• 폴리머
• /
• 제25권4호
• /
• pp.503-511
• /
• 2001

기존 실리카 분산제는 주로 Zn, K의 지방산 유도체이며 지방산과 금속비누의 혼합물은 활성을 높이는데 사용되었다. Zn-K 비누 형태의 실리카 분산제는 탄화수소 사슬의 유동성을 증가시켜 실리카가 함유된 고무 배합물의 점도를 낮추어 주며 그 결과 가공성이 향상된다. 실리카 분산제는 가류 특성에 영향을 미쳐서는 안되는데 Zn-K 비누형태의 분산제는 스코치 및 가류시간을 단축시켰다. 그러나 새로이 개발된 분산제의 경우 금속을 함유하지 않은 non-metal 형태이며 분산제가 실리카와 고무간의 interaction을 유도하여 실리카 분산도를 크게 향상시켰으며 이로 인해 경도 및 점도 저하를 유도하였다. 또한 새로운 분산제는 실리카 고무배합물의 가교특성 및 스코치 안정성에 영향을 미치지 않았다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.9-15
• /
• 2009

There is a growing demand for a high voltage silicone rubber composite with high mechanical property and high electrical property. The effect of modified cross-linking agent on the mechanical, electrical properties, and short-circuit test performance of silicone rubber insulators have been investigated. To use base polymer, the various silicone polymers were prepared by the equilibrium polymerization. Aluminum trihydrate surface was treated by vinyl silane. Liquid silicone rubber nanocomposite was prepared from the compounding of VPMPS, HPDMS, catalyst, and alumina trihydrate modified with 1,3,5-trivinyl-l,3,5-trimethylcyclotrisiloxane. The mechanical property and electrical property for insulation materials were measured, indicating the high tensile strength and the good short-circuit property.

• 한국산학기술학회논문지
• /
• 제6권4호
• /
• pp.285-290
• /
• 2005

고무제품의 기계적 특성은 혼합물 성분, 경화 상태 공정 및 충진제 같은 많은 요소에 기인된다. 우리 연구의 목적은 N-isopropyl-N'-chloro-P-phenylene diamine, 항산화제의 영향을 열적 상태에서 노화 및 오존 균열에 관해 조사하였다. 이 연구에서 항미생물 고무매트의 퇴화가 연구되었는데, 항산화제 함유 및 항산화제가 함유되지 않은 항균매트에 관한 열적 상태의 노화 및 오존 균열을 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.69-74
• /
• 2000

Applicability of Thermal field flow fractionation (ThFFF) was investigated for the analysis of masticated natural rubber (NR) adhesives produced bya hot melt mastication process. An optimum ThFFF condition for NR analysis was found by using tetrahydrofuran (THF) as a solvent/carrier and a field-programming. Low flowrate (0.3 mL/min) was used to avoid stopping the flow for the sample relaxation. Measured molecular weight distribution was used to monitor degradation of rubber during the mastication process. Rubber samples collected at three different stages of the mastication process and were analyzed by ThFFF. It was found that in an anaerobic process rubber degradation occurs at the resin-mixing (compounding) zone as well as in the initial break-down zone, while in an aerobic process most of degradation occurs at the initial breakdown zone. It was also found that E-beam radiation on NR causes a slight increase in the NR molecular weight due to the formation of a branched structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.227-230
• /
• 2003

Silicone rubber has very excellent chemical stability and hydrophobicity. A hydrophobic surface can prevent the formation of continuous water films on the surface in wet and heavily contaminated conditions. This phenomenon contributes to the suppression of leakage current and partial discharges on insulator surfaces. Silicone rubber has been used much for housing materials of polymer insulators. ATH is added to the silicone rubber for improvement of its resistance against surface discharge. In this paper, ATH with different particle size and content was added to the silicone rubber during compounding. Silicone rubber was deteriorated by a corona treatment. Hydrophobicity recovery rate after corona treatment and arc resistance of silicone rubber were investigated. Hydrophobicity recovery rate of silicone rubber was evaluated by the measurement of contact angle. Arc resistance was evaluated by measuring weight loss of silicone rubber after arc resistance test. It was observed that the hydrophobicity recovery rate and arc resistance of silicone rubber were different when different particle size and content of ATH were added.

