• Journal of ILASS-Korea
• /
• v.16 no.2
• /
• pp.97-103
• /
• 2011

The electronically controlled diesel engine was converted to dual fuel engine system. Test engine was set up for investigating the power output, thermal efficiency and emissions. ND 13-mode tests were employed for the engine test cycle. The emission result of dual fuel mode meets Euro-4 (K2006) regulation and the engine performance of dual fuel engine was comparable to the performance of diesel engine. To estimate economical efficiency, test vehicles have been operated on a certain driving route repeatedly. Fuel economy, maximum driving distance per refueling and driveability were examined on the road including free ways. Developed vehicle can be operated over 500 km with dual fuel mode and shows 80% of diesel substitution ratio. Driveability of dual fuel mode is similar with that of diesel mode.

• YAKHAK HOEJI
• /
• v.43 no.3
• /
• pp.316-319
• /
• 1999

Chrysin 7-Ο-crotonate was synthesized by condensing crotonic acid with chrysin in organic solvent, tetrahydrofuran (THF) using dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP). Its structure was indentified by NMR, MS, UV, IR etc. We also investigated the physico-chemical properties and set up the quantitative anytical method of this compound. The correlation coefficient of calibration curve measured at the isobestic point (340 nm) on this compound was approximately 0.9994 by absorption spetrophtometry. Detection limit was 1.6ng at S/N=3 by using a RP column by HPLC. The hair growth effect fo chrysin 7-Ο-crotonate on the hair of black mouse (C57BL/6), was carried out using paste method. When its ethanol solution was administered to this black mouse by route of skin, this compound promoted the growth of hair.

• Carbon letters
• /
• v.11 no.3
• /
• pp.184-191
• /
• 2010

Carbon nanotubes are unique tubular structures of nanometer diameter and large length/diameter ratio. The nanotubes may consist of one up to tens and hundreds of concentric shells of carbons with adjacent shells separation of ~0.34 nm. Multiwalled carbon nanotubes were synthesized by arc-discharge technique. MWCNTs were formed at the cathode deposit along with other carbonaceous materials like amorphous carbon, graphite etc. However, to get the best advantage of carbon nanotubes in various advanced applications, these undesired carbonaceous materials to be removed which is a challenging task. In the present study, various techniques were tried out for purifying MWCNTs such as physical filtration, chemical treatment and thermal annealing. SEM, FTIR, TGA and BET techniques were used to characterize the CNTs at various stages. Results shows that suitable chemical treatment followed by thermal annealing under controlled flow of oxygen gives the better route for purification of carbon nanotubes.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1285-1293
• /
• 2008

Locking sheet is to display the contents of interlocking equipment for safe train drive in stations. It is being used as a basic information for interlocking equipment and for route control condition and the discussion for train operation between related parties. In spite of importance of this, there was no other way except depending on the work by hands from each stage(drawing, examination, discussion, approval) due to non-existing any tool. It is written it takes 30days from drawing to approval by procedures. However, it is required over the days in real time due to argument of each party. Furthermore on drawing of locking sheet, special conditions applied in accordance with situations of each station occasionally are different depending on the person in charge. Therefore, it is urgent to make up Logic Tree to accept special conditions of all stations. Automation Program for Drawing and Examination of Locking Sheet is to improve inefficient interlocking operation which was operated by hands in accordance with custom as automated system. The target of this program is to minimize the processing time and potential errors by personal work and set up standards for Logic Tree of special condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.371-377
• /
• 2013

Fishing boats more than 5 tons is obliged to VHF DSC by Fishing Vessels Act and Vessel Safety Act. The owner of the fishing vessel is equipped to the automatic position reporting device in accordance with the Notice of the Minister of Land, Transport and Maritime Affairs to regulations, shall be ensure to navigations safety and in order to respond quickly in the event of maritime accidents on fishing vessels. East sea set up to start in 2012, which is now underway the annual install plain to the yellow sea and the south sea for VHF coast stations. It is web-based remote operation of DSC on the remote control and monitoring in Fishery Information Communication Station for the coastal VMS construction project. All fishing vessels is VHF DSC in conjunction with the GPS that location information transmitted to the coast station. automatically by the DSC call. This paper has been studied on the communications coverage set up and traffic operation for realization a roaming service by navigation route tracking and RSSI techniques in parallel algorithm refer to VHF DSC coast stations in east sea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1525-1534
• /
• 2014

In recent years, the passengers are likely to decide their route on impulse due to the development of the integrated public transport system, and real-time information system. Especially, public transport fare integration in Seoul Metropolitan area, 2004 makes them not to have resistance about changing the modes or routes and their route choice is most effected by the degree of congestion. Assignment model have limitations to describe route changes by congestion. In this study, the concept of a link cost function used in road assignment and Effective frequency is introduced to describe the passengers' behavior when the capacity of public transport is over and the waiting time variation. Two situations, new transit line operation and accident, are set up to validate the model, as a result of the transit assignment by this model, the traffic on networks is not over the capacity. It is expected that this study will be of help to reflect the various behaviors in transit assignments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.171-179
• /
• 2005

This paper presents the algorithm using fuzzy inference that preestimates each link speed changed by different kinds of road situations. The elements we are considered are time zone, rainfall probability information and lane control information. This paper is consists of three parts. First of all we set up the fuzzy variables, and preestimate link speed changed by various road situations. For this process, we build the membership functions for each fuzzy variable and establish the fuzzy inference relations to find how fuzzy variables influence on link speed. Second, using backtracking method, we search the shortest route influenced by link speed changed by fuzzy inference. Third, we apply this algorithm to hypothetical network and find the shortest path. As a result, it is shown that this algorithm choose appropriate roundabout path according to the changing road situations.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.95-106
• /
• 2015

Unused land is a new load of building and a linear improvement, expanding the loss of function of the road abandoned road construction sites, as well as existing roads is possible additional advantage. However, some space is overcharge checkpoints, materials yard, make this vehicle utilization and maintenance of the unfavorable situation, as vehicle rest area but unused land most of the space required for the use of the system management plan. We are analyzed the location, topographical features, cultural property and in the space which is geospatail open platform set up to classify the type of unused land. Depending on the type of unused land using the geospatial open platform performs a 3D model and a proposed model development and application taking into account the environment and landscape. To derive the Gangwon development Plan and design of future route unused land was becoming helps you make better use of unused land.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.46.4-47
• /
• 2015

Carnegie Hubble Program II (hereafter CHP II) is a large Hubble Space Telescope (HST) observing campaign in the cycle 22 composed of a total of 184 orbits (132 primes + 52 parallels), which aims to measure H0 directly with an unprecedented accuracy. Unlike our previous efforts in CHP I which used Cepheids as a yardstick, CHP II takes the Population II (Pop II) distance indicators such as RR Lyraes and tip of the red giant branch stars (TRGBs) to set up a new calibration to Type Ia supernovae (SN Ia) distance. The Pop II distance scales have two immediate advantages over the classical Cepheid method: 1) The period-luminosity relation of the RR Lyrae has a scatter that is a factor of 2 smaller; 2) The RR Lyrae/TRGB distance scale can be applied to both elliptical and spiral galaxies. This will provide a great systematic benefit by ultimately allowing us to double the number of SN Ia distances based on geometry. By taking advantage of this Pop II route, we expect to measure H0 value to 3 % of error which will be the highest accuracy H0 measurement to date using the "Distance Ladder" method. In this talk I will present a brief background/overview on the CHP II, observations/data acquisition status, and ongoing research progress/preliminary results.