• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.4
• /
• pp.311-320
• /
• 2019

This study aimed to optimize mixing conditions (adding amount of squid skin and sea tangle Saccharina japonica) for concentrates of octopus Octopus vulgaris cooking effluent (COCE) and roasting conditions (temperature and time) of seasoned Laver Pyropia yezoensis with concentrates of octopus cooking effluent (SL-COCE) using response surface methodology (RSM). The results of RSM program for COCE showed that the optimum independent variables ($X_1$, squid skin amount; $X_2$, sea tangle amount) based on the dependent variables ($Y_1$, odor intensity; $Y_2$, amino-N content; $Y_3$, sensory overall acceptance) for high-quality COCE were 0.53% (w/w) for $X_1$ and 0.48% (w/w) for $X_2$ for uncoded values. The results of the RSM program for SL-COCE showed that the optimum independent variables ($X_1$, roasted temp.; $X_2$, roasted time) based on the dependent variables ($Y_1$, burnt odor intensity; $Y_2$, water activity; $Y_3$, sensory overall acceptance) for high-quality SL-COCE were $344^{\circ}C$ for $X_1$ and 8 sec for $X_2$ for uncoded values. The SL-COCE prepared under optimum procedure was superior in sensory overall acceptance to commercial seasoned laver.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.708-712
• /
• 1998

One hundred and eighty, 1-day old broiler chicks, randomly divided into 15 replicates of 10 brids each were employed to six treatment rations (A, B, C, D, E and F). Rapeseed meal (RSM) with or without treatment was incorporated in the rations at 20 percent level in lieu of soybean meal. The birds in group A were fed soybean based ration and those in group B, C, D, E and F were given ration containing untreated, solvent extracted, water treated, autoclaved and ferrous sulphate treated RSM, respectively. Presence of RSM in the rations whether untreated or treated, significantly reduced weight gain and feed consumption of the birds compared with those of control group but efficiency of feed utilization, dressed weight, dressing percentage and weights of internal organs amongst the groups remained unaffected. The size of thyroid galnds of the broilers using the meal was significantly larger than those having ration without RSM. The only exception was that the birds having solvent extracted meal had similar thyroid gland relative weight as those of control group indicating reduced antinutritional effect of isothiocyanates content due to solvent extraction of the meal.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.9
• /
• pp.1304-1307
• /
• 2001

The laying performance of Japanese quails fed graded levels of high glucosinolate ($92.5{\mu}mole/g$) rapeseed meal (RSM) was assessed. One hundred and twenty Japanese quails aged 1 day-old were assigned at random to four dietary treatments consisting of 0, 50, 75 or 100 g/kg RSM in the diet replacing part of the soybean meal and de-oiled rice bran in a standard quail ration. 12 female representative quails from each diet were selected at random and housed in individual cages from 7-20 wk of age. The egg production, feed intake and FCR was comparable among the different dietary groups. The egg quality characteristics, organoleptic evaluation of boiled eggs as well as the haematological (haemoglobin, total erythrocyte count, total leucocyte count) and biochemical (glucose, protein, cholesterol, aspartate amino transferase, alanine amino transferase and alkaline phosphatase) constituents did not differ significantly among the groups. The gross and histopathological studies of vital organs did not reveal any appreciable changes. The feed cost was reduced by the incorporation of RSM in the diet, but only the production cost of quails fed the 75 g/kg RSM was lower in comparison to other groups. In the present study, the laying potential of Japanese quail was well-maintained up to the 100g/kg dietary level of rapeseed meal.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.151-154
• /
• 2002

This paper presents an implementation of high-dynamic performance control system of Reluctance Synchronous Motor(RSM) drives for an industrial servo drive system with direct torque control(DTC). The estimation of the stator flux and torque are obtained by using flux observer which a saturated inductance Ld and Lq of d-q axises can be compensated by using the neural network from measuring the modulus and angle of the stator current space vector. To obtain fast torque response and maximum torque/current, the reference command flux is ensured by imposing Ids=Iqs. The control strategy is proposed to fast response and optimal efficiency for RSM drive. The developed digitally high-performance control system are shown a good response characteristic of control results and high performance features using 1.0kW RSM.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.1
• /
• pp.51-57
• /
• 2007

The aim of this study was to improve rice muffin quality with sorbitol using response surface methodology(RSM). Response surface experimental design was made by central composite design using several independent factors. In preliminary experiment of chlorella rice muffin, rice flour(RF), chlorella(CH) and sorbitol(SO) were chosen as independent factors. Response factor was the overall acceptability obtained from sensory evaluation. The regression model equation could be predicted as $OV=6.70-0.45CH-0.44RF^2-0.81CH^2-0.60SO^2$. The optimal conditions for chlorella rice muffin substituted with sorbitol were determined to be 60.8% of RF, 4.7% of CH and 35.45% of SO. Rice muffin was superior to flour muffin in sensory evaluation using the prediction value derived from RSM. Therefore, the optimum condition of muffin could be developed by RSM.

