• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제22권4호
• /
• pp.261-282
• /
• 2019

The research related to testing pupils' achievement in the field of Measurement and Measure in initial teaching of geometry points to an insufficient adoption of the basic components of the length measurement concept among pupils. In order to discover the cause, we looked at the basic components on which the procedure of measuring length using a ruler is based, highlighted the possibilities of introducing the procedure in measuring length, and determined pupils' achievement during the procedure of measuring length using a ruler. The research sample consisted of 145 pupils, out of which 72 were the 2^nd grade pupils and 73 were the 4^th grade pupils. A descriptive method was applied in the research. The technique we used was testing, and for the statistical data processing we used a χ² test. The results of the research show that, when drawing a straight line of a given length using a ruler, there is no statistical difference in achievement between the 2^nd and 4^th grade pupils, nor in the pupils' knowledge regarding drawing a ruler independently, while drawing a straight line of a given length using a "broken" ruler 4^th grade pupils are statistically better. The results of the research indicate that pupils' achievement is better in doing standard tasks than in non-standard ones, given that the latter require conceptual knowledge. The components of the concept of length measurement using ruler have not been sufficiently developed yet, and these include: zero-point, partitioning a measured object in a series of consecutive measurement units and their iteration. We shed more light on the critical stage in the procedure of length measurement - the transition from non-standard to standard units and the formation of the length measurement scale. For further research, we propose to look at the formation of the concept of length measurement using the ruler through all its components and their inclusion in the mathematics curriculum, as well as examining the correlation of pupils' achievement in the procedure of measuring length with their achievement in measuring area (and volume).

• Korean Journal of Acupuncture
• /
• 제25권2호
• /
• pp.107-114
• /
• 2008

Objectives : Accurate location of acupoints is a prerequisite for both practice and research into acupoint specificity. Given that accurate location of acupoints is one of the most important issues in meridianology education, this study aimed at evaluating if the elastic ruler method for locating acupoints is suitable for meridianology practice class. Methods : Fifty-six students who took meridianology practice class participated in the experiment. Firstly, they were asked to locate PC6, CV12 and ST36 without any assisting tools and the distance between standard acupoint and their acupoint location was measured. Secondly, they were again asked to locate the same points this time with an elastic ruler. Then the first and second measurements were compared using a paired t-test. Results : Analysis of the results found using an elastic ruler significantly improved the difference between the student's acupoint location and the standard acupoint: there was a significant difference between 1st and 2nd measurements for PC6 (1.87${\pm}$0.29mm vs. 1.28${\pm}$0.19mm, P=0.037) and for ST36 (2.70${\pm}$0.22mm vs. 1.38${\pm}$0.15mm, P<0.0001). Conclusions : Using an elastic ruler as an assisting tool for locating acupoints in meridianology practice class should be considered for improving accuracy in acupoint location.

• 한국컴퓨터정보학회논문지
• /
• 제15권9호
• /
• pp.67-76
• /
• 2010

본 논문은 수위 측정 영역의 오염 상태에 적응적인 영상 기반 수위 계측 기법을 제안한다. 수위를 측정하기 위해 사용되는 목자판이 진흙, 부유물, 조명의 강한 반사에 의해 얼룩진 경우, 목자판 내부의 수평 성분 패턴이 유지되는 영역의 최종 위치와 목자판과 수면의 색상 차를 이용하여 얻어진 대략적인 수위 위치인 참조 수위와의 거리 차를 측정하여 목자판의 오염 여부를 판단하는 기법을 사용한다. 목자판이 오염되지 않은 경우에는 수평 성분이 유지되는 최종 위치의 근방 하단 영역에서 수평 성분의 분포를 분석하여 히스토그램이 가지는 최대값의 30%이상의 값을 가지는 위치를 수위로 검출하고, 목자판이 오염된 경우는 참조 수위 근방의 색상 변화의 국지적인 정점과 골을 검출한 후 그 변화가 가장 큰 위치를 수위로 검출한다. 검출된 영상 수위는 영상에 보이는 목자판의 눈금을 기준으로 생성한 맵핑 테이블을 이용하여 실제 수위로 변환된다. 제안한 방법의 적용 가능성과 일반성을 평가하기 위하여 실제 교량에 측정 시스템을 구축하고 같은 위치에 기존에 설치된 초음파 기반 측정 시스템과 그 측정치를 비교하였다.

