Because there are several problems such as releasing, uniformity of the replica, mold fabrication and so on. In this study, to overcome the limitation of the conventional UV nano imprinting process, we proposed a continuous UV nano imprinting process using a pattern roll stamper. A pattern roll stamper that has nano-scale patterns was fabricated by attaching thin metal stamper to a roll base. A continuous UV nano imprinting system was designed and constructed. As practical examples of the process, various nano patterns with pattern size of 500, 150 and 50nm were fabricated. Finally, geometrical properties of imprinted nano patterns were measured and analyzed.

• Journal of Integrative Natural Science
• /
• v.8 no.2
• /
• pp.128-134
• /
• 2015

This paper focuses on the applicability of a continuous monitoring method on trace sulfur compounds in the ambient air by TD and GC/PFPD. The target compounds for monitoring include H2S(hydrogen sulfide), Methyl mercaptan, Dimethyl Sulfide, and Dimethyl disulfide. The result of QA/QC on monitoring instruments satisfies all the standards of Odor Measurement and Analysis Method, showing that the reproductivity of the compounds by concentration is within 10%, linearity is above 0.98 of a correlation efficient, method detection limit is 0.16 ppb by MM standard, and recovery rate is over 70%. Monitoring was conducted for two years from March 2006 to February 2008. As a result of the monitoring, the average concentration of H2S was 0.08 ppb, with the maximum concentration at 16.15 ppb. The result indicates that it is reasonable to do continuous monitoring as there appears a spontaneous event of high concentration by the condition of the site during monitoring odor-causing substances. Therefore, it is suggested that the continuous monitoring method used in this paper is appropriate to identify the characteristics of sudden occurrence and concentration variations of sulfur compounds.

• Journal of Information Processing Systems
• /
• v.11 no.1
• /
• pp.39-56
• /
• 2015

Continuous multi-interval prediction (CMIP) is used to continuously predict the trend of a data stream based on various intervals simultaneously. The continuous integrated hierarchical temporal memory (CIHTM) network performs well in CMIP. However, it is not suitable for CMIP in real-time mode, especially when the number of prediction intervals is increased. In this paper, we propose a real-time integrated hierarchical temporal memory (RIHTM) network by introducing a new type of node, which is called a Zeta1FirstSpecializedQueueNode (ZFSQNode), for the real-time continuous multi-interval prediction (RCMIP) of data streams. The ZFSQNode is constructed by using a specialized circular queue (sQUEUE) together with the modules of original hierarchical temporal memory (HTM) nodes. By using a simple structure and the easy operation characteristics of the sQUEUE, entire prediction operations are integrated in the ZFSQNode. In particular, we employed only one ZFSQNode in each level of the RIHTM network during the prediction stage to generate different intervals of prediction results. The RIHTM network efficiently reduces the response time. Our performance evaluation showed that the RIHTM was satisfied to continuously predict the trend of data streams with multi-intervals in the real-time mode.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.9
• /
• pp.1533-1537
• /
• 2007

In this study, in order to develop a continuous production process of lactosucrose in a packed-bed reactor, Sterigmatomyces elviae ATCC 18894 was selected and mutated. The mutant strain of S. elviae showed 54.3% higher lactosucrose production than the wild type. Reaction conditions such as temperature, pH, substrate concentration and flow rate were also optimized. Under optimized reaction conditions ($50^{\circ}C$, pH 6.0, 25% sucrose and 25% lactose as substrate, flow rate 1.2 ml/min), the maximum concentration of lactosucrose (192 g/l) was obtained. In a packed-bed reactor, continuous production of lactosucrose was performed using S. elviae mutant immobilized in calcium alginate, and about 180 g/l of lactosucrose production was achieved for 48 days.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.689-706
• /
• 2016

Purpose: This study identifies causality in IoT-based healthcare user's experience(playful experience, economical experience), trust, usage, degree of dependence and continuous use intention, especially focused on chinese case. Methods: Face to face interviews was conducted for people who has experience in the use of the Xiaomi Mi band. This study used Partial Least Square(PLS) method with the questionnaires from the interview. Results: IoT-based healthcare users taking playful experience have a strong trust in a positive economic experiences. Also, the user recognizing the experience as an economic one shows stronger intention to use continuously. Conclusion: By getting healthcare users have more economic experience, they have continuous use intention of healthcare product. The empirical findings can be applied to the related companies strategy building.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.6
• /
• pp.47-58
• /
• 2004