• Journal of Power Electronics
• /
• v.2 no.2
• /
• pp.146-153
• /
• 2002

this paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The problem of DTC for high-dynamic performance RSM drive is generating a nonlinear torque due to a saturated nonlinear inductance curve with various load currents. The control system consists of stator flux observer, compensating inductance look-up table, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source unverter, and TMS320C31 DSP controller. The stator flux observer is based on the combined voltage and current model with stator flux feedback adapitve control that inputs are the compensated inductances, current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operation area. It does not requrie the knowledge of any montor paramenters, nor particular care for moter starting, In order to prove the suggested control algorithm, we have simulation and testing at actual experimental system. The developed sensorless control system is showing a good speed control response characterisitic result and high performance features in 20/1500 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.135-141
• /
• 2002

This paper presents an implementation of high-dynamic performance of position sensorless motion control system of Reluctance Synchronous Motor(RSM) drives for an industrial servo system with direct torque control(DTC), The problems of DTC for high-dynamic performance and maximum efficiency RSM drive due to a saturated stator linkage flux and nonlinear inductance curve with various load currents, The accurate estimation of the stator flux and torque are obtained using stator flux observer of which a saturated inductance Ld and Lq can be compensated by adapting from measurable the modulus and angle of the stator current space vector. To obtain fast torque response and maximum torque/current with varying load current, the reference command flux is ensured by imposing Ids=Iqs. This control strategy is proposed to fast response and optimal efficiency for RSM drive. In order to prove rightness of the suggested control algorithm, the actual experiment carried out at ${\pm}$20 and ${\pm}$1500 rpm. The developed digitally high-performance control system are shown some good response characteristic of control results and high performance features using 1.0kW RSM of which has 2.57 Ld/Lq salient ratio.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.321-339
• /
• 2021

Response Surface Method (RSM) has been widely used for flammable cloud size prediction as it can reduce computational intensity for further Explosion Risk Analysis (ERA) especially during the early design phase of offshore platforms. However, RSM encounters the overfitting problem under very limited simulations. In order to overcome the disadvantage of RSM, Bayesian Regularization Artificial Neural (BRANN)-based model has been recently developed and its robustness and efficiency have been widely verified. However, for ERA during the early design phase, there seems to be room to further reduce the computational intensity while ensuring the model's acceptable accuracy. This study aims to develop an integrated method, namely the combination of Center Composite Design (CCD) method with Bayesian Regularization Artificial Neural Network (BRANN), for flammable cloud size prediction. A case study with constant and transient leakages is conducted to illustrate the feasibility and advantage of this hybrid method. Additionally, the performance of CCD-BRANN is compared with that of RSM. It is concluded that the newly developed hybrid method is more robust and computational efficient for ERAs during early design phase.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.37-42
• /
• 2012

This study investigated the use of Geobacter lovleyi with TBOS(Tetrabutoxysilane) for TCE(Trichloroethylene) dechlorination. The TCE dechlorination by Geobacter lovleiy was mathematically described as the independent variables such as initial concentration of TCE, protein mass of Geobacter lovleyi and initial concentration of TOBS, and these were modeled by the use of response surface methodology(RSM). These experiments were carried out as a Box-Behnken Design(BBD) consisting of 15 experiments. The application of RSM yielded the following equation, which is empirical relationship for the dechlorination efficiency($Y_1$, %) of TCE and first order kinetic constant of TCE($Y_2,\;d^{-1}$) by independent variables in coded unit : $Y_1=-11.50X_1$(initial concentration of TCE) + $4.25X_2$(protein mass as Geobacter lovleyi injected mass) - $4.75X_3$(initial concentration of TBOS) - ${6.58X_1}^2$ - ${8.58X_2}^2$ + 93.67, $Y_2=-10.92X_1+5.06X_2-4.89X_3-{4.93X_3}^2-2.19X_1X_2+2.54X_1X_3-2.19X_2X_3+16.71$. In this case, the value of the adjusted determination coefficient(adjusted $R^2$= 0.975 and 0.934) were closed to 1, showing a high significance of the model. Statistical results showed the order of TCE dechlorination at experimental factors to be initial TCE concentration > initial TBOS concentration > protein mass, but the interaction effects were non-significant.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.18-21
• /
• 2004

This paper presents the optimization for shape design of a field coil used High Temperature Superconducting Motor (HTSM). In materials of HTSM, critical current Ic is more sensitive to magnetic fields directed along the axis or the unit cell ($B_{\bot}$). Thus, in the shape design of the HTS magnet. the maximum $B_{\bot}$ should be reduced to limit Ic. In order to reduce the maximum $B_{\bot}$, the shape optimization of the magnet, which is used for the field coil of HTSM, is necessary. It can be accomplished by using Response Surface Methodology (RSM). Finally, the result of RSM is verified by comparison with these experimental results.