• 한국농촌건축학회논문집
• /
• 제11권3호
• /
• pp.53-61
• /
• 2009

In this study, the design characteristics and the cognition characteristics are investigated and conducted a survey of a bus stop, which most affects to the road scenery among the road fixture. and the result follows. The design characteristic of a bus stop is the uniform, as a box or appears urban image strongly which is not conform the Farm-village. The preference of the I image, A image and H image are high but on the other hand the preference of the E image, D image and F image are lower then average. As following conducted cognition characteristics, affirmative image is similar then the Korean traditional loop shape or using natural materials. It appears that the traditional image or the natural image is preferred then urban images by individuality of the Farm-village. Therefore, in the future, the design of the Farm-village bus stop needs to consider an area features and an environmental preservation design when design.

• 한국환경과학회지
• /
• 제12권1호
• /
• pp.23-34
• /
• 2003

Urban air quality is usually worse than that of rural counterpart. The contrasting atmospheric properties seem to be direct result of different urban-rural air pollutant emission. Hence, the emission estimation of air pollutants plays an important role to the atmospheric environmental management. The main purpose of this study is to find out the temporal and spatial distribution of air pollutant emission in Daegu area. For the study, the Daegu statistical yearbook and data of waste facilities and the report on traffic survey issued by Daegu metropolitan city and the statistical yearbook on the road capacity issued by the ministry of construction and transportation are used. Each item for the emission estimation is $SO_2$, CO, HC, $NO_x$, PM-10 from point, line and area source. The result were as follow; (1) The air pollutants with the highest amount of emission from the emission source is CO followed by $NO_x$, $SO_2$, PM-10, HC in descending order of magnitude. (2) The annually totaled air pollutant emission consists of 81%(73,185 ton/year) of line, 11%(9,589% ton/year) of area and 8%(7,445 ton/year) of point source in Daegu. Air polluant emission was mainly due to line sources. (3) High-emission of the air pollutants of line source appeared ariond Bukgu, Dalseonggun, Dongu and Seogu ; the areas with highway networks.

• 한국ITS학회 논문지
• /
• 제22권5호
• /
• pp.19-29
• /
• 2023

우리나라 도로 사고원단위는 도로 종류와 차로 수에 따라 단순 구분하고 있으나, 국외는 사고에 영향을 미치는 다양한 요소를 적용하고 있다. 본 논문은 TAAS(Traffic Accident Analysis System)의 사고 자료를 이용하여 일반국도 사고원단위를 도시부, 지방부, Older, 및 Modern 도로로 세분하였으며, 사고절감비용 산정 모형을 제시하였다. 국도 1,416.2km의 표본을 토대로 분석된 사망원단위(인/억대·km)는 도시부-Older 4.21, 도시부-Modern 1.37, 지방부-Older 2.18 및 지방부-Modern 0.99로 Older가 Modern 도로보다 높고, 도시부가 지방부보다 높게 분석되었다. 부상원단위(인/억대·km)는 도시부-Older 182.63, 도시부-Modern 103.42, 지방부-Older 67.44 및 지방부-Modern 42.96으로 사망원단위와 유사한 패턴으로 분석되었다. Modern 도로의 경우 KDI 지침의 사고원단위보다 매우 낮은 수준이다. 본 연구의 사고원단위를 적용하여 편익을 산정한 결과 사고비용절감편익 비율이 0.6%에서 14.1%로 증가하였으며, B/C는 0.626에서 0.724로 개선되었다.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.101-113
• /
• 2008

