• ETRI Journal
• /
• v.41 no.4
• /
• pp.515-527
• /
• 2019

This paper discusses the design, implementation, and potential use of an ontology-based mobile pediatric consultation and monitoring system, which is a smart healthcare expert system for pediatric patients. The proposed system provides remote consultation and monitoring of pediatric patients during their illness at places distant from medical service areas. The system not only shares instant medical data with a pediatrician but also examines the data as a smart medical assistant to detect any emergency situation. In addition, it uses an inference engine to infer instant suggestions for performing certain initial medical treatment steps when necessary. The applied methodologies and main technical contributions have three aspects: (a) pediatric consultation and monitoring ontology, (b) semantic Web rule knowledge base, and (c) inference engine. Two case studies with real pediatric patients are provided and discussed. The reported results of the applied case studies are promising, and they demonstrate the applicability, effectiveness, and efficiency of the proposed approach.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.4 no.1
• /
• pp.59-65
• /
• 1967

Since the screw propellers were adopted as ship propulsion devices, the replacement of propeller shaft due to damage was mostly of fatigue failure due to the alternative stresses [1],[2]. To prevent such a failure, hence, it is suggested that careful attention should be paid to account of the alternative stresses on the design stage of the propeller shafts. In connection with this fact the Ship Classification Societies' Rules are regarded simply as guidance for preliminary determination of the shaft diameter. In this paper, limiting the topic to the small and medium-sized motor ships, an evaluation of the Rules formulae to a theoretical based on Soderberg's correlation [5] between the factor of safety and the resultant stresses obtained by application of the maximum shear theory is done. For this purpose eleven (11) ships built recently in Korea were taken as a species(refer to table 2. in text). In the end the following conclusions are made: (1) In general the Rules formulae give considerably larger size of the propeller shaft diameter than that derived from theoretical calculation, that is, about 7% more in AB and BV Rules, and about 20% more in LR and KR-NK Rules. (2) LR Rule gives the largest size of all, and AB Rule is mostly closed value to the theoretical. (3) The formular of the AB Rule is considered to be of the simplest in utilization and of the reasonable.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.291-299
• /
• 2012

Ubiquitous computing is a technique to provide users with appropriate services, collecting the context information in somewhere by attached sensor. An intelligent system needs to automatically update services according to the user's various circumstances. To do this, in this paper, we propose a design of context ontology, trigger rule for mining service pattern related to users activity and an active mining architecture integrating trigger system. The proposed system is a framework for active mining user activity and service pattern by considering the relation between user context and object based on trigger system.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.191-200
• /
• 2005

The brilliant achievements in computers and the internet technology make it easy for users to get useful information. But at the same time, the damages caused by intrusions and denial of service attacks are getting more worse. Specially because denial of service attacks by internet worm incapacitate computers and networks, we should draw up a disposal plan against it. So far many rule-based intrusion detection systems have been developed, but these have the limits of these ability to detect new internet worms. In this paper, we propose a system to detect intrusion and generate detection rule against scan-based internet worm, paying attention to the fact that internet worms scan network to infect hosts. The system detects internet worms using detection rule. And if it detects traffic causing by a new scan-based internet worm, it generates new detection nile using traffic information that is gathered. Therefore it can response to new internet worms early. Because the system gathers packet payload, when it is being necessary only, it can reduce system's overhead and disk space that is required.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.65-74
• /
• 2009

The risk of health impairment due to poor ventilation, fire and explosion by inflammable materials, and other unintended occurrences is always present in dangerous workplaces such as manholes, underground septic tanks, storage tanks and confined areas. Therefore, it a system which can monitor harmful working environment through sensors in workplace on a realtime basis and keep workers safe from the risk is needed. This paper has attempted to design an inference engine to monitor harmful environments in the workplace. The proposed inference engine has a rule-based system structure using JESS. This system is not confined to a particular computing platform and is easily interlocked with OSGi-based middleware.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.75-80
• /
• 2005

A design for the front section of an excavator requires kinematic and kinetic mechanism consideration for several configurations. Key parameters for an appropriate configuration can be obtained through a mechanical verification and numerical formulation with a design expert's know-how. In this paper, we propose a knowledge-based system with an expert-shell(CATIA) and Visual Basic to assist for the design of the front section of an excavator. The designers can achieve more efficient design through a CAD model, implemented design knowledge, and a user friendly interface. The implemented design knowledge is retrieved through the whole design process from an early design stage to a detailed design stage based on the multiple levels of abstraction scheme.

• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.77-85
• /
• 2003

The facade design of apartment is getting more important, since residents'needs on raising the quality of housing have increased, and also public interests on urban landscape are higher than before. As a way of improving facade design the necessity of remodeling consequently has been risen. The government also relieves the regulations related to remodeling. A apartment facade design should address how to express both identities and aesthetic tastes of residents, so they want to reflect their own ideas and opinions on the apartment facade design during the remodeling process. It is not always easy, unfortunately, to reflect residents'ideas and opinions due to the public characteristics of apartment facades and absence of tools that support effective design participation. This paper proposes an internet-based collaborative design process that supports residents'active participation in the exterior remodeling process of apartment. We outline three main issues involved in developing the design system: 1) a semantic facade database built upon classification of building facades; 2) an Internet-based facade modeler based on a real-time, rule-based procedural modeling method; and finally 3) the virtual reality(VR) simulation that allows a group of designers and residents to design in a collaborative fashion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.213-217
• /
• 2008

In this paper, a new design method for IMC-PID that adds a phase scaling factor of system identifications to the standard IMC-PID controller as a control parameter is proposed. Based on analytically derived frequency properties such as gain, phase margin and maximum magnitude of sensitivity function, this tuning rule is an optimal control method determining the optimum values of controlling factors to minimize the cost function, integral error criterion of the step response in time domain, in the constraints of design parameters to guarantee qualified frequency design specifications. The proposed controller improves existing single-parameter design methods of IMC-PID in the inflexibility problem to be able to consider various design specifications. Its effectiveness is examined by a simulation example, where a comparison of the performances obtained with the proposed tuning rule and with other common tuning rules is shown.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.5
• /
• pp.393-405
• /
• 2017

This paper deals with the buckling strength of the skirt structure in the spherical LNG carriers. The spherical cargo tank systems consist of spherical tank, skirt, tank cover, pump tower, etc. The skirt supports the spherical cargo tank and is connected with ship hull structure. It is designed to act as a thermal brake between the tank and the hull structure by reducing the thermal conduction from the tank to the supporting structure. It is built up of three parts, upper aluminum part, middle stainless steel part and lower carbon steel part. The 150K spherical LNG carrier was designed and carried out the strength verification under Classification Societies Rule. The design loads due to acceleration, thermal distribution, self-weight and cargo weight were estimated considering requirements of the Class Rule and numerical simulation analyses. Based on the obtained design loads and experienced project data, the initial structure scantling was carried out. To verify the structural integrity, theoretical and numerical analyses were carried out and strength was evaluated aspect of buckling capacity. The results by LR and DNV design code are shown and discussed.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1818-1826
• /
• 2000

This research is one the design and implementation of XSL document authoring system based on the XSL pattern to transform XML document. This system is developed not according to the rule of conventional CSS methods but according to the rule of XSL syntax for document processing language of SML structure. The XSL authoring system supports Korean character documents and is available of various kinds of pattern generations so that it is useful for generation of XSL document. This system is implemented for the environment of Window NT2000 in compatible IBM PC an develops by Visual J++6.0.