• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.431-444
• /
• 2018

Numerical simulations have been conducted to study the unstart/restart characteristics of an over-under turbine-based combined-cycle propulsion system (TBCC) inlet during the inlet transition phase. A dual-solution area exists according to the Kantrowitz theory, in which the inlet states may be different even with the same input parameters. The entire transition process was divided into five stages and the unstart/restart hysteresis loop for each stage was also obtained. These loops construct a hysteresis surface which separates the operating space of the engine into three parts: in which a) inlet can maintain a started state; b) inlet keeps an unstarted state; c) inlet state depends on its initial state. During the transition, the operation of the engine follows a certain order with different backpressures and splitter angles, namely control route, which may result in disparate inlet states. Nine control routes with different backpressures and transition stages were designed to illuminate the route-dependent behavior of the inlet. The control routes operating towards the unstart boundary can make the inlet transit from a started state into an unstarted one. But operating backward the same route cannot make the inlet restart, additional effort should be made.

• 경영과정보연구
• /
• 제29권4호
• /
• pp.109-121
• /
• 2010

본 연구는 전형적인 차량경로 문제에서 각 노드간의 이동 시간이 일정하지 않은 특수한 경우의 상황에 대한 해법 절차를 제공한다. 본 연구는 상황에 따라 변화하는 이동시간을 갖는 외판원 문제의 특별한 경우인 '한 노드까지 도달한 경로가 다음 노드로 이동하는 데 걸리는 시간에 영향을 주는 외판원 문제'(경로의존 이동비용을 갖는 외판원 문제(RDTSP: Route Dependent Travelling Salesman Problem))의 해법을 제시한다. RDTSP 문제의 해결을 위해 먼저 문제 상황을 묘사하는 정수 계획 모형을 개발하였다. 본 연구에서 제시한 정수계획 모형에서는, 모든 가능한 경로에 대하여 각각의 경로를 하나의 변수로 정의하고 이 변수들 중에서 하나를 선택하는 형태로 개발되었다. 이 모형에서는 변수에 해당하는 가능한 경로의 수가 노드수에 지수적(exponentially)으로 증가하기 때문에, 처음부터 모든 변수를 문제에 포함시켜 풀 수 없게 된다. 그러나, 개발된 정수계획 모형의 변수를 실수로 완하시킨 선형완화(LP relaxation) 문제에 대해서는 열 생성(column generation) 기법을 통해 그 해를 구할 수 있다. 또한 본 연구의 결과가 PCB 조립 공정의 작업시간 최적화 문제에 어떻게 적용될 수 있는가를 제시한다.

• 대한교통학회지
• /
• 제13권4호
• /
• pp.5-29
• /
• 1995

Advanced Traveler Inoformation Systems*ATIS) , as a subsystem of ITS influence the travel choices of dreivers by providing them with historical, real-time and predictive information to supprot travel decisions and consequently improves the speed and quality of travel. For thesuccessul accomplishment of ATIS, the time-dependent variations of traffic in a road network and travel times of vehicles during their journey must be predicted . The purpose of this study is to evaluate the past developments in the dynamic route choice models and to apply the instantaneous dynamic user optimal route choice model. recently formulated with flow propagation constraints by Ran, Boyce and LeBlanc, to the real transportation network of Seocho-Ku in Seoul. As input data for this application, the time-dependent travel rates are estimated and the link travel time function is derived. The modelis validated from three view points : the efficiency of model itself the ability to predict traffic volume and travel time on links, and the optimal traffic control.

• Asia pacific journal of information systems
• /
• 제18권3호
• /
• pp.147-165
• /
• 2008

