• 자원리싸이클링
• /
• 제18권5호
• /
• pp.63-71
• /
• 2009

재활용선별시설에서 파봉공정은 연계된 선별공정을 위한 필수 공정으로 주로 인력에 의한 작업과 일부 기계식 파봉장치가 도입되었다. 그러나, 기계식 파봉장치의 경우 재활용 대상폐기물을 파쇄하여 선별효율의 저하 및 폭발 등 작업자의 안전문제가 자주 발생하고 있다. 본 연구에서는 기존 파봉 방식의 문제점을 해결 할 수 있는 회전칼날팔각드럼식 파봉 정량공급 장치를 개발하여 성능평가 및 환경성 검토를 통한 현장 적용 가능성 평가를 수행하였다. 실험결과에 의하면 처리용량은 드럼회전수 8.2 rpm, 벨트컨베이어 속도 1.25 m/min에서 5.6 ton/hr로 설계용량인 5.0 ton/hr를 만족하였으며, 최대 처리용량은 8.8 ton/hr으로 나타났다. 봉투 속 봉투의 파봉효율은 95.6% 및 겉봉투의 경우에는 100%로 나타났으며, 특히 재활용대상폐기물 중 가장 쉽게 파손되는 유리병의 원형보존율은 약 96.5%로 정가되었다. 본 장치의 소음, 진동 및 비산먼지 농도 등에 대한 환경성 정토결과 환경오염배출허용 법적기준치를 모두 만족하는 것으로 조사되었다. 따라서, 본 파봉장치를 재활용선별시설에 적용할 경우 기존의 인력파봉과 기계식파봉에서 발생되었던 문제점을 크게 개선할 수 있다.

• 한국가시화정보학회지
• /
• 제22권1호
• /
• pp.28-33
• /
• 2024

We visualized the rupturing of liquid films flowing over a disk rotating with large angular velocity. A setup of high speed imaging for liquid flows on dark and reflective surfaces are suggested. From the result, rivulet structures are revealed to be strongly governed by three-dimensional surface structures developed in the film flow. Additionally, unique flow structures including the rivulet sliding and internal meandering are investigated. Generation mechanism of such structures are discussed in terms of the dynamic contact angle theory.

• Journal of Korean Neurosurgical Society
• /
• 제55권6호
• /
• pp.357-361
• /
• 2014

Computed tomography angiography (CTA) is commonly used in setting of subarachnoid hemorrhage, but imaging features of aneurysm rupturing taking place at the time of scanning has rarely been described. The author reports a case of actively rebleeding aneurysm of the anterior communicating artery with intraventricular extravasation on the hyperacute CTA imaging. The rebleeding route, not into the third ventricle but into the lateral ventricles, can be visualized by real-time three-dimensional CT pictures. The hemorrhage broke the septum pellucidum and the lamina rostralis rather than the lamina terminalis.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.563-573
• /
• 2014

In hydroforming, the general technique employed to overcome the problem of die corner filling consist in increasing the maximum fluid pressure during the forming process. This technique, in other hand, leads to other difficulties such as thinning and rupturing of the final work piece. In this paper, a new technique has been suggested in order to produce a part with complete filled corners. In this approach, two moveable bushes have been used. So, the workpiece moves driven by both bushes simultaneously. In the first stage, system pressure increases until a maximum of 15 MPa, providing aninitial tube bulge. The results showed that the pressure in this stage have to be limited to 17 MPa to avoid fracture. In a second stage, bushes are moved keeping the constant initial pressure. The punches act simultaneously at the die extremities. Results show that the friction between part and die decreases during the forming process significantly. Also, by using this technique it is possible to produce a part with reasonable uniform thickness distribution. Other outcomes of applying this method are the lower pressures required to manufacture a workpiece with complete filled corners with no wrinkling.

• Earthquakes and Structures
• /
• 제14권5호
• /
• pp.399-409
• /
• 2018

The dynamic response and seismic damage of single-layer reticulated shells in the near field of a rupturing fault can be different from those in the far field due to the different characteristics in the ground motions. To investigate the effect, the dynamic response and seismic damage of this spatial structures subjected to two different ground motions were numerically studied by nonlinear dynamic response analysis. Firstly, twelve seismic waves with an apparent velocity pulse, including horizontal and vertical seismic waves, were selected to represent the near-fault ground motion characteristics. In contrast, twelve seismic records recorded at the same site from other or same events where the epicenter was far away from the site were employed as the far-fault ground motions. Secondly, the parametric modeling process of Kiewitt single-layer reticulated domes using the finite-element package ANSYS was described carefully. Thirdly, a nonlinear time-history response analysis was carried out for typical domes subjected to different earthquakes, followed by analyzing the dynamic response and seismic damage of this spatial structures under two different ground motions based on the maximum nodal displacements and Park-Ang index as well as dissipated energy. The results showed that this spatial structures in the near field of a rupturing fault exhibit a larger dynamic response and seismic damage than those obtained from far-fault ground motions. In addition, the results also showed that the frequency overlap between structures and ground motions has a significant influence on the dynamic response of the single-layer reticulated shells, the duration of the ground motions has little effects.

