• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.361-366
• /
• 2018

Ice crushing occurs in many situations that involve a sliding frictional component such as sports involving ice-contact, ice interaction with ship hulls, and ice-on-ice sliding/crushing within glaciers and between interacting sea ice floes. Ice crushing-friction tests were conducted in the lab at $-10^{\circ}C$ using a set of acrylic ice-crushing platens that included a flat smooth surface and a variety of high-roughness surfaces with regular arrays of small prominences. The experiments were part of Phase II tests of the Blade Runners technology for reducing ice-induced vibration. Ice was crushed against the platens where the ice movement had both a vertical and a horizontal component. High-speed imaging through the platens was used to observe the ice contact zone as it evolved during the tests. Vertical crushing rates were in the range 10-30 mm/s and the horizontal sliding rates were in the range 4.14-30 mm/s. Three types of freshwater ice were used. Friction coefficients were extraordinarily low and were proportional to the ratio of the tangential sliding rate and the normal crushing rate. For the rough surfaces all of the friction coefficient variation was determined by the fluid dynamics of a slurry that flowed through channels that developed between leeward-facing facets of the prominences and the moving ice. The slurry originated from a highly-lubricating self-generating squeeze film of ice particles and melt located between the encroaching intact ice and the surfaces.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1294-1306
• /
• 1992

본 연구에서는 IBPR 방법을 바탕으로 캐비티형상이 동일평면상에 있지 않은 경우에 대한 준3차원 유동해석과 주입기구가 있는 경우에 대한 유동해석을 별도로 수 행하여 실험결과와 비교하였다.해석결과는 실험과 잘 일치하였으며 그를 통해 앞서 개발한 IBRP방법이 보다 일반적인 경우에서의 캐비티 유동해석으로 확장, 응용될 수 있음을 확인할 수 있었다.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.72-78
• /
• 1990

본 연구에서는 기존의 설계 시스템들이 갖지 못한 완전한 삼차원적 모델의 주 형을 생성할 수 있으므로 응축 시뮬레이션, NC공구 경로 생성등의 응용 프로그램과 직 접적으로 연결될 수 있는 장점을 갖고 있다. 본 논문의 1편에서는 위의 설계과정중 목형과 압탕부의 설계에 대해서 기술하고 탕구계와 주형의 설계에 대해서는 2편에서 기술하도록 한다.

• 한국식물병리학회지
• /
• 제2권3호
• /
• pp.158-164
• /
• 1986

Fusarium oxysporum f. sp. fragariae에 의한 딸기 시들음병에 감염된 딸기 식물의 병태조직학적 특징을 광학현미경으로 조사한 결과 자연 또는 인공 감염된 뿌리, 관부, 잎자루 및 포복지의 도관내에는 본 병균의 균사와 대형, 소형 분생포자가 관찰되었으며, 이들 균체에 의한 도관의 폐쇄와 유관속내에 형성된 강(Cavity)이 관찰되었으나 다른 분화형에서 볼 수 있는 도관유조직의 비대현상, 분충체 및 pectin 물질에 의한 도관폐쇄는 관찰할 수 없었다. 따라서 딸기 시들음병의 위조발생은 균체에 의한 도관의 폐쇄가 중요한 요인으로 생각되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제3권3호
• /
• pp.235-244
• /
• 2010

Recent studies on the moment whirl due to leakage flow in the back shroud clearance of hydro-turbine runners or centrifugal pump impellers are summarized. First, destabilizing effect of leakage flow is discussed for lateral vibrations using simplified models. Then it is extended to the case of whirling motion of an overhung rotor and the criterion for the instability is obtained. The fluid moment caused by a leakage clearance flow between a rotating disk and a stationary casing was obtained by model tests under whirling and precession motion of the disk. It is shown that the whirl moment always destabilizes the whirl motion of the overhung rotor while the precession moment destabilizes the precession only when the precession speed is less than half the rotor speed. Then vibration analyses considering both whirl and precession are made by using the hydrodynamic moments determined by the model tests. For larger overhung rotors, the whirl moment is more important and cause whirl instability at all rotor speed. On the other hand, for smaller overhung rotors, the precession moment is more important and cancels the destabilizing effect of the whirl moment.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.881-890
• /
• 2011

In this study, thermal environment changes for a marathon course of IAAF World Championship, Daegu 2011 were modeled to provide improvements of thermal environment, so that runners could have the maximum condition and citizens pleasant streets. The three biggest size of intersections were selected for the study. Envi-met, 3G microclimate model, were used for a thermal environment analysis and three different cases - present status, planting roadside tree scenario, and roof-garden scenario - were compared. The followings are the results of the study. 1. The highest thermal distribution were shown at 1 p.m., but there was no significant difference between a thermal distribution at 1 p.m. and that at 5 p.m. since a heat flux from buildings affects thermal distributions rather than insolation does. 2. Tree planting or adding environmental friendly factors might lead a temperature drop effect, but the effect was not significant for areas covered with impermeability packing materials such as concrete or asphalt (especally, for Site case 2) 3. The combination of tree planting and adding environmental friendly factors also brought a temperature drop effect (Site 1 and 2) and this case showed even better result if green spaces (especially, parks) were closed.

