• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• 한국가축번식학회지
• /
• 제8권1호
• /
• pp.46-55
• /
• 1984

The purpose of the experiment was to clarify morphologically normal growth pattern of the ductus deference in accordance with the sex maturity of meat-type cockerels. 1. Diameter of lumens in u, pp.r, mid and lower parts of ductus deferens, the most conspicuous enlargement of lumen was observed in the lower part. Heights of epithelial layers of ductus deferens showed abrupt growth at 12 weeks of age with subsequent gradual growth in all the part of u, pp.r, mid and lower, and heights of those at 30 weeks were a, pp.oximately 4 times as large in the u, pp.r and mid parts and 5 times as large in the lower part in contrast to those at 4 weeks of age. Thickness of muscular layer of ductus showed gradual growth in contrast with the diameter of lumen and height of epithelial layer, showing 1.3 times as large in the u, pp.r part, 1.6 times in the mid part and 1.9 times in the lower part at 30 weeks of age in contrast to the thickness at 4 weeks of age. 2. Within 10 weeks after hatching, lining cells of ductus deferens were mainly composed of round cells and columnar cells in simple columnar epithelium. During 10th to 20th week, the lining cells were mainly composed of high columnar cells and round cells in pseudostratified epithelium. From 22nd week, the lining cells were composed of pseudostratified columnar cells. Whereas round cells disa, pp.ared gradually. Enlargement of lumen and pooling of sperms in ductus deferens coincided with the maturation of seminiferous tubules. 3. In simple correlation between the values of testis weight and the values from various measurements in the ductus deferens, there was significant correlation coefficient with each other. 4. In the India ink absorption test, India ink granules were not absorbed on the epithelium of the ductus deferens, but the granules reactive to acid phosphatase a, pp.ared in a line on the free border of each parts of the ductus deferens. The granules reactive to alkaline phosphatase were noted on the luminal border of ductus deferens mainly, but weak reaction showed than acid phophatase were a, pp.ared. The granules reactive to PAS were a, pp.ared mostly near on the free border of hte epithelial cells of ductus deferens. 5. Number of sperm, Indes of sperm vitality and MRT in the different parts of ductus deferens were tended to be somewhat dominant in the mid and lower parts than in u, pp.r part, even though not significant in the statistical analysis. Ratio of sperm abnormality was tended to be relatively high in the u, pp.r part too, and in the sperm of abnormality blunted head was less in number significantly in the mid and lower part than in the u, pp.r part.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.204-220
• /
• 2007

The background of Korean Ethnical Costume was originated from those northern mounted nomadic groups, which was Scythe style Costume Culture. Through the antique records and paintings of tombs bequests hereby describe the forms of Scythian Cotume (1) Headgear : There was Conical Cap(or Pointed Cap), Feathered Cap, and Crown. (2) Clothes : Both Men and Women wore Jacket as upper garment with leftsided collars, narrow sleeves to the length of the hip line. As lower garment, they wore the tight Trousers and Kungo(:窮袴)that was attached with gusset. (3) Belts and Boots : On the upper garment bound the leather Belts that was hanged a hook that was shaped of animal form at the end. Scythian Buckles was divided into six groups, animal-shaped, animal's head shaped, animal fight-shaped, rectangle-shaped, rectangle openwork-shaped, genre scene shaped Buckle. To the Boots, they wore leather boots. (4) Ornaments : Ornaments divided into Dress Trimming(:Gold plaques), Earrings, Necklaces(;Torques), Bracelets, Rings. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Earrings consisted of a plain ring and pendant ring was a middle ornament hung from it to a pendants which hung was made of heart shaped leaves of the tree, beads-linked. Scythian Torques were divided into several types according to the shape, Torque with Terminal style, Spiral style, Layers style, Crescent-shaped pectoral style, Crown style. Scythian Bracelet were divided into 4 styles according to the shape, Bracelets with ends shaped like beasts style, Spiral style, Layers style, Crown with openwork style. Rings were rhomb-shaped and animal shaped styleRings (5) Animal motifs used in Scythian ornaments appears that in some cases the work was intended to be purely ornamental, while many times the motifs had symbolic meaning (such as the successful dominance of the aggressor over the victim portrayed in the attack scenes). Magical use of symbols may have been inten-ded to guarantee the power of the aggressor.

