• Journal of Korean Society on Water Environment
• /
• v.29 no.3
• /
• pp.309-316
• /
• 2013

The Non-Point Sources shows different characteristics over a wide area depending on basin situation and rainfall events etc. In addition, Among various land uses in the urban areas, runoff appears high in the paved area, though small in its size, during a heavy rain than in other land use owing to its high impervious rate, and pollutants become severly accumulated owing to continual transportation of vehicles, characteristically showing high concentrations of runoff in the early stage. As a result, several advanced countries including USA give a special emphasis on the paved area as a target for supervision. In view of these aspects, the research is not only required to consider separated sub-basins which are distributed according to land uses, but also needed to develop a suitable monitoring which is reflected rainfall-runoff relation. The on-site monitoring has been performed to collect data in object watershed as well.

• Korean Journal of Ecology and Environment
• /
• v.38 no.spc
• /
• pp.67-75
• /
• 2005

The objectives of this study were to understand the runoff characteristics of the non-point sources originating from impervious surfaces and to assess their effect on the aquatic environment in the urban areas. The concentration of pollutants (SS, BOD, COD and T-P) except for T-N showed the highest value in runoff from road, and event mean concentration (EMC) also showed high value from road. The pollutants discharged from road showed a higher concentration in the beginning stage (0 ${\sim}$ 30%) of progressive percentage of rainfall. The contribution percentages of non-point sources by load were 44.9% for SS, 11.2% for BOD, 21.4% for COD, 11.4% for T-N and 8.1% for T-P in the total load of pollutant discharged through sewer. From our results, the road was a significant potential source that deteriorated water quality of the streams and lakes in the vicinity of the urban area during the rain period. Therefore, counter plan is required to reduce pollutant concentration on the road from non-point sources in the urban area. Also, since pollutant concentration in the beginning stage of rainfall was quite high, road cleaning seems to be one of the very useful methods to prevent inflowing of pollutants to the aquatic environment.

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1203-1212
• /
• 2012

Yongsan ward is located at central place connecting south and north ecology axis of seoul. Various environment-friendly Yongsan development could pose positive effects on NPS(non pollutant source) pollutant reductions and water quality improvement at Han-rive because BOD, T-N, and T-P NPS discharges took 90% of total pollutant from this area. In this study, direct runoff and NPS pollutant loads were evaluated before and after development using spatio-tamporal change in CN(curve number) and EMC(event mean concentration) data. It was found that direct runoff value is $23,584,724m^3$, and BOD, T-N and T-P loads are 104,456 kg/year, 111,483 kg/year and 7,500 kg/year under pre-development condition, respectively. Annual runoff, BOD, T-N and T-P reducing rate were 12.9%, 33.3%, 35.6% and 40.7% under integrated post-development condition, respectively. Based on the results obtained in this study, environment-friendly urban development could be achieved at Yongsan area.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.599-612
• /
• 2004

The continuous long-term rainfall-runoff simulation model SWAT has the advantage of being able to account for various land use, however, SWAT lacks the capability of simulating the drainage characteristics of urban area. On the other hand, SWMM, which is the most popular model for runoff analysis of urban watershed, has the advantage of being capable of considering surface and drainage characteristics in urban area, but SWMM cannot easily account for land use other than urban area within a watershed. In this study, SWAT-SWMM model, which builds on the strengths of SWAT and SWMM, has been applied to the Osan River Watershed which is a tributary watershed to the Gyung-Ahn River. From the application, the results from coupled SWAT-SWMM model has been compared to the ones from SWAT for each hydrologic component such as evapotranspiration, surface runoff, groundwater flow, and watershed and channel discharge, and the runoff characteristics of two models for each hydrologic component has been discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1089-1094
• /
• 2009

The SWMM (Storm Water Management Model) was applied to Princeton University campus, USA to predict the change of the runoff characteristics. Topography and infra structure of urban area are used in detail and watershed is made as form of regular square to improve the efficiency of data. Princeton campus was divided into 131 sub-basins and model input parameters were obtained from DEM (Digital Elevation Model), land use type, and campus management map, etc.. The model was validated based on the measured meteorological data. The validated model was used to analyze the change of the runoff characteristics according to urbanization, which are two different scenarios: 50% and 100% increase of impervious area. The increase of impervious area causes the increase of runoff, especially in the first-flush.

• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.58-68
• /
• 2009

Low impact development (LID) technique is relatively new concept to reduce surface runoff and pollutant loading from land cover by attempting to match predevelopment condition with various integrated management practices (IMPs). In this study, computational model for designing and evaluating LID, named LIDMOD, was developed based on SCS-CN method and applied at Andong bus terminal to evaluate LID applicapability and design retention/detention area for volume or peak flow control. LIDMOD simulated with 21 years simulation period that yearly surface runoff by post-development without LID was significantly higher than that with LID showing about 2.8 times and LID could reduce efficiently yearly surface runoff with 75% reduction of increased runoff by conventional post development. LIDMOD designed detention area for volume/peak flow control with 20.2% of total area by hybrid design. LID can also efficiently reduce pollutant load from land cover. Pollutant loads from post-development without LID was much higher than those from pre-development with showing 37 times for BOD, 2 times for TN, and 9 times for TP. Pollutant loads from post-development with LID represented about 57% of those without LID. Increasing groundwater recharge reducing cooling and heating fee, creating green refuge at building area can be considered as additional benefits of LID. At the point of reducing runoff and pollutant load, LID might be important technique for Korean TMDL and LIDMOD can be useful tool to calculate unit load for the case of LID application.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.287-293
• /
• 2012

This study suggests the topographic index-based methodology which can be used to represent the saturation of soil and thereby change of variable runoff area at basin scale. ${\infty}$-flow direction method is applied to estimate topographic index because of its freedom from the restriction of 8-flow direction method as well as possibility of the minimum flow dispersion. From the comparison of topographic index distribution with the existing result the methodology is shown to be a workable one. It is judged that the representation of variable runoff area may be a systematic tool to investigate the dynamic and non-linear property of rainfall-runoff process because it can provide the explicit way to spatial distribution of basin saturation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.3 s.18
• /
• pp.29-39
• /
• 2005

The objective of this study is to analyze the relation of critical duration according to hydrologic characteristics in urban areas. RRL, ILLUDAS, SWMM, and SMADA urban runoff models were applied to the Seongnae and Banpo watershed and experiment area of the Dong-Eui University. Also, hydrologic characteristics such as temporal pattern of rainfall, rainfall intensity formula, antecedent moisture condition, return period, and urban runoff model were used to simulate the critical duration of the test areas. The results of this study are as follows; (1) The type of temporal pattern of rainfall which causes maximum peak discharge in urban area has resulted in Huff's 4th quartile distribution. (2) The critical duration in urban areas were not influenced by hydrological factors except urban runoff model. (3) Peak discharge and critical duration in urban areas were influenced by the urban runoff model, and the SWMM model using Huff's 4th quartile distribution shows maximum critical duration.

• Journal of Korea Water Resources Association
• /
• v.44 no.11
• /
• pp.875-887
• /
• 2011

The objective of this study is to develop and evaluate a Korean threshold runoff computation method. The selected study area is the Han-River basin and the stream channels in the study area are divided into 3 parts; natural channel and artificial manmade channel for small mountainous catchments, and main channel for master stream. The threshold runoff criteria for small streams is decided to 0.5 m water level increase from the channel bottom, which is the level that mountain climbers and campers successfully escape from natural flood damage. Threshold runoff values in natural channel of small mountainous area are computed by the results from the regional regression analysis between parameters of basin and stream channel, while those in artificial channel of small mountainous area are obtained from the data of basin and channel characteristics parameter. On the other hand, the threshold runoff values for master channel are used the warning flood level that is useful information for escaping guideline for riverside users. For verification of the threshold runoff computation method proposed in this study, three flash flood cases are selected and compared with observed values, which is obtained from SCS effective rainfall computation. The 1, 3, 6-hour effective rainfall values are greater than the corresponding threshold runoff values represents that the proposed computation results are reasonable.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.111-119
• /
• 2008

The runoff coefficient for a block paved area is determined with regional rainfall distribution. The Rational Method is a basic equation of a drainage system design and is a function of runoff coefficient, rainfall intensity and area. A runoff coefficient is the ratio of rainfall intensity and runoff. The rainfall intensity which is a function of the return period and rainfall duration differs by region. Therefore the runoff coefficient varies regionally even though there is the same return period and rainfall duration. The ratio of rainfall intensity and rainfall duration is decided by the loss of rainfall. The constant infiltration capacity of Horton's equation is adopted to determine the loss of rainfall. As time passed, the joint of the block paved area through which the infiltration occurs is covered by pollution material, sandy dust, pollen and is hardened by foot pressure, so the constant infiltration capacity may decrease. Six different sites were selected to verify the assumption of the constant infiltration capacity decrease and 10 year return period. 10, 20, and 30 minute rainfall duration were applied to calculate rainfall intensity. The results indicate that the Horton's constant infiltration capacity decreases over time and the minimum constant infiltration capacity is selected to compute runoff coefficients. The runoff coefficients varied by region ranging from $0.94{\sim}0.84$ for 10 minute of rainfall duration.