• The Korean Journal of Ecology
• /
• 제13권2호
• /
• pp.149-163
• /
• 1990

Two distinct spider communities were studied in the crowns and ground surfaces of pine plantations at Mt. Ungilsan, Kyonggi-do using pitfall traps and knock-down by spraying of an insecticide (D.D.V.P.) to sample spiders. There were 34 species of 11 families in the ground community and 41 species of 15 families in the crown community, with only 9 species being collected in both. Wandering spiders comprised 78.5% of the crown community and 90.8% of the ground community. Guild abundance and the most abundant families were distinctly different in the two habitats: agile hunters (Salticidae:32.4%) and nocturnal hunters (Clubionidae:19%) in the crown, runners (Lycocidae:32.8%) and nocturnal hunters (Gnaphosidae:31.2%) in the ground. Dominant species were Clubiona jucunda (Karsch) and Mymarachne japonica (Karsch) in the crown, while in the ground they were Pardosa laura Karsch and Gnaphosa silvicola. Species diversity(H ) had peaks in May, July and November in the ground community, while in the crown community peaks were in June and September. The seasonal trends of species diversity (H ) were due mainly to differences in the number of species and the numbers of individuals collected at each sample date rather than to differences in equitability among species. Spier guilds and dominant species have different seasonal patterns based on the temporal differences in prey availability in the two communities and the reduction of temporal overlap.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.60-63
• /
• 2013

Recently, Silicone that one of the thermo-sets is used to making optical products such as LED lenses because of excellent thermal properties. LED lenses are required to keep the precise dimensions, so they must be molded to have the minimum deformation. Thermo-sets have the expansion characteristic on the part of thermal property, it is important to optimize the cure condition so that the deformation of the part become minimum. In this study, to investigate the relationship between the shrinkage by the curing and expansion by the thermal properties of the resin, reactive injection experiment was performed by setting the variables such as mold setting temperature, cure time. As a result, it was confirmed that there was a interval while the thermal properties were transferred to more active during the cure process. It is expected to help in determining the reactive injection molding conditions of the thermo-set parts as well as LED lens in order to reduce the amount of deformation.

• 대한의용생체공학회:의공학회지
• /
• 제31권1호
• /
• pp.33-39
• /
• 2010

During running, the human body experiences repeated impact force between the foot and the ground. The impact force is highly associated with injury of the lower extremity, comfort and running performance. Therefore, shoemakers have developed shoes with various midsole properties to prevent the injury of lower extremity, improve the comfort and enhance the running performance. The purpose of this study is to investigate influence of midsole hardness on shock absorption along the human body during running. Thirty two expert runners consented to participate in the study and ran at a constant speed with three different pairs of shoes with soft, medium and hard midsole respectively. Using accelerometers we measured the shock absorption from shoe heel to cervical vertebral column. In conclusion, at the shoe heel, shock was the greatest with the hard midsole. However because most shock was absorbed between shoe heel and the knee, notable influence of midsole was not detected upper knee. At shoe heel, regardless of midsole hardness, the shock of younger female was the greatest. The authors expect to apply this result for providing a guideline for utilizing proper midsole hardness for manufacturing age and gender-specific shoe.

• 대한정형외과스포츠의학회지
• /
• 제7권2호
• /
• pp.142-145
• /
• 2008

육상 선수나 격투기 선수들에게서 전족부 손상은 흔한 편이나 족무지 지간 관절은 해부학적 안정성으로 인해 관절 측부 인대손상은 매우 드문 것으로 알려져 있다. 특히 스포츠 손상에 의한 지간 관절의 만성 불안정성에 대해서는 국내외적으로 보고가 극히 적어 저자들은 대학 태권도 선수에서 족무지 지간 관절의 진구성 외측부 인대 파열에 기인한 만성 무지 내반 불안정성에 대하여 수술적으로 치료하여 좋은 결과를 얻었기에 이를 보고하고자 한다.