• The Journal of Korean Physical Therapy
• /
• 제26권5호
• /
• pp.358-364
• /
• 2014

Purpose: Flexed posture commonly increases with age in older women and is characterized by an excessive curvature in the thoracic spine (kyphosis), forward head posture, and decline in height. This study was conducted in order to determine the relationship between flexed posture, physical performance, and psychosocial factors in community dwelling elderly women in Korea. Methods: Fifty-two subjects with thoracic kyphosis of $40^{\circ}C$ or greater participated in this study. Flexed posture was measured using kyphosis angle (KA), forward head posture (FHP), and round shoulder (RS), and physical performance was evaluated using the short physical performance battery (SPPB), grip strength, and static and dynamic balance. Psychosocial factors were measured using depression and the quality of life (QOL). All data were analyzed using SPSS 18.0 software for windows. Results: KA showed significant correlation with SPPB score (r=-0.447) and dynamic balance (r=0.426) (p<0.05) depression (r=0.405) and QOL (r=-0.464) but not with grip strength and static balance in elderly individuals. FHP and RS showed significant correlation with SPPB score (r=0.002, r=-0341) and dynamic balance (r=-0.278, r=0.346) (p<0.05) but not with psychosocial factors. Conclusion: These findings suggest that flexed posture provides meaningful information about physical performance and psychosocial factors in elderly women. Our data suggest that the flexed posture may need to be addressed as part of the health management process for elderly women.

• Parasites, Hosts and Diseases
• /
• 제49권4호
• /
• pp.449-455
• /
• 2011

We detected metacercariae of Echinostoma revolutum in Filopaludina sp. snails purchased from a local market in Nam Dinh Province for the first time in Vietnam. Adult flukes were harvested from experimentally infected hamsters at days 14 and 17 post-infection. The metacercariae were round, $170-190{\mu}m$ (n=15) in diameter, with a cyst wall thickness of about $12{\mu}m$. A total of 37 collar spines were arranged around the head collar, and large excretory granules were seen in 2 canals of the excretory bladder. The 14-day old adult flukes were elongated, ventrally curved, and $5.0-7.2{\times}0.8-1.3mm$ (n=20). The head collar had a total of 37 collar spines arranged in 2 alternating rows, including 5 corner spines on each side. The cirrus sac contained a saccular seminal vesicle, a prostatic gland, and an unarmed cirrus. Two tandem testes were smooth or slightly lobed. Eggs were ovoid to elliptical, $110-118{\times}70-75{\mu}m$. These morphological characters were similar to those of E. revolutum and E. jurini. We tentatively identified it as E. revolutum because the validity of E. jurini remains to be elucidated. The taxonomic relationship of E. revolutum and E. jurini is discussed.

• 복식
• /
• 제23권
• /
• pp.211-223
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the one hundred and ten pictures of the writtened Budist scripture. The costume to study were made about 400 years during the King Mok-jong(1006) to the first year of the king Kong-yang based upon the Avatamaka Sutra and the Sutra of the Lotus. 가) Men's wear : 1. Hair style and hair dress : 1) Man bored a hair and put on the hat such as a Kuan, Kun, and Mo. The young boys binds his hair up one, two, and three knots, and tied up with a hair ribbon. A kinds of hats were Tung-t'ien-kuan(Yuan-yu-kuan) and Chin-hien-kuan and as a court dress. The man wore pok-여 as an official uniform and wore a pok-du , kun-mo as an everyday dress and wore a helmet as a solidier's uniform. 2. Clothes : 1) They wore Yuan-yu-kuan and Chin-hien -kuan as a court dress, and wore belt, boots, pleated decorated ling skirt also. They wore round shape collor big sleeve jacket, small sleeve long coat, belt , boots as an official dress. 2) the soldiers wore helmet, scarf, yangdang-kap , hung-kap, bak-kap, we-yo-kap, kun-kap and jok-kap and carries arms. 3) The young boys bind his hair up one, two and three angle shape an tied up a hair ribbons. 나) Women's wear : 1. Hair Style and hair dress : high rank ladies made their hair top knot (one, two, or more knots) and tied with hair ribbons , and decorated with precious stone, pan shape head dress , wheel shape head dress. 2. Clothes ; 1) high rank ladie's wore kun -kyun attached jacket , and jacket sleeves decorated pleats and pleats decorated on skirt, apron, back apron, knot belt, scarf.

• 한국어류학회지
• /
• 제31권4호
• /
• pp.208-213
• /
• 2019

Aphocypris chinensis 정자의 구조는 잉어류 정자의 일반적인 구조와 비슷하나 핵의 구조, 중심립의 위치, 미토콘드리아의 수와 배열 그리고 편모의 구조에서 차이가 있었다. A. chinensis 정자의 핵와가 기부중심립을 포함하고 있는 것은 잉어류 정자의 공통된 특징으로 볼 수 있다. 섬유성물질에 의하여 원형질막과 연결된 중심립은 말단부중심립의 기저부 위치까지 cytoplasmic canal이 함입되어 있다. 이와 같은 구조는 잉어류의 공통된 특징으로 사료된다. 잉어류 정자의 미토콘드리아의 수를 구분해보면, 4개의 그룹(1개, 2~5개, 6~10개, 11개 이상)으로 구분할 수 있다. A. chinensis는 잉어류 정자에서 지금까지 보고된 미토콘드리아의 수가 가장 많은 종이다. 잉어류 정자에서 나타나는 중편부와 미부에 분포하는 vesicles의 분포형태도 어류 정자의 미세해부학적 분류의 형질로 활용할 수 있을 것으로 사료된다. 편모의 위치가 핵의 측면으로 위치해 있는 것은 A. chinensis를 포함한 대부분 잉어류 정자의 공통된 특징으로 사료된다.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.262-270
• /
• 2007