As concrete structures are getting larger, higher, longer and more specialized, it is more required to develop steel fiber concrete and apply to the real world. In this research, it is aimed to have fatigue strength examined, varying the steel fiber content of 0%, 0.75%, 1.00%, 1.25% by experimental study of fatigue behavior of the steel fiber reinforced concrete continuous beams under cyclic loading. The ultimate load and initial load of flexural cracking were measured by static test. In addition, the load versus strain relation, load versus deflection relation, crack pattern and fracture mode by increasing weight were observed. On the other hand, the crack propagation and the modes of fracture according to cycle number and the relation of cyclic loading to deflection relation and strain relation were investigated by fatigue test. As the result of fatigue test, continuous beam without steel fiber was failed at 60 ~ 70% of The static ultimate strength and it could be concluded that fatigue strength to two million cyclic loading was arround 67.2% by S-N curve. On the other hand, that with steel fiber was failed at 65 ~ 85% of the static ultimate strength and it could be concluded fatigue strength to two million cyclic loading around 71.7%.

• The Journal of Information Systems
• /
• v.25 no.1
• /
• pp.201-223
• /
• 2016

Purpose As social network games (SNG) enjoy rapid growth in the market and become a major sector of the gaming industry, it is of great interest to examine the how users continuously use SNG. In SNG, the users' social interaction is the most prominent advantage of the social network, as well as the entertainment afforded by the game. This study explores the relationship between altruism, which is considered the most prominent characteristic of SNS, and the continuance usage intention, as well as the moderating role of social capital. Based on social capital theory and organizational citizenship behavior, this research model considers social bonding and bridging that are divided by social capital. Design/methodology/approach An AMOS analysis based on survey data from 223 SNG users indicated that SNG with greater altruism enhance social capital (social bonding, social bridging), which is related to the user's satisfaction and the continuance intention of SNG. Findings Social bonding is positively related to the user's satisfaction with SNG. In other words, social bridging positively affects the continuous usage intention of SNG. These findings help managers in developing and implementing altruistic relationships and social capital for continuous usage of SNG.

• Design & Manufacturing
• /
• v.10 no.2
• /
• pp.44-49
• /
• 2016

The roll forming produces mass products using the continuous production process. Also we need the process that continuous long material or goods cutting into a desired length. Our study uses 3-D driving cutter and roll forming material as SPCC to investigate this. When we cut the material using the process of roll forming, the shear resistance is raised at the cutting punch's edge. The result is remained the trouble about burr and progressive deformation on the material. This study shows the method minimizing the above trouble. The material of punch was considering heat generated on the continuous production process. So we used the type of STD 61 for the material of punch and had the vacuum heat treatment for the surface hardness of HRC 53. The structure of the mold is designed with forming a double cam die at the upper punch and the both sides of central core. We conducted the experiment three times. In the result when had to make V-groove within the angle between 105 and 110 on the punch front end, we could get the minimum shear resistance on the punch front end. Also with the same condition we minimizes the material jams in the continuous production process.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.93-103
• /
• 2022

This study investigated the method of continuous improvement of small-medium company production processes through POSCO's QSS(Quick Six Sigma) activities. QSS is a field operation technique that encompasses the advantages of Six Sigma, TPS(Toyota Production System), TQM (Total Quality Management), and IE(Industrial Engineering). Through this, POSCO not only encourages activities centered on related small and medium-sized partners, etc., but is also expected to contribute to the continuous improvement of the company's own production process through QSS activities. In this study, rather than unconditionally carrying out activities according to the needs of large companies, the research is to help the continuous improvement of the actual production process of small and medium-sized enterprises by effectively applying and spreading QSS activities in consideration of the characteristics and environment of the company. For this purpose, empirical research is conducted on the process improvement activities and QSS activities of company Y, which has less than 100 assembly and production quality and inspection processes among SMEs. The changes in the production process improvement of SMEs through the application of the final QSS were investigated through empirical studies.

• Transactions of Materials Processing
• /
• v.32 no.1
• /
• pp.28-34
• /
• 2023

In this research, a representative volume element (RVE)-based FE Model is presented to estimate the mechanical properties of additively manufactured continuous fiber-reinforced composites with different fiber orientations. To construct the model, an ABAQUS Python script has been implemented to produce matrix and fiber in the desired orientations at the RVE. A script has also been developed to apply the periodic boundary conditions to the RVE. Experimental tests were conducted to validate the numerical models. Tensile specimens with the fiber directions aligned in the 0, 45, and 90 degrees to the loading direction were manufactured using a continuous fiber 3D printer and tensile tests were performed in the three directions. Tensile tests were also simulated using the RVE models. The predicted Young's moduli compared well with the measurements: the Young's modulus prediction accuracy values were 83.73, 97.70, and 92.92 percent for the specimens in the 0, 45, and 90 degrees, respectively. The proposed method with periodic boundary conditions precisely evaluated the elastic properties of additively manufactured continuous fiber-reinforced composites with complex microstructures.