• Journal of Applied Biological Chemistry
• /
• 제62권3호
• /
• pp.293-297
• /
• 2019

Leaf rust is the most widespread and destructive fungal disease, and outbreaks have always caused considerable losses in wheat yields. Thus, worldwide increases in wheat production depend on the development of leaf rust-resistant wheat varieties. In this study, we evaluated the resistance of forty Korean wheat cultivars to leaf rust at the seedling stage. Only two Korean wheats, Ol and Jonong, were resistant to leaf rust, whereas the remaining thirty-eight Korean wheats were susceptible to leaf rust. The Ol and Jonong varieties presented larger dry seed weights and higher antioxidant activity in response to leaf rust than the susceptible wheat varieties. No differences in ${\beta}$-1,3-glucanase activity or chlorophyll content between resistant and susceptible wheat varieties were observed. Overall, these results are important for the development of wheat varieties that are highly resistant to leaf rust and to understand the underlying mechanisms that confer leaf rust resistance.

• The Plant Pathology Journal
• /
• 제31권4호
• /
• pp.402-413
• /
• 2015

Yellow rust (stripe rust), caused by Puccinia striiformis f. sp. tritici, is one of the most destructive foliar diseases of wheat in Egypt and worldwide. In order to identify wheat genotypes resistant to yellow rust and develop molecular markers associated with the resistance, fifty F8 recombinant inbred lines (RILs) derived from a cross between resistant and susceptible bread wheat landraces were obtained. Artificial infection of Puccinia striiformis was performed under greenhouse conditions during two growing seasons and relative resistance index (RRI) was calculated. Two Egyptian bread wheat cultivars i.e. Giza-168 (resistant) and Sakha-69 (susceptible) were also evaluated. RRI values of two-year trial showed that 10 RILs responded with RRI value >6 <9 with an average of 7.29, which exceeded the Egyptian bread wheat cultivar Giza-168 (5.58). Thirty three RILs were included among the acceptable range having RRI value >2 <6. However, only 7 RILs showed RRI value <2. Five RILs expressed hypersensitive type of resistance (R) against the pathogen and showed the lowest Average Coefficient of Infection (ACI). Bulked segregant analysis (BSA) with eight simple sequence repeat (SSR), eight sequence-related amplified polymorphism (SRAP) and sixteen random amplified polymorphic DNA (RAPD) markers revealed that three SSR, three SRAP and six RAPD markers were found to be associated with the resistance to yellow rust. However, further molecular analyses would be performed to confirm markers associated with the resistance and suitable for marker-assisted selection. Resistant RILs identified in the study could be efficiently used to improve the resistance to yellow rust in wheat.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.112.2-112
• /
• 2003

Levels of blister rust infection (from Cronartium ribicola) varied in western white pine(Pinus monticola Dougl.) seedlings grown in two nurseries in northern Idaho. This observation suggested the potential importance of environmental components operating on the blister rust pathosystem. In an experiment designed to test the influence of environmental conditions at two nurseries, seedlings of a single genetic source were unintentionally held in cold storage for 6 months longer at one nursery than at the other. Subsequently, these seedlings, which had been growing under nursery conditions for 7 months or 1 month, were inoculated with blister rust spores on September 9th, 1999. Infection efficiency measured on the seedlings with only 1 month of growth was 70X greater than on the seedlings that had 7 months for their new growth to mature. Results from this nursery test and infection levels of northern Idaho resistant selections in mild climates suggest that expression of genes related to rust resistance in western white pine can be manipulated by regulation of phonology. If so, several new molecular tools may be employed to enhance our understanding of environmental regulation of genes for blister rust resistance.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.192-198
• /
• 2006

To provide an aqueous rust inhibitor for metalworking lubricant having low toxicity and excellent rust resistance, we synthesized diester of malonic acid by three consecutive esterifications with over 98% of conversion. This substituted malonic diester could be used as an additive to mineral oil based metalworking lubricant. These metalworking lubricant compositions were showed excellent rust resistance and suitable for various metals and different metalworking processes including hot rolling and cold rolling of aluminum and aluminum alloys.

• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.69-80
• /
• 2000

This paper presents the prediction of remaining service life of the concrete due to steel corrosion caused by the following three cases; carbonation, using sea sand and using deicing salts. The assessment of initiation period was generalized considering the existing perdiction models in the literature, corrosion experiment and field assessment. To evaluate the prediction equation of rust growth, the corrosion accelerating experiments was performed. The polarization resistance was measured by potentiostat and the conversion coefficient of polarzation resistance to corrosion rate was determined by the measurement of real mass loss. Chloride content, carbonation, cover depth, relative humidity, water-cement ratio(W/C), and the use of deicing salts were taken into account and the resulting prediction equation of rust growth was proposed on the basis of these properties. The proposed equation is to predict the rust growth during any specified period of time and be effective in particular for predicting service life of concrete in the case of using sea sand.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.121-129
• /
• 2005