IT education can be summarized as persuading the educatee to accept IT. The persuasion is made by delivering the messages for how-to-use and where-to-use to the educatee, which leads formulation of a belief structure for using IT. Therefore, message based persuasion theory, as well as IT acceptance theories such as technology acceptance model(TAM), would play a very important role for explaining IT education. According to elaboration likelihood model(ELM) that has been considered as one of the most influential persuasion theories, people change attitude or perception by two routes, central route and peripheral route. In central route, people would think critically about issue-related arguments in an informational message. In peripheral route, subjects rely on cues regarding the target behavior with less cognitive efforts. Moreover, such persuasion process is not a one-shot program but continuous repetition with feedbacks, which leads to changing a belief structure for using IT. An educatee would get more knowledge and experiences of using IT as following an education program, and be more dependent on a central route than a peripheral route. Such change would reformulate a belief structure which is different from the intial one. The objectives of this study are the following two: First, an identification of the relationship between ELM and belief structures for using IT. Especially, we analyze the effects of message interpretation through both of central and peripheral routes on perceived usefulness which is an important explaining variable in TAM and perceived use control which have perceived ease of use and perceived controllability as sub-dimensions. Second, a longitudinal analysis of the above effects. In other words, change of the relationship between interpretation of message delivered by IT education and beliefs of IT using is analyzed longitudinally. For achievement of our objectives, we suggest a research model, which is constructed as three-layered. While first layer has a dependent variable, use intention, second one has perceived usefulness and perceived use control that has two sub-concepts, perceived ease of use and perceived controllability. Finally, third one is related with two routes in ELM, source credibility and argument quality which are operationalization of peripheral route and central route respectively. By these variables, we suggest five hypotheses. In addition to relationship among variables, we suggest two additional hypotheses, moderation effects of time in the relationships between perceived usefulness and two routes. That is, source credibility's influence on perceived usefulness is decreased as time flows, and argument quality's influence is increased. For validation of it, our research model is tested empirically. With measurements which have been validated in the other studies, we survey students in an Excel class two times for longitudinal analysis. Data Analysis is done by partial least square(PLS), which is known as an appropriate approach for multi-group comparison analysis with a small sized sample as like this study. In result. all hypotheses are statistically supported. One of theoretical contributions in this study is an analysis of IT education based on ELM and TAM which are considered as important theories in psychology and IS theories respectively. A longitudinal analysis by comparison between two surveys based on PLS is also considered as a methodological contribution. In practice, finding the importance of peripheral route in early stage of IT education should be notable.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.329-329
• /
• 1998

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2000년도 제37회 학술발표회논문집
• /
• pp.25-47
• /
• 2000

In route guidance systems fastest-path routing has typically been adopted because of its simplicity. However, empirical studies on route choice behavior have shown that drivers use numerous criteria in choosing a route. The objective of this study is to develop computationally efficient algorithms for identifying a manageable subset of the nondominated (i.e. Pareto optimal) paths for real-time vehicle routing which reflect the drivers' preferences and route choice behaviors. We propose two pruning algorithms that reduce the search area based on a context-dependent linear utility function and thus reduce the computation time. The basic notion of the proposed approach is that ⅰ) enumerating all nondominated paths is computationally too expensive, ⅱ) obtaining a stable mathematical representation of the drivers' utility function is theoretically difficult and impractical, and ⅲ) obtaining optimal path given a nonlinear utility function is a NP-hard problem. Consequently, a heuristic two-stage strategy which identifies multiple routes and then select the near-optimal path may be effective and practical. As the first stage, we utilize the relaxation based pruning technique based on an entropy model to recognize and discard most of the nondominated paths that do not reflect the drivers' preference and/or the context-dependency of the preference. In addition, to make sure that paths identified are dissimilar in terms of links used, the number of shared links between routes is limited. We test the proposed algorithms in a large real-life traffic network and show that the algorithms reduce CPU time significantly compared with conventional multi-criteria shortest path algorithms while the attributes of the routes identified reflect drivers' preferences and generic route choice behaviors well.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.128-136
• /
• 2011

Equal channel angular pressing (ECAP) with intermediate heat treatment was employed to optimize the strength of Cu-15 wt.%Ag. Changes in microstructure, electrical properties and mechanical properties were studied as a function of pressing methods and heat treatment. ECAPed Cu-15wt.%Ag exhibited ultrafine-grained microstructures with the shape and distribution of Ag-rich lamellae dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the initial dendrites of Ag-rich phase were elongated along the shear direction and developed into elongated filaments. For route C in which the sample was rotated by 180 degree after each pass, the morphology of initial dendrites of Ag-rich phase was not much modified and the networked structure remained even after 8 passes of ECAP. For route Bc in which the sample was rotated by 90 degree after each pass, the initial dendrites became finer by fragmentation with no pronounced change of the shape and distribution of Ag-rich lamellae. The strength of Cu-15wt.%Ag ECAPed using route Bc was found to be greater than those ECAPed using route A, suggesting that the substructural strengthening is more effective in strengthening than the interface strengthening.