Of the twelve lytic bacteriophages recovered from five different fermenting cucumber tanks that were inoculated with Pediococcus sp. LA0281, a lytic phage, ${\phi}ps05$, was characterized in the present study. The plaques were mostly clear and round-shaped on the lawn of starter strain, indicating lytic phage. Overall appearance indicated that it belongs to the Siphoviridae family or Bradley's group B1, with a small isometric head and a flexible noncontractile tail with swollen base plate. The average size was found to be 51.2 nm in head diameter and 11.6 nm wide ${\times}$ 129.6 nm long for the tail. The single-step growth kinetics curve showed that the eclipse and the latent period were 29 min and 34 min, respectively, and an average burst size was calculated to be 12 particles per infective center. The optimum proliferating temperature ($35^{\circ}C$) was slightly lower than that of cell growth ($35\;to\;40^{\circ}C$). The structural proteins revealed by SDS-PAGE consisted of one main protein of 33 kDa and three minor proteins of 85, 58, and 52 kDa. The phage genome was a linear double-stranded DNA without cohesive ends. Based on the single and double digestion patterns obtained by EcoRI, HindIII, and SalI, the physical map was constructed. The overall size of the phage genome was estimated to be 24.1 kb. The present report describes the presence of a lytic phage active against a commercial starter culture Pediococcus sp. LA0281 in cucumber fermentation, and a preliminary study characterizes the phage on bacterial successions in the process of starter-added cucumber fermentation.

• Parasites, Hosts and Diseases
• /
• 제59권1호
• /
• pp.47-53
• /
• 2021

Echinostoma mekongi was reported as a new species in 2020 based on specimens collected from humans in Kratie and Takeo Province, Cambodia. In the present study, its metacercarial stage has been discovered in Filopaludina martensi cambodjensis snails purchased from a local market nearby the Tonle Sap Lake, Pursat Province, Cambodia. The metacercariae were fed orally to an experimental hamster, and adult flukes were recovered at day 20 post-infection. They were morphologically examined using light and scanning electron microscopes and molecularly analyzed by sequencing of their mitochondrial cox1 and nad1 genes. A total of 115 metacercariae (1-8 per snail) were detected in 60 (60.0%) out of 100 Filopaludina snails examined. The metacercariae were round, 174 ㎛ in average diameter (163-190 ㎛ in range), having a thin cyst wall, a head collar armed with 37 collar spines, and characteristic excretory granules. The adult flukes were elongated, ventrally curved, 7.3 (6.4-8.2)×1.4 (1.1-1.7) mm in size, and equipped with 37 collar spines on the head collar (dorsal spines in 2 alternating rows), being consistent with E. mekongi. In phylogenetic analyses, the adult flukes showed 99.0-100% homology based on cox1 sequences and 98.9-99.7% homology based on nad1 sequences with E. mekongi. The results evidenced that F. martensi cambodjensis snails act as the second intermediate host of E. mekongi, and hamsters can be used as a suitable experimental definitive host. As local people favor to eat undercooked snails, these snails seem to be an important source of human infection with E. mekongi in Cambodia.

• 대한두경부종양학회지
• /
• 제40권1호
• /
• pp.33-36
• /
• 2024

Pleomorphic adenoma (PA) is a commonly occurring benign tumor originating in the salivary glands. The incidence is mostly in the parotid glands (85%) followed by minor salivary glands (10%). Pleomorphic adenoma from minor salivary glands of the lips is a rare neoplasm. Here, we present a case of a patient with PA in the upper lip, reporting a common neoplasm in a rare site. A 82-year-old male with a slowly progressing swelling that occurred 20years ago on the upper white lip. This tumor is not associated with pain and tenderness. The mass was about 1.5x1.5cm sized, circumscribed, sessile and firm on the external upper lip without oral side bulging (Fig. 1). The tumor was removed completely with a elliptical incision under local anesthesia. The encapsulated mass was measured 0.9x0.9x0.6cm. On histology, a well-circumscribed growth was seen comprising epithelial and stromal components. The epithelial component formed glandular structures lined by round-to oval cells having small nuclei, pink cytoplasm and myoepithelial basal cell layer while the stroma had a fibromyxoid appearance(Fig. 2). Postoperatively wound was well healed without recurrence after 6months. Pleomorphic adenoma of the upper lip is a rare neoplasm, especially not intraoral growth. For aesthetic good result, the mass was removed without hesitation. It is required a high index of suspicion and a long-term follow-up because it could recur and rarely be transformed into malignancy.