• Journal of Information Display
• /
• v.1 no.1
• /
• pp.20-24
• /
• 2000

We propose on a novel vertical configuration (VC) for a helix-deformed ferroelectric liquid crystal (HDFLC) display that has fast response, high contrast, analog gray scale capability, and wide-viewing characteristics. In contrast to a conventional HDFLC in a planar geometry, smectic layers arrange themselves parallel to the substrates, and thus, extremely uniform alignment of molecules in large area is naturally achieved in our new configuration without additional processes such as the rubbing and/or electric field treatment. Moreover, with a proper design of electrode patterns on the same substrate, multidomain switching is easily realized without employing any complex process of alignment. Our new VC-HDFLC is expected to provide a viable technology to produce a next-generation large area LCD suitable for processing the dynamic image at a video-rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1605-1608
• /
• 2006

The contrast ratio, brightness, and uniformity of S-IPS panel, whose alignment process was employed by ion-beam-alignment (IBA) technology, were improved significantly compared with the convention rubbing's panel, because the light leakage has been reduced in dark state effectively. The IBA technology could generate a panel whose pretilt angle was stable and low after post-treatment process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1442-1446
• /
• 2006

In this paper, the response surface modeling of the pretilt angle control in the nematic liquid crystal (NLC) on the homogeneous polyimide surface with different surface treatment is investigated The rubbing strength and the hard baking temperature are considered as input factors. After the design of experiments is performed, the process model is then explored using the response surface methodology. The analysis of variance is used to analyze the statistical significance and the effect plots are also investigated to examine the relationship between the process parameters and the response.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.677-681
• /
• 2013

Apart from the deposition of alignment layer, alignment process needs to be involved for alignment of liquid crystal (LC) molecules. To simplify manufacturing process, several method were used such as rubbing, ion-beam irradiation, UV irradiation, and lithography. But, eventually it needs another treatment for LC alignment. Here, we suggested Si induced polyimide (PI) alignment layer at low temperature. Using this method, we are able to eliminate the alignment process and found that the alignment and electro-optic performance are much better than that of the rubbed PI LC cells. Compared to the rubbed PI cells, the response time was decreased by 70% and C-V characteristics have hysteresis-free.

• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.14-21
• /
• 2009

In this article, silk fabric was treated with silver nitrate ($AgNO_3$) as oxidizing agent, with conditions such as concentration, and treating time, and subsequently treated with reducing agents such as sodium boron hydride ($NaBH_4$) and sodium sulfide ($Na_2S$) to obtain cathodic coloration. After coloration of silk fabric, dyeing properties (K/S value), colorfastnesses such as wash, rubbing and light, and antibacterial activity property were examined. $AgNO_3$ treating time and reducing time did not influence K/S value, whereas the pH value at alkaline region showed a high K/S value of silk fabric. The cathodic colorations of silk fabric with both of reducing agents at $30^{\circ}C$ have excellent color fastnesses. Also the high antibacterial activities were obtained by the treatment with silver nitrate even at 1% of lower concentration.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.21-24
• /
• 2008

Properties of carbon nano fiber (CNF) as field emitters were described. Carbon nano fiber (CNF) of herringbone was prepared by thermal chemical vapor deposition(CVD). Field emitters mixed with organic binders, conductive materials and were prepared by screen-printing process. In order to increase field emissions, the surface treatment of rubbing & peel-off was applied to the printed CNF emitters on cathode electrode. The measurements of field emission properties were carried out by using a diode structure inline vacuum chamber. CNF of herringbone type showed good emission properties that a turn on field was as low as 2.1 $V/{\mu}m$ and current density was as large as 0.15 $mA/cm^2$ of 4.2 $V/{\mu}m$ with electric field. Through the results. we propose that CNFs are suitable for application of electron emitters in Field Emission Devices.

• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.19-27
• /
• 2002

This paper surveys the mordanting and dyeing properties of Sophora japonica L. Appropriate extraction, dyeing and mordanting condition of Sophora japonica L. were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of Sophora japonica L. solution was 367.6mn, rutin solution was 365.6mn. The color of Sophora japonica L. solution was affected at pH 2 and pH 8~9. The optimum temperature to extract Sophora japonica L. was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 10$0^{\circ}C$, 60min. K/S value of dyeing fabrics was increased by pre-mordanting treatment, especially Fe, Sn, Cr. In the case of Sophora japonica L. light fastness was increased by Fe mordanting. Perspiration fastness was better in acidic solution than that in alkaline solution. Fastness to rubbing and dry-cleaning were good in general.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.48-60
• /
• 1999

In this paper, a new regenerated celluosic fiber, "Tencel" was treated with cellulase enzyme. Also Tencel fabrics were pretreated with NaOH and dyed with various reactive dyes, and subsequently finished with DMDHEU. $\Delta{E}^*_{ab}$ value was calculated by measuring color difference before and after wet abrasion test to rubbing. The fibrillation propensity was estimated on Tencel by means of weight loss, $\Delta{E}^*_{ab}$ value, and SEM observation. Weight loss of NaOH pretreated Tencel fabric is more lower than that of original fabric. The cellulase treatment decreased tensile strength but improved wet abrasion strength, wrinkle recovery, and bending properties. Tendency of fibrillation for Tencel fabric was reduced by NaOH-pretreatment, dyeing with multifunctional reactive dyes, and afterfinishing by DMDHEU.by DMDHEU.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.268-274
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on silk fabric were investigated. Pomegranate colorants were characterized by FT-IR analysis. Effects of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. Pomegranate colorants showed high affinity to silk fiber and its isotherm adsorption curve was Langmuir type. Therefore, ionic bond was involved in the adsorption of pomegranate colorants on to silk fiber. Mordants except Fe did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on silk fabric, but the silk mordanted with Fe showed yellow red color. Fastness to washing, perspiration, and rubbing was not improved by mordanting treatment, but light colorfastness was increased by Fe mordant.

• Laser Solutions
• /
• v.18 no.3
• /
• pp.6-8
• /
• 2015

Finishing process includes deburring, polishing and edge radiusing. It improves the surface profile of specimen and eliminates the alien substance on surface. Deburring is the elimination process for debris of edges. Polishing lubricates surfaces by rubbing or chemical treatment. There are two types for electron finishing. The one is using pulse beam. The other is using the convergent and scanning electron beam. Pulse type device appropriates the large area process. But it does not control the beam dosage. Scanning type device has advantages for dosage control and edge deburring. We design the convergence and scan type. It has magnetic lenses for convergence and scan device for scanning beam. Magnetic lenses consist of convergent and objective lens. The lenses are designed by the specification(beam size and working distance). In this paper, we evaluate the convergence performance by pattern process. Also, we analysis the results and important factors for process. The important factors for process are beam size, pressure, stage speed and vacuum. These results will be utilized into systematizing pattern shape and the factors.