• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1437-1443
• /
• 2013

Railways are currently subject to the enforcement of speed limits for each curve as prescribed by the Railway Operating Rules in Korea. However, research is required to determine the maximum speed of trains passing through each curve that allows them to run without the risk of derailment in relation to the speed enhancement of existing railway tracks. In addition, factors affecting the running safety of railway vehicles can be classified into those in terms of vehicle aspects and those in terms of track aspects. This study sought to analyze the running safety of railway vehicles according to changes in the inclination of the rail from among the factors affecting the enhancement of safety against derailment. To increase the speed of trains passing through curves that have high derailment risk, this study also analyzed the running safety of railway vehicles according to the inclination of the rail and changes in running speed while a vehicle passes through each curve section in both the up and the down train line sections between Namsunghyun and Chungdo, which represent the actual conditions of railway tracks.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2006

The purpose of this study was to evaluate normalized jerk according to shoes, slope, and velocity during walking. Eleven different test subjects used three different types of shoes (running shoes, mountain climbing boots, and elevated forefoot walking shoes) at various walking speeds(1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2, 2.11, 2.33m/sec) and gradients(0, 3, 6, 10 degrees) on a treadmill. Since there were concerns about using the elevated forefoot shoes on an incline, these shoes were not used on a gradient. Motion Analysis (Motion Analysis Corp. Santa Rosa, CA USA) was conducted with four Falcon high speed digital motion capture cameras. Utilizing the maximum smoothness theory, it was hypothesized that there would be differences in jerk according to shoe type, velocity, and slope. Furthermore, it was assumed that running shoes would have the lowest values for normalized jerk because subjects were most accustomed to wearing these shoes. The results demonstrated that elevated forefoot walking shoes had lowest value for normalized jerk at heel. In contrast, elevated forefoot walking shoes had greater normalized jerk at the center of mass at most walking speeds. For most gradients and walking speeds, hiking boots had smaller medio-lateral directional normalized jerk at ankle than running shoes. These results alluded to an inverse ratio for jerk at the heel and at the COM for all types of shoes. Furthermore, as velocity increased, medio-lateral jerk was reduced for all gradients in both hiking boots and running shoes. Due to the fragility of the ankle joint, elevated forefoot walking shoes could be recommended for walking on flat surfaces because they minimize instability at the heel. Although the elevated forefoot walking shoes have the highest levels of jerk at the COM, the structure of the pelvis and spine allows for greater compensatory movement than the ankle. This movement at the COM might even have a beneficial effect of activating the muscles in the back and abdomen more than other shoes. On inclines hiking boots would be recommended over running shoes because hiking boots demonstrated more medio-lateral stability on a gradient than running shoes. These results also demonstrate the usefulness of normalized jerk theory in analyzing the relationship between the body and shoes, walking velocity, and movement up a slope.

• International Journal of Automotive Technology
• /
• v.7 no.4
• /
• pp.449-457
• /
• 2006

The driver model during drift cornering was examined, and a technique to improve vehicle movement performance during drift cornering was investigated. Based on the results obtained, the driver was found to steer using feedback of the body slip angle and the body slip angle velocity during drift cornering. Moreover, improvement of the cornering force characteristic, at which exceeded the maximum cornering force calm as much as possible is important.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.143-145
• /
• 2006

In this paper, single phase induction motor achieved improvement in efficiency by adapting the condition of Balanced operation and Quasi-balanced operation. Also, the process of efficiency improvement to find the optimum point of secondary resistance and running capacitor for working single phase induction motor is performed in order to attain the conclusion to put out the maximum efficiency at the rated operation point with meeting the starting torque.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.3 no.2
• /
• pp.91-93
• /
• 1978

A methodology which can be employed to obtain an optimal preventive maintenance policy that maximizes the total machine running time over the specified working period is proposed. A system considered is comprised of m machines and r

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.119-124
• /
• 1988

Real-time adaptive lattice predictor was implemented on the TMS32020 DSP chip for digital signal processing. The implemented system was composed of Input-Output units and centrla processing-control unit and its supporting assembly soft ware. The performance of hardware realization was verified by comparing input signal and one-step prediction signal which are calcualted by the real-time adaptive lattice predictor. As a result, for 4 stage lattice structure, the maximum running frequency was obtained as 6.41 KHz in this experiment.

• Journal of the Korean Society for Railway
• /
• v.6 no.4
• /
• pp.215-220
• /
• 2003

In this paper the dynamic characteristics of a Swing Motion Bogie, such as a critical speed and a carbody vibration, are investigated in reply to the request of the Meridian Rail Corporation in the United States. Also described are experimental results of the maximum speed, the derailment coefficient, the lateral force, the vertical force, the vibration acceleration and steady state lateral acceleration measured from main line tests.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.892-897
• /
• 2002

The research was requested by Meridian Rail Corporation in United States. The Swing Motion Bogie can application by Korea style if synthesize study result of bogie strength evaluation, bogie dynamic characteristics analysis, actual test(maximum speed, derailment coefficient, lateral force, vertical force, vibration acceleration, steady state lateral acceleration) etc..

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.220-224
• /
• 2002

As the train run through the tunnels, especially at high speed, pressure shock developed by the running train gives the influence on the pressure fluctuation inside the tunnel and consequently, inside the car. This pressure changes and pressure gradient is closely related with the tunnel section, train speed, air tightness of the train, length of the tunnel, etc. This study includes the analysis of the pressure behavior at the varied train speed and tunnel length. The results show that train speed affects the pressure gradient inside the car almost linearly, and that there exist the critical tunnel lengths that gives the maximum value of pressure change and pressure gradient, respectively.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.631-635
• /
• 2006

DC traction power system is operated ungrounded to minimize the stray current. This causes rail potential increase and makes hazardous condition to the person in touch with running rails. To prevent the hazardous condition, maximum allowable limits on rail potential rise are set by regulations in advanced foreign countries. In this paper, the simplified calculation methods for the rail potential rise and the stray currents are discussed.