• Korean Journal of Acupuncture
• /
• 제24권2호
• /
• pp.61-76
• /
• 2007

Objectives : Accurate and reproducible location of an acupuncture point (AP) have been considered an essential component of meaningful acupuncture research as well as clinical practice. Several kinds of devices have been developed and widely used for the convenience of locating APs. However, the accuracy and convenience of these devices have not been systematically evaluated. The present study was performed to find out the most suitable tools for the location accuracy and location easiness of APs among the devices respectively. Methods : Twenty subjects attempted to locate APs, including PC5 and SP6 in the arm and leg, using four different AP positioning methods: one Conventional Ruler method and three alternative methods including Cunometer, Transparent AP meter, and Elastic Ruler method. The position marked on each AP was plotted onto a thin, flexible, and transparent plastic film, and the dispersion rate of the positions was determined and recorded. The elapsed time for locating each AP was measured. After that each subject was answered to a short questionnaire regarding the degree of convenience and confidence of use of each method for AP location. Results : All of three alternative methods took less time than Conventional Ruler method did. Among these alternative methods, the accuracy of Elastic Ruler method was markedly higher than others. The degree of convenience of the Cunometer and the confidence of Elastic Ruler method were the highest among these alternative methods. Conclusions : The present study indicates that the Elastic Ruler method was the most compatible for the conventional Ruler methods. However, there are many factors need to be reconsidered. Improved devices for locating AP are imperatively needed for clinical practice.

• 건축역사연구
• /
• 제28권5호
• /
• pp.43-58
• /
• 2019

After the study of Fujishima Gaijiro(1930), although it is common to see that the Tang-ruler(唐尺) was used in the construction of the Silla Sacheonwangsa temple(679), the basis of the discrimination of the construction measure and the detection of the unit length is not actually sufficient since conventional research was done before the excavation. The study was based on archaeological results, which was secured through the excavation research(2006~2012) of the temple site in recent years, to determine the construction measure and try to detect the unit length. In the analysis of the measured value of the ruins, the numerical data were obtained through measurements on drawings of the ruins, the tendency of conversion measure's number appearing by dividing each unit length of the Goguryeo-ruler(高句麗尺) and Tang-ruler within a certain range was compared from the Wansu-je(完數制) viewpoint. The research results are summarized as follows : 1)As a result of the analysis of the distance between the site's center, the case that conversion Cheok's(尺) number is converged to the unit of Jang(丈) within the range of unit length expresses three times more in Tang-ruler, and it is confirmed that a simple multiple relationship based on the unit of Jang is established between conversion Cheok's number. 2)As a result of analysis of Bokan(梁間) of the each Corridor site and the measured value of the stonework ruins, it could be confirmed that appears overwhelmingly in the Tang-ruler when conversion Cheok's number becomes an integer within the range of unit length. The results of the analysis are judged to be a clear basis for viewing the Tang-ruler as the construction measure of the Sacheonwangsa temple. 3)The estimated unit lengths of the construction measure that were obtained from the analysis of the distance between the site'scenter, the foundation stone center distance of the building site and the measured value of the stonework ruins are slightly different. There is a limit to the verification of the construction error about this, however it is difficult to specify, it is mentioned 294.37mm which is obtained from the analysis of the distance between the site's center.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.195-198
• /
• 2010

Purpose: The zygoma is a key element which composes the facial contour. Zygomatic fracture induces facial asymmetry. We use radiologic evaluation or inspections mainly for identification of symmetry after reduction depressed zygomatic fracture. But the disadvantages of such methods are time-consuming and complicated process. So we tried to develop a new testing method with a ruler and a level. Methods: In unilateral depressed zygomatic fracture patient, parallel to the patient's head to make sure lay horizontaly. Put the leg of a ruler on the malar eminence so that it is at the same distance from the facial midline. Then take the level of malar eminence as put the level above the ruler. This process was performed before and after the reduction. Results: We were able to fix with plate and screw after checking the results of reduction fast and easily. Good results were obtained at post-operative radiologic evaluation. Conclusion: We can easily get the ruler and level around life. This method is not only simple but also shorttime process compared with other method-radiologic evaluation or inspection. And the operator can explain the results to the patients easily and objectively. Authors obtained the good results with this new method, and would introduce it for another method of identifying the result of reduction in depressed zygomatic fractures.