본 연구는 지방부 고속도로 상에서 유출지점용 도로전광표지의 적정 설치지점을 도출하기 위하여, 차량시뮬레이터 실험 자료를 변수로 운전자가 도로전광표지의 교통정보를 판독한 후 고소고도로 유출시설로 우회가 가능한지 여부를 판단할 수 있는 판별식(Discriminant Model for VMS installation : DMV식)을 개발하는 것이다. 연구결과로는 (첫째), 차량시뮬레이터 실험을 통하여 도로전광표지 설치지점을 변경시키면서 운전자의 인적, 행태적 자료를 수집하고, 이를 근거로 도로전광표지 설치지점에 따라 우회 가능성을 판단할 수 있는 DMV식을 개발하였다. (둘째) 우회가능성은 도로전광표지 설치지점이 멀수록, 운전자경력이 많을수록 고속도로 운전경험이 많을수록, 차량속도가 낮을수록 높아지는 것으로 나타났으며, 우회가능성에 큰 영향을 미치는 변수는 도로전광표지 설치지점, 고속도로 경험, 운전경력, 차량속도 순으로 나타났다. (셋째), 개발된 DMV식의 예측력을 검증한 결과, 개별 운전자가 도로전광표지의 교통정보를 판독하고 이에 대응하여 우회가능성을 정확하게 예측하였다. (넷째) DMV식을 이용하여 설치지점에 대한 우회가능성의 민감도분석을 수행한 결과, 지방부 고속도로에서 운전자의 85%이상이 도로전광표지로부터 교통정보를 판독하고 유출지점으로 진입하기 위해서는 유출지점으로부터 최소한 3.2km의 이격거리가 필요한 것으로 분석되었다. 이는 피실험자가 20, 30대 운전자로 대표성에 한계가 있음을 감안하더라도 유출지점으로부터 건설교통부 지침에서 제시한 3.0Km이상의 이격거리가 필요하다는 것을 시사한다 하겠다.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.341-347
• /
• 2008

고속도로상의 강교 도장에 사용되어온 도장계는 광명단 조합페인트, 염화고무계, 수용성 무기징크, 내후성 중방식, 초내후성 중방식 등이 있으며, 이들 도장계 중 가장 널리 사용되어온 도장계와 열화가 많이 진행된 도장계를 중심으로 도막열화도 평가를 실시하고 통계적 회귀분석을 통해 도막의 수명을 예측해 보았다. 평가 대상 교량은 고속도로상의 교량 중 75개 교량을 선정하였으며, 한국도로공사에서 사용하고 있는 "강교의 보수도장 지침"에서 규정하는 평가점 부여 방법에 따라 도막열화도 평가를 실시하였다. 도막수명예측 결과는 전국 평균이 13.0~13.3년, 수도권의 도시 및 공장지역 11.8년, 수도권 이외의 전원지역 13.2년, 염화고무계 13.5~13.7년, 조합페인트 12.86년으로 나타났다. 도막의 잔여수명 예측을 위해 기준열화곡선을 현재 시점의 열화도 위치로 x축 및 y축에 대하여 각각 평행이동시켜 본 결과 x축에 대해 평행이동하는 것이 실제 열화 양상과 잘 부합된다고 판단되었다. 고속도로상의 강교 전반에 걸쳐 보수도장 판정기준을 수립하기 위하여 기준열화곡선 회귀분석시 도출된 각 계수의 오차값을 가감하여 상한식과 하한식을 구하였다. 도막수명예측 상 하한곡선을 바탕으로 강교 도장의 잔여 수명과 적정 보수도장 시기를 예측하기 위하여 도막의 상태에 따라 8개 부분으로 영역을 구분하고, 각각의 영역에 대한 보수도장 판정 기준을 제시하였다.

• 교통기술과정책
• /
• 제6권1호
• /
• pp.155-170
• /
• 2009

In an effort to increase the operational efficiency of highways, South Korea has been increasing its design speed recently. However, the use of higher design speed will also increase construction costs. Moreover, increasing the design speed is expected to have an impact on safety. Hence, there is a strong need to demonstrate that the benefits outweigh the cost of having a higher design speed. This study surveyed a sample of design engineers to determine their awareness of the consequences of increasing design speed and their assessment of the right design speed for an actual rural arterial. In addition to the survey, a case study of three recently upgraded highways was conducted to determine the changes in traffic volumes, speeds, travel times, and safety.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.66-77
• /
• 1992