Basic design concept of the future steel structure requires environmental compatibility and maintenance free capability to minimize economic burdens. Recent trends in alloy design for advanced weathering steel include addition of various alloying elements which can enhance formation of stable and protective rust layer even in polluted urban and/or high $Cl^{-}$ environment. The effects of Ca, Ni, W, and Mo addition on the corrosion property of Ca-modified weathering steel were evaluated through a series of electrochemical tests (pH measurement and electrochemical impedance spectroscopy: EIS) and structural analysis on rust layer formed on the steel surface. Ca-containing inclusions of Ca-Al-Mn-O-S compound are formed if the amount of Ca addition is over 25 ppm. Steels with higher Ca content results in higher pH value for condensed water film formed on the steel surface, however, addition of Ni, W, and Mo does not affect pH value of the thin water film. The steels containing a high amount of Ca, Ni, W and Mo showed a dense and compact rust layer with enhanced amount of ${\alpha}-FeOOH$. Addition of Ni, W and Mo in Ca-modified weathering steel shows anion-selectivity and contributes to lower the permeability of $Cl^{-}$ ions. Effect of each alloying element on the formation of protective rust layer will be discussed in detail with respect to corrosion resistance.

• Corrosion Science and Technology
• /
• 제5권1호
• /
• pp.27-32
• /
• 2006

One of the critical issues in the coating specification is the allowable limit of surface contaminant(s) - such as soluble salt(s), grit dust, and rust - after grit blasting. Yet, there is no universally accepted data supporting the relationship between the long-term coating performance and the amount of various surface contaminants allowed after grit blasting. In this study, it was attempted to prepare epoxy coatings applied on grit-blasted steel substrate dosed with controlled amount of surface contaminants - such as soluble salt(s), grit dust, and rust. Then, coating samples were subjected to 4,200 hours of cyclic test(NORSOK M-501), which were then evaluated in terms of resistance to rust creepage, blistering, chalking, rusting, cracking and adhesion strength. Additional investigations on the possible damage at the paint/steel interface were carried out using an Electrochemical Impedance Spectroscopy(EIS) and observations of under-film-corrosion. Test results suggested that the current industrial specifications were well matched with the allowable degree of rust, whereas the allowable amount of soluble salt and grit dust after grit blasting showed a certain deviation from the specifications currently employed for fabrication of marine vessels and offshore facilities.

• 소성∙가공
• /
• 제28권2호
• /
• pp.71-76
• /
• 2019

Corrosion resistance is one of the essential properties required in steel bolts. The various types of coatings are used to improve the corrosion resistance of steel bolts. But, roll formed, subsequently Zn alloy electrodeposited and top coated steel bolt easily takes place the white storage stain or white rust under high humidity condition. To investigate the corrosion resistance of roll formed and subsequently the various types of coated steel bolts, their polarization curves were measured by potentio-dynamic tester in this study. Based on the measured polarization curves, the more times of chromate and top coating on roll formed steel bolt, the higher corrosion resistance was shown. The roll formed steel bolt, which was Zn-Ni electro-deposited, two times chromated, one time inorganic top coated, one time organic top coated and annealed, showed the best corrosion resistance.

• 소성∙가공
• /
• 제21권5호
• /
• pp.330-335
• /
• 2012

Roll formed steel bolts are electrodeposited with Zn-Ni to protect themselves from corrosion. However, white storage stain or white rust(corrosion) is found on Zn-Ni electrodeposited surface of steel bolts when they are exposed to moisture. In this paper a new process is introduced to protect Zn-Ni electrodeposited steel bolt from white storage stain or white rust for a long time under the salt spray test and high humidity test conditions. The better corrosion resistance could be gotten by the additional process of Ni-P electroless deposition and heat treatment to conventional manufacturing method of Zn-Ni coated steel bolt. The corrosion resistance of Zn-Al powder slurry coated steel bolt showed better than that of Zn-Ni electrodeposited one.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.741-746
• /
• 2008

RC 구조물에서 매립된 철근의 부식을 억제하기 위하여 많은 방법들이 소개되어 왔다. 철근의 부식을 억제하는 방법 중 하나가 부식억제제이다. 최근 탄닌산을 이용하여 활성태의 녹을 부동태의 녹으로 전환시킴으로써 부식의 진행을 지연시키는 기술이 개발되었다. 그러나 이 부식억제제가 일반적인 금속 제품에 대한 방식을 위하여 개발되었기 때문에 콘크리트구조물에 대한 성능이 검토되지 않았다. 따라서 본 연구에서는 탄닌산을 이용한 부식억제제의 적용성을 콘크리트 시험체에 대하여 조사하였다. 연구 결과에 따르면, 탄닌산 부식억제제는 콘크리트에 있어 시공성 및 압축강도의 저하를 발생시키지 않았다. 부식억제제가 시멘트 중량당 4% 이상 첨가될 경우, 염화물 침투깊이가 10% 정도 감소하였다. 또한, 탄닌산 부식억제제는 녹을 안정한 상태로 변환시키는 효과를 가지고 있어, 부식 저항성이 향상된다. 특히, 6% 이상의 첨가가 부식 저항성에 효과적인 것으로 나타났다.