• 한국임상수의학회지
• /
• 제40권3호
• /
• pp.215-220
• /
• 2023

A 3-month-old Korean native cattle (Hanwoo) calf with difficulty taking normal posture and an inability to rise was referred for a definite diagnosis and active treatment, including surgery. The calf had a history of an accident in which both hind limbs were trapped in a barn structure. After admission, a "rabbit leg" posture was observed, a typical sign of gastrocnemius muscle rupture, and both digits were knuckled downward like they were trying to grip the ground. This was considered to be a result of the superficial digital flexor not rupturing but only the gastrocnemius muscle rupturing. Physical examination revealed laceration of the metatarsus and firmness behind both stifle joints which were presumed to be the sites of gastrocnemius muscle rupture. Skeletal abnormalities, including fractures, were ruled out by radiography. Based on these findings, the patient was diagnosed with bilateral gastrocnemius muscle rupture, and surgery was performed to reconnect the head of the ruptured muscle. Because the rupture occurred perpendicular to the muscle direction, the locking loop technique, a method of suturing severed tendons, was used to reduce the tension. After surgery, the cast was used to prevent further injuries and promote voluntary rehabilitation. Follow-up was completed, with the calf showing normal posture and gait 112 days after surgery. This is the first case report in the Republic of Korea describing the successful diagnosis and treatment of bilateral gastrocnemius muscle rupture in a calf.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1477-1484
• /
• 2002

Various characteristics of a thin liquid film in its vapor-phase are investigated using the molecular dynamics technique. Local distributions of the temperature, density, normal and tangential pressure components, and stress are calculated for various film thicknesses and temperature levels. Distributions of local stresses change considerably with respect to film thicknesses, and interracial regions on both sides of the film start to overlap with each other as the film becomes thinner. Integration of the local stresses, i.e., the surface tension, however, does not vary much regardless of the interfacial overlap. The minimum thickness of a liquid film before rupturing is estimated with respect to the calculation domain sizes and is compared with a simple theoretical relation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.365-367
• /
• 2010

In this paper, we presented the exact Riemann solver for the air-water two-phase shock tube problems where the strength of the propagated sock wave is moderately weak. The shock tube has a diaphragm in the middle which separates water medium in the left and air medium in the right. By rupturing the diaphragm, various waves such as rarefaction wave, shock wave and contact discontinuity are propagated into water and air. Both fluids are treated as compressible, with the linearized equations of state. We used the isentropic relations for the air and water assuming a weak shock wave. We solved the shock tube problem considering a high pressure in the water and a low pressure in the air. The numerical results cleary showed a left-traveling rarefaction wave in the water, a right-traveling shock wave in the air, and the right-traveling material interface.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.73-80
• /
• 2010

In this paper, we present the exact Riemann solver for the compressible liquid-gas two-phase shock tube problems. We hereby consider both isentropic and non-isentropic two-phase flows. The shock tube has a diaphragm in the mid-section which separates the liquid medium on the left and the gas medium on the right. By rupturing the diaphragm, various waves are observed on the phasic field variables such as pressure, density, temperature and void fraction in the form of rarefaction wave, shock wave and material interface (contact discontinuity). Both phases are treated as compressible fluids using the linearized equation of state or the stiffened-gas equation of state. We solve several shock tube problems made of a high/low pressure in the liquid and a low/high pressure in the gas. The wave propagations are well resolved by the exact Riemann solutions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권2호
• /
• pp.153-158
• /
• 1985

The dependence of the corrosion potential on the stress corrosion cracking of 304 austenitic stainless steel was inspected by using the specimen of constant displacement type under the environment of 42% $MgCl_2$ boiled solution. The relationship of the corrosion potential to the intermittent propagation behaviour in stress corrosion cracking was cleared. As the results, a possible model of stress corrosion cracking of 304 austenitic stainless steel in $MgCl_2$ boiled solution was presented on the basis of the Film Rupture Model. This model is specified by the following process. Rupturing of passive film at notch tip .rarw. Dissolution of metal ion and formation of tunnel .rarw. Initiation of microcrack .rarw. Propagation of main crack .rarw. Recreation of passive film at new crack surface.