• 한국학교수학회논문집
• /
• 제11권3호
• /
• pp.513-541
• /
• 2008

본 연구의 목적은 8학년 학생들의 사각형 학습 및 기하학적 추론 능력의 발달을 위해서 GSP의 사용이 자와 각도기 같은 전통적인 도구의 사용보다 더 효과적인지를 탐구하고, 어떻게 그 소프트웨어의 사용이 학생들의 사각형 학습과 추론 능력의 발달에 영향을 끼치는지를 조사하는 것이다. 사후 학업 성취도 검사 결과에 의하면 GSP를 사용한 집단과 자와 각도기를 사용한 집단의 평균 성적에서 통계적으로 유의미한 차이가 발견되었다. GSP를 사용한 집단이 자와 각도기를 사용한 집단보다 유의미하게 높은 평균 성적을 보여주었다. 학생 면접 결과에 의하면, GSP의 사용이 학생들의 기하학적 추론 능력을 발달시키는데 더 효과적이었다. GSP를 사용한 집단의 학생들이 자와 각도기를 사용한 집단의 학생들보다 van Hiele 2와 3수준에서 더 높은 정도의 달성도를 보여주었다. GSP가 제공하는 수학적 개념에 대한 역동적인 시각적 효과와 조작 경험이 학생들이 사각형 학습을 개념적으로 접근하도록 하는데 중요한 역할을 하였고, 그런 경험들이 학생들이 기존에 갖고 있던 수학적 개념에 처한 오류를 확인하고 개념을 재정립하는데 도움을 주었다.

• 한국수학사학회지
• /
• 제21권2호
• /
• pp.119-134
• /
• 2008

본 연구에서는 1709년 러시아에서 출판되었고, 다양한 작도문제의 해결방법이 기술된 '자와 컴퍼스의 방법'을 분석하였다. 이 책에 제시된 정삼각형, 정사각형, 정오각형, 정육각형, 정8각형, 정10각형의 작도방법을 소개하고, 이에 관련된 다양한 논의를 시도하였다. 이를 통해 정다각형 작도에 관련된 역사-발생적 연구를 위한 새로운 자료를 제공할 것으로 기대된다.

• 한국IT서비스학회지
• /
• 제12권4호
• /
• pp.165-174
• /
• 2013

Log scaling which decides a quality grade of log is influence the price of log at the market. It is the one of important works at the field until now. So it remains using a ruler traditionally. This study evaluated the automating program through compared the automating program with using a ruler for log. The automating program used libraries of OpenCV concerning image processing algorithm to measure log diameter for scaling. In addition, it applies two panels of checkered pattern beside a pile of logs and tapes on the surface of a log diameter to find a correct value. We analyzed statistical mean difference of both log diameter and volume. In conclusion, the automating program after applying check panel and taping ins't different using a ruler. Therefore we need to considerate about applying it for improving Forest Administration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.173.2-173
• /
• 2001

In this paper, an Internet-based monitoring system is studied which analyzes visual image of drifted snow and measures the amount of snowing. The system is composed with reference ruler where LED's are attached, a camera, and PC with a controller. The length of the ruler is 1.5m and the interval of the LED's is 1cm. The controller synchronizes the on-off control of each LED with the image frame of the camera. When the snow is accumulated along the ruler, the corresponding LED is blocked and the lowest position of the lighted LED is estimated with this captured image of the camera. Because of week intensity of LED light and light rays of outdoors, it is hard to discriminate which LED is blocked due to snow. Image processing method is used to obtain proper resolution and good accuracy. This system ...