• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2006

This paper was studied for optimum design of the used vaporizer at a satellite station. Generally, the cold air is created by temperature drop on the vaporizer surface. In addition, the frost creates ice deposit layer, therefore, heat transfer on vaporizer decreases into the adiabatic condition. By this reason, recent vaporizer system is installed as parallel type, and it takes three times of vaporizer capacity. But this vaporizer system requires much installation costs and restricted by some space. It is very important to solve this problem. This study paper is regarding $LN_2$ vaporizer where the utilization increases recently. There are three variable conditions which are used in this study research. First, fin lengths of 4000mm, 6000mm, 8000mm and 0, 4, 8 fin types were applied rut each vaporizer. Second, we applied four season condition which consist of humidity, temperature and air velocity to the experimental environment. Finally, pressure was applied to get flow rate during experiment. This paper objective is to propose vaporizer type and length data for best performance of vaporizer through experiment.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.51-60
• /
• 2003

One of the most important matters in designing network and realizing service, is to grip on the traffic characteristics. Conventional traffic prediction and analysis used the models which based on the Poisson or Markovian. Recently, experimental research on the LAN, WAN and VBR traffic properties have been pointed rut that they weren't able to display actual real traffic specificities because the models based on the Poisson assumption had been underestimated the long range dependency of network traffic and self-similar peculiarities, it has been lately presented that the new approach method using self-similarity characteristics as similar as the real traffic models. Therefore, in this paper, we generated self-similar data traffic like real traffic as background load. On the existing ABR congestion control algorithm, we analyzed by classify into ACR, buffer utilization. cell drop rate, transmission throughput with the representative EFCI, ERICA, EPRCA and NIST twitch algorithm to show the efficient reaction about the burst traffic.

• Korean Journal of Pharmacognosy
• /
• v.40 no.1
• /
• pp.1-5
• /
• 2009

The antioxidant and anti-diabetes effects were evaluated by the ethanol extracts from Astragalus membranaceus root classified by years using through DPPH radical scavenging activity, hydroxyl radical (${\cdot}OH$) scavenging activity, total phenolic and flavonoid contents, reducing power activity, $\alpha$-amylase and $\alpha$-glucosidase inhibitory activities. $IC_{50}$ values for DPPH radical scavenging activity of ethanol extract from 6 years old root ($749.25{\mu}g/mL$) was higher than 1 year ($1452.67{\mu}g/mL$) and 3 years old root ($1095.61{\mu}g/mL$). 6 years old root showed better effects in ${\cdot}OH$ scavenging activity ($IC_{50}$: $10.58{\mu}g/mL$), reducing power, total phenolic contents ($26.13{\pm}0.79\;Tan\;{\mu}g/mg$, $24.03{\pm}0.74\;Cat\;{\mu}g/mg$) $\alpha$-amylase ($33.33{\pm}0.55%$) and $\alpha$-glucosidase inhibitory activity ($49.71{\pm}1.01%$). On the other hand, total flavonoid compound contents were estimated much higher in 1 year old root ($44.93{\pm}1.35\;Que\;{\mu}g/mg$, $70.32{\pm}2.03\;Rut\;{\mu}g/mg$) than others. Based on these results, It was suggested that 6 years old root of A. membranaceus has a potential candidate for functional cosmetic and medicine.

• Journal of the Korean Dietetic Association
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2006

The purpose of this study was to examine the correlation between nutrient intakes and bone mineral density in female university students. A total 27 female university students were measured the anthropometric characteristics, dietary intake and the bone mineral density of carpus using DEXA. The average age, height, weight, % body fat, WHR, and BMI of the subjects were 22.7 years, 161.5 cm, 57.0 kg, 29.9%, 0.8, 21.8 kg/$m^2$, respectively. Bone mineral density of ultradis and distal carpus as T-value were -1.5 and -0.4, respectively. The daily energy intake of the subjects was 1589.0kcal. And the intakes of energy, calcium, iron, zinc, vitamin $B_2$, and folic acid did not meet the Korean RDAs. The daily total food intake of the subjects was 1011.0g and food intake from cereals and vegetables was high. The major food groups of mineral intake were vegetables/cereals/milks/fishes for calcium, cereals/meat/vegetables/fishes for phosphorus, cereals/vegetables/meats for iron, seasonings/vegetables/cereals for sodium, vegetables/cereals/seasonings for potassium, and cereals/meats for zinc. The body weight and body mass index were significantly positive correlated to the bone mineral density of average carpus, respectively. The intakes of animal calcium and vitamin $B_2$ were significantly negative correlated to the bone mineral density of average carpus, respectively. In conclusion, bone mineral density in carpus and nutrient intakes of some female university students were low. Therefore, health management and the study on relation between bone mineral density in various site and long-term intakes of nutrients in many subjects are required.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.287-296
• /
• 2009

This is written to present basic shot information among iron clubs and information of weight shift, because previous study conducted on all clubs was rut enough. This article is about shot analysis of iron club 3,4,5,6,7,8,9 and weight movement, conducted on four skilled golf players and four students who major in golf and are less than three years. The analysis of long and short irons showed statistically meaningful different results for all the participants but iron clubs of 3,4,5 didn't in head speed and ball speed. The skilled group showed better results in head speed, ball speed and direction, Launch angle than the unskilled group. In weight shift movement analysis, the unskilled group moved, on back swing top, their more weight(65.36%) but the skilled group was on their left foot (70.21%)when clubs were on impact moment. It shows that the skilled group put on power more efficiently by moving weight.