• 융합보안논문지
• /
• 제19권2호
• /
• pp.73-81
• /
• 2019

본 논문은 시간 가중치 기반의 중간지점 탐색 알고리즘과 사용자 선호 기반 장소 추천 알고리즘을 이용한 사용자 중심의 중간지점 탐색 시스템을 제안한다. 제안된 시스템은 중간지점 탐색을 위하여 사용자간의 출발지점을 기준으로 각 사용자의 시간 가중치를 적용하여 중간 지점을 산출하는 중간지점 탐색 모듈과 각 사용자와 산출된 중간지점까지의 경로 탐색을 제공하기 위한 지점 탐색 제공 모듈로 구성된다. 또한, 중간지점 탐색 결과를 기반으로 사용자의 선호도 중심의 1장소 추천 기능을 포함하여 사용자의 이용률을 증대할 수 있도록 한다. 실험 결과, 제안된 시스템은 사용자 중심의 중간지점 및 장소 추천 기능을 통해 이용의 효율성을 증대시킬 수 있음을 확인하였다.

• 디자인학연구
• /
• 제16권2호
• /
• pp.255-270
• /
• 2003

본 연구의 목적은 루트 커뮤니케이션(Route Communication)에서 랜드마크의 역할을 이론적인 고찰에 의해 밝히고, 기존 길찾기 연구에서 거론되지 않았던 랜드마크의 언어적 요소인 설명용이성에 대한 루트 커뮤니케이션에서의 역할을 찾는데 있다. 이 연구에서 수행된 랜드마크 분석은 랜드마크의 설명용이성(describability)을 확인하고, 랜드마크의 설명 용의성이 루트 커뮤니케이션의 전반적인 과정에서 밀접한 관계가 있다고 가설하였다. 이 연구의 가설을 증명하기 위해 버츄얼 리얼리티(Virtual Reality; H) 실험이 수행되었다. 이 실험의 독립변수는 랜드마크의 설명용이성이고, 가설을 증명하기 위해 루트 커뮤니케이션의 결과인 길찾기에서 피실험자가 소비한 총 시간 등을 측정하였다. 결과는 랜드마크의 설명용이성이 전반적인 루트 커뮤니케이션 과정에 긍정적인 영향을 준다고 보여주었다. 본 논문의 결과를 분석하여 랜드마크의 특성에 다른 언어적 특성이 존재 할것이라는 가능성을 발견하였으며, 인간 행동의 실험 도구로서 의 가상현실 시뮬레이션에 대하여 본 연구의 실험 과정을 토대로 논하고 문제점을 지적하였다. 결론적으로서, 이 연구는 실질적인 루트 커뮤니케이션을 통한 길찾기의 문제에 대한 해결방법을 모색하고 좀더 효율적인 길찾기 기능을 가진 실내 환경을 위한 전제 요소로서의 랜드마크의 실질적 기능과 가능성을 제시하였다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.931-937
• /
• 2012

The microstructure of Cu-15 wt%Ag composites fabricated by equal channel angular pressing (ECAP) with intermediate heat treatment at $320^{\circ}C$ was investigated by transmission electron microscopy (TEM) observations. Ag precipitates with a thickness of 20-40 nm were observed in the eutectic region of the Cu-15 wt%Ag composite solution treated at $700^{\circ}C$ before ECAP. The Cu matrix and Ag precipitates had a cube on cube orientation relationship. ECAPed composites exhibited ultrafine-grained microstructures with the shape and distribution dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the Cu and Ag grains were elongated along the shear direction and many micro-twins were observed in elongated Cu grains as well as in Ag filaments. The steps were observed on coherent twin boundaries in Cu grains. For route Bc in which the sample was rotated by 90 degrees after each pass, a subgrain structure with misorientation of 2-4 degree by fragmentation of the large Cu grains were observed. For route C in which the sample was rotated by 180 degrees after each pass, the microstructure was similar to that of the route A sample. However, the thickness of the elongated grains along the shear direction was wider than that of the route A sample and the twin density was lower than the route A sample. It was found that more microtwins were formed in ECAPed Cu-15 wt%Ag than in the drawn sample. Grain boundaries were observed in relatively thick and long Ag filaments in Cu-15 wt%Ag ECAPed by route C, indicating the multi-crystalline nature of Ag filaments.