• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.431-439
• /
• 2004

In this paper, we present an effective method for process control using the Demerit-EWMA control chart in the process where nonconforming units or nonconformities are occurred by various types. We compare performance of Demerit control chart, Demerit-CUSUM control chart and Demerit-EWMA control chart based on the average run length(ARL).

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.7
• /
• pp.357-362
• /
• 1999

This paper presents a speed control method for the capacitor-run induction motor. The equivalent circuit of the motor is analyzed using the forward(Positive sequence) and backward(negative sequence) components, and simple circuit equations are obtained. Simulations for the speed control are performed by adjusting the voltage magnitude of the auxiliary winding. A prototype system has been implemented which consists of an inverter and a controller with TMS320C31 digital signal processor. The experimental results using 1/4hp capacitor-run induction motor show a good agreement with analyses.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.452-458
• /
• 2016

The study on pH control at the themophilic solubilization (pretreatment process) was investigated in order to improve the methane gas production of two phase anaerobic digestion of food waste. From a batch experiment, it was observed that the solubilization efficiency was increased from 26.2% to 47.1% and 55.6% by the pH increament from $4.20{\pm}0.40$ (without pH control) to $7.00{\pm}0.50$, and $12.00{\pm}0.50$, respectively. However there was immaterial increase (8.5%) in solubilization efficiency when the pH was increased from $7.00{\pm}0.50$ to $12.00{\pm}0.50$. The two phase anaerobic digestion system was operated for laboratory scale experiment under the solubilization condition of pH $4.20{\pm}0.40$ (Run1) and $7.00{\pm}0.50$ (Run2). Higher soluble chemical oxygen demand (SCOD) and total volatile fatty acid (TVFA) concentration were observed in Run2 throughout the system resulted by the solubilization effect at the pH $7.00{\pm}0.50$. The TVFA concentration in acidogenic reactor was 18.4 g/L which was 1.8 times higher than the result of Run1. Consequently the methane gas production was enhanced to 0.333 L/g VS in the methanogenic reactor, which is 18% higher than the result (0.282 L/g VS) of Run1.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.2
• /
• pp.62-67
• /
• 2000

The uniformity of temperature on a wafer is one of the most important parameters to control the RTP (Rapid Thermal Process) with proper input signals. Since it is impossible to achieve the uniformity of temperature without exact estimation of temperature at all points on the wafer, the difficulty of understanding internal dynamics and structural complexities of the RTP is a primary obstacle to accurately measure the distributed temperatures on the wafer. Furthermore, it is also hard to accomplish desirable estimation because only few pyrometers have been commonly available in the general equipments. In the paper, a thermal model based on the chamber geometry of the AST SHS200 RTP system is developed to effectively control the thermal uniformity on the wafer. First of all, the estimation method of one-point measurement is developed, which is properly extended to the case of multi-point measurements. This thermal model is validated through certain simulation and experiments. The work can be usefully contributed to building a run-by-run or a real-time controls of the RTP.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.6151-6158
• /
• 2013

Radio frequency ablation (RFA) is an effective means of achieving local control of liver cancer. It is a particularly suitable mode of therapy for small and favorably located tumors. However, local progression rates are substantially higher for large tumors (>3.0 cm). In the current study, we report on a mathematical model based on geometric optimization to treat large liver tumors. A database of mathematical models relevant to the configuration of liver cancer was also established. The specific placement of electrodes and the frequency of ablation were also optimized. In addition, three types of liver cancer lesion were simulated by computer guidance incorporating mathematical models. This approach can be expected to provide a more effective and rationale mechanism for employing RFA in the therapy of hepatic carcinoma.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.20-26
• /
• 2005

Various kinds of practical machines using the single phase induction motor (SPIM) are utilized to control both speed and torque. In particular, the capacitor-run type SPIM has the characteristic that allows the motor torque to be altered by auxiliary capacitance variation. In this study, we manifest an equivalent model having a more simplified configuration, and clarify the relationship between torque and capacitance. Also, we design an experimental controller that is able to perform speed control with ease by the phase angle control of the AC input voltage. Validity of this study is confirmed through the simulation and experimental results obtained.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.2
• /
• pp.143-149
• /
• 2020

Low inflation and sustainable growth have been the major macroeconomic goals being pursued by every developing country, Vietnam inclusive. The effect of inflation on economic growth has been intensively analyzed by a variety of studies, but the empirical evidence more often than not remains controversial and ambiguous. One common hypothesis of previous studies is that they have assumed that the effect of inflation on growth is symmetric. The main purpose of this study is to investigate the asymmetric effect of inflation and money supply on economic growth using the Nonlinear Autoregressive Distributed Lag approach introduced by Shin, Byungchul, and Greenwood-nimmo (2013) for Vietnam over the period 1990-2017. Empirical results provide evidence that the effects of inflation on economic growth are negative and asymmetric in the long run. The impact of money supply on growth is positive in both the short-run and long-run. Accordingly, the impact of the increase in the inflation rate is bigger than the decreasing in the long-run. This different impact is significant and high inflation will destruct economic activities. As a result, the study provides empirical evidence for the authorities to plan monetary policies and control the rate of inflation to achieve sustainable economic development in the long-run.

• Coupled systems mechanics
• /
• v.4 no.2
• /
• pp.157-172
• /
• 2015

Control of potable water treatment plant (PWTP) is nowadays based on experience. The aim of this article is to show that model based control of treatment process is more efficient than process operation based on experience. Stimela environment is used for modeling of processes of potable water treatment. Application of the model was conducted on PWTP "Crkvice" in Zenica (BiH). This plant has used conventional rapid sand filters. By effective application of the model it is determined the optimal filter run time for different input turbidity of raw water. This results in the possibility of reducing the consumption of backwashing water, lower costs for its pumping and reducing the amount of coagulants. In the existing practice, based on experience, these benefits are not used.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.3-5
• /
• 1998

This paper presents a speed control method for the capacitor run single-phase induction motor. The equivalent circuit of a capacitor motor is analyzed using the forward and the backward components, and simple circuit equations are obtained. Simulations for the speed control are performed by adjusting the voltage magnitude of the auxiliary winding.