• International Journal of Highway Engineering
• /
• v.1 no.2
• /
• pp.155-168
• /
• 1999

Asphalt pavement tends to rut in high temperature and to crack in cold temperature. The performance of asphalt pavement can be deteriorated by korean weather condition which has the four distinct seasons. In this study, the typical sections that may minimize rutting and fatigue were analyzed through the numerical model tests. The layered elastic theory , finite element method and visco elastic theory were utilized for these numerical model tests. From the various numerical model tests, it is found that an optimum design procedure was recommended. It was increasing the thickness of asphalt stabilized base with fixing the wearing course as 5cm the minimum specified thickness. The section was most beneficial in resting rutting and fatigue. From the analysis of the relative index on tensile strain and cost analysis, it was recommended that the thickness ratio of subbase and asphalt concrete is 1.0$\sim$2.5.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.101-111
• /
• 2000

Resource managing is very difficult because the multimedia data compressed by a VBR shows a bit rate change within high range, Therefore, the VOD server should use the prefetch method in order to improve system utilization, such as prefetching data in the overload period by a meta table that is the reference pattern of MPEG data which is analyzed off line. This prefetch method will not result in a failure to display at overload, however, this method can not keep a minimum loading time and low costs, because the prefetched section is being maximizes. In this paper, we suggest another method that the system utilization can be improved using the fixed prefetched section to keep loading time and costs under a constant range at overload. But this technique will result in a failure to display, due to fixed prefetched section. Rut, in this paper we suggest a drop module that drops only the B frame in the GOP, consistently distributes a lower drop in media quality for the user.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.265-275
• /
• 2009

Due to the limitation of construction efficiency and structural safety, the application of the high covering and wide width tunnels was limited prior to the introduction of precast rut and cover tunnels. Therefore, a cut and cover tunnel structure with rib reinforcement is proposed to mechanically improve the safety on condition of high covering and wide width tunnel. Therefore, a technical problem that can provide a response similar to the actual filling conditions is analyzed by the finite element analyses, moreover, the mechanical behaviour of developed rib-reinforced precast tunnel liner through a large-sized model test will be investigated. The ultimate load of the developed rib-reinforced precast tunnel liner shows a 3% reduction compared to existing rib-reinforced precast tunnel liner, especially, the section of rib-reinforcement decreased to 55% compared to it of existing. Therefore, the stability of tunnel structure can be significantly improved through the developed rib-reinforced precast segment.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.17-23
• /
• 2010

Since the relatively stiff binder shows a higher tensile strength as well as higher rutting resistance, it is believed that the binder stiffness is an important factor for rutting and tensile strength of asphalt mixtures. The typical tensile property is measured by indirect tensile strength (ITS) test at $25^{\circ}C$ and the rutting resistance is most widely measured by wheel tracking (WT) test at $60^{\circ}C$. The deformation strength ($S_D$) is newly developed property to estimate rut resistance of asphalt concretes at $60^{\circ}C$. The ITS and $S_D$ are very simple to measure by static test techniques, but the WT is measured by repeated loading procedure which requires relatively longer time and more efforts. Since these three properties are highly dependent upon the binder stiffness, it may be possible to estimate one property from another. Therefore, this study investigate the possibility of estimating the rutting characteristics (measured by WT test) by ITS or $S_D$ test, and the ITS by $S_D$. Because of binder stiffness effect, in the WT estimation by ITS, a tendency was observed for the higher ITS mixture to have the lower rut depth, giving $R^2{\fallingdotseq}$0.6, on the average. The ITS estimation by $S_D$ showed $R^2{\fallingdotseq}$0.64, and the WT estimation by SD showed $R^2{\fallingdotseq}$0.84, which is highest correlation among the three. Therefore, it was concluded that there is relatively good possibility of estimating WT result by $S_D$, and even though $R^2$ is somewhat low, there is some correlation between WT and ITS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.207-210
• /
• 2004

Vitamin E, consisting of tocotrienols ($\textrm{T}_3$) and tocopherols ($\textrm{T}$) is well-known nutraceutical compound for its antioxidant, anticancer and cholesterol-low-ering activity. The contents of alpha ($\alpha\textrm{-}$), beta ($\beta\textrm{-}$), gamma ($\gamma\textrm{-}$) and delta ($\delta\textrm{-}$) tocotrienols and tocopheyols in some Korean crop seeds were evaluated by using HPLC after saponification. Among tested crops, total 73 contents (mg/110g) were purple perilla 25.06, barley 4.50, corn 3.54, iris 3.04, adlay 2.58, safflower 0.12. Other crops including 5 soybean cultivars, kidneybean, sunflower and perilla contained no tocotrienols. Regarding $\textrm{T}_3$ isomers, $\beta\textrm{-}$$\textrm{T}_3$ were rut observed in adlay and corn, and $\delta$-$\textrm{T}_3$ were not in iris aid purple perilla, while safflower exhibited no detectable $\alpha\textrm{-}$, $\beta\textrm{-}$ and $\delta\textrm{-}$$\textrm{T}_3$. Total T contents (mg/100g) were high in iris (51.82), perilla (40.90), soybean (34.11), sunflower (20.88), and they all contained all $\alpha\textrm{-}$, $\beta\textrm{-}$, $\gamma\textrm{-}$ and $\delta\textrm{-}$ tocopterol isomers. Total Vit E contents (T ＋ $\textrm{T}_3$, mg/100g) were iris 54.86, purple perilla 41.80, perilla 40.90, soybean 34.11, sunflower 20.88, safflower 14.73, corn 11.49, evening-primrose 10.07, barley 7.48, adlay 6.24 and kidneybean 5.27.