A prototype probabilistic approach to thickness design for asphalt pavement surface course was developed using first-order second moment probability model. The tensile strain (load effect) developing at the bottom of surface layer due to the wheel load and the critical strain (resistance) of asphalt concrete were used as random variables for pavement reliability analysis. Based on the parameters for load effect and resistance data collected from reference and field, simulated data were generated by Monte Carlo method for reliability evaluation of the pavement for a typical rural highway. Thickness of pavement surface course was defined in terms of target reliability of the pavement, growth factor of traffic, design life of pavement and resistance of the asphalt concrete to be placed on the pavement. According to these rationales, prototype thickness design chrats were sugested through example studies. From these, similar design charts can be developed for many pavements if appropriate data and target reliability are determined.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.197-203
• /
• 1999

GPS의 이동측량 방법을 사용하여 위치정보와 속성정보를 취득하는 경우, 대상지의 지형학적 위치와 여러가지 오차요인에 의해 이상점이 발생하게 된다. 본 연구에서는 절사평균 방법과 1차 미분을 이용한 이상점 검출 알고리즘을 작성하고, 선형보간법과 다항식보간법을 사용하여 이상점 보간을 하였다. 또한 정확하게 보간된 데이터를 이용하여 국도 30 km구간에 대해 수치지도를 제작하였으며 수치지도를 제작하는 과정에서 발생될 수 있는 문제점들을 고찰하고 문제점들의 해결을 통해 정확한 GIS 커버리지 맵을 작성하였다.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.595-603
• /
• 2015

With the advances of the big-data process technology, acquiring the real-time information from the massive image data taken by a mobile device inside a vehicle will be possible in the near future. Among the information that can be found around the vehicle, the route information is needed for safe driving. In this study, the automatic extraction of route information from the road sign imagery was dealt with. The scope of the route information in this study included the route number, route type, and their relationship with the driving direction. For the recognition of the route number, the modified Tesseract OCR (Optical Character Recognition) engine was used after extracting the rectangular-road-sign area with the Freeman chain code tracing algorithm. The route types (expressway, highway, rural highway, and municipal road) are recognized using the proposed algorithms, which are acquired from colour space analysis. Those road signs provide information about the route number as well as the roads that may be encountered along the way. In this study, such information was called “OTW (on the way)” or “TTW (to the way)” which between the two should be indicated is determined using direction information. Finally, the route number is matched with the direction information. Experiments are carried out with the road sign imagery taken inside a car. As a result, route numbers, route number type, OTW or TTW are successfully recognized, however some errors occurred in the process of matching TTW number with the direction.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.103-110
• /
• 2016

PURPOSES: In this paper, the effectiveness of speed-maintained standardization in road geometry on environmental impact at a downward slope location, based on greenhouse gas (GHG) emission indicators, was studied. Specifically, the aim of this study was to ascertain whether speed-maintained standardization resulted in decreased $CO_2$ emissions as well as noise pollution, due to reduced vehicle speeds. METHODS : In this study, speed-maintained standardization in road geometry was proposed as a means to reduce vehicle speeds, with a view to reducing $CO_2$ emissions and noise pollution. This technique was applied at a downward slope location. The vehicle speeds, $CO_2$ emissions, and noise levels before and after application of speed-maintained standardization were compared. RESULTS: It was found that speed-maintained standardization was effective as a means to reduce speed, as well as $CO_2$ emissions and noise pollution. By applying speed-maintained standardization, it was confirmed that vehicle speeds were reduced consistently. As a result, $CO_2$ emissions and noise levels were decreased by 9% and 11%, respectively. CONCLUSIONS : This study confirmed that speed-maintained standardization in road geometry is effective in reducing vehicle speeds, $CO_2$ emissions, and noise levels. Moreover, there is further scope for the application of this method in the design of roads in urban and rural areas, as well as in the design of highways.