• 타이어
• /
• 통권6호
• /
• pp.29-34
• /
• 1967

본논고는 필자가 고무에관한 기술연구차 체미시 강의 받은 내용을 초록한 것임

• Elastomers and Composites
• /
• 제11권2호
• /
• pp.113-121
• /
• 1976

Fundamental and specific properties of the tennis ball on rubber ball body are surveyed to match the quality of the tennis ball now on applied in the tennis game, 1. Much dose of filler of non-crystalline or flat form applied to rubber compounding than general procedure and over vulcanization is found excellent in the resistant to gas permeability. 2. Flat curing improved characteristics of the ball on the homogenous rebounds when applied on the specified concrete surface. 3. Satisfactory adhesive power is found with Desmodur R and standard rubber recipe in case of applying on the under-vulcanizate of half sphere. 4. The stable gas-generating compounds of sodiun nitrate, ammonium chloride, water and sodium carbonate, anhydorus help controlling of optimum internal over-pressure in the tall.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.206-209
• /
• 2002

The purpose of this research was to find influence of compounding materials on electrical properties of silicone rubber such as tracking characteristic. The tracking characteristic was tested through controlling the ATH, a widely use anti-tracking agent. Regarding the particle size and coupling agent of ATH, compound silicone rubber with ATH of coupling agent and larger diameter showed better anti-tracking properties. It can be included that ATH of coupling agent use vinyl silane, dispose of tracking characteristic was achieve excellant results.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.129-137
• /
• 2022

Low molecular weight liquid butadiene rubber (LqBR) is a processing aid that can resolve the migration problem of tire tread compounds. Various studies are being conducted to replace the petroleum-based processing oil with LqBR. However, the effect of the loading time of LqBR in the compounding process on silica dispersion and vulcanizate properties is not well known. In this study, we analyzed silica dispersion, vulcanizate properties, and viscoelastic properties of silica-filled tire tread compound according to the processing aid type (TDAE oil, non-functional LqBR) and, silane terminated LqBR) and input timing. In the non-functional LqBR compounds, the 'with TESPT' mixing procedure showed excellent dynamic viscoelastic properties while silane-terminated LqBR compounds showed that the 'after TESPT' mixing procedure was good for 300% modulus and abrasion resistance.

• Elastomers and Composites
• /
• 제37권4호
• /
• pp.234-243
• /
• 2002

A general scheme of a rubber structure is proposed. Using the thermomechanical method(TMA), some changes in the molecular and topological structures for uncured and cured, and unfilled and filled rubbers during processing are shown. In our investigations as region it is understood a complex structure, which is expressed at the thermomechanical curve(TMC) as a zone differed from others in thermal expansion properties. This zone is between the noticed temperatures of relaxation transitions, usually on the level like those determined by DMTA at 1Hz. These regions, which shares, are not stable, and differ in molecular-weight distribution(MWD) of chain fragments between the junctions. Differences in dynamics of the formation of the molecular and topological structures of a vulcanizate are dependent on the rubber formulation, mixing technology and curing time. Some of characteristics of these regions correlate with mechanical properties of vulcanizates what is shown for NR rubbers containing ENR or CPE as a polymeric additive. It is well known that the state of order influences diffusivity of low-molecular substances into the polymer matrix. Because of this, the two topological amorphous regions should influence the distribution of the ingredients and resulting in rubber compounds' heterogeneity, and related properties of cured rubber. Investigation of this problem is expected to be, in the future, one of the essential factors in determining further improvement of polymeric materials properties by compounding with additives and in reprocessing of rubber scrap.