• Ocean and Polar Research
• /
• v.39 no.1
• /
• pp.13-21
• /
• 2017

Temporal changes in the number of zooplankton species are important information for understanding basic characteristics and species diversity in marine ecosystems. The aim of the present study was to estimate the optimal monitoring frequency (OMF) to guarantee and predict the minimum number of species occurrences for studies concerning marine ecosystems. The OMF is estimated using the temporal number of zooplankton species through bi-weekly monitoring of zooplankton species data according to operational taxonomic units in the Tongyoung coastal sea. The optimal model comprises two terms, a constant (optimal mean) and a cosine function with a one-year period. The confidence interval (CI) range of the model with monitoring frequency was estimated using a bootstrap method. The CI range was used as a reference to estimate the optimal monitoring frequency. In general, the minimum monitoring frequency (numbers per year) directly depends on the target (acceptable) estimation error. When the acceptable error (range of the CI) increases, the monitoring frequency decreases because the large acceptable error signals a rough estimation. If the acceptable error (unit: number value) of the number of the zooplankton species is set to 3, the minimum monitoring frequency (times per year) is 24. The residual distribution of the model followed a normal distribution. This model can be applied for the estimation of the minimal monitoring frequency that satisfies the target error bounds, as this model provides an estimation of the error of the zooplankton species numbers with monitoring frequencies.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.45-57
• /
• 2014

This study examines subjects' eye movement pattern and surveys their attitudes to the exposed advertisements on the Facebook. Different from the F-shaped pattern of the typical Web pages, users' eye movements on the Facebook have shown a rough H-shape. Even though a large number of users have shown F-shaped pattern on the ordinary Web pages in order to skip the contents of a Web, subjects' eye-movement pattern on the Facebook has H -shaped pattern due to the unique User Interface (UI) of the Facebook. With the right side and vertical arrangement of ads on the Facebook, users skip the page with having a large H-shaped pattern. In addition, this study set four AOIs(Area of Interest) that are advertising sections comprised on the Facebook Web page and measured fixation length within the AOIs then surveyed subjects' attitudes about the exposed ads. Through the experiment and survey, this study offers the optimum advertising position that can attract Facebook users' attention. As the result of experiment and survey, the second ad has the subjects' highest attitude to advertising and fourth ad is the next effectiveness and first and third ad followed. This study highlights the key implications to provide better user experiences(UX) and marketing strategies to users who are the consumers of companies and organizations which have a plan to put their advertising on the Facebook.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.153-167
• /
• 2018

Despite many criticisms that topographic survey data for the official land price appraising collected annually using field survey method might be inaccurate, there is only few concrete research on it. This paper investigated whether the topographic survey data collected by a local government using field survey method is consistent with the data analyzed using the digital elevation model to examine its accuracy. The accuracy analysis indicated that 324 out of 1537 lots of land have inconsistent results which means the ratio of inconsistency is 17.36%. Among 11 areas studied, five had the inconsistency ratio above 20% while the worst one had 38.71%. The inconsistency ratio is generally higher for the rough terrain with irregular slope and high altitude while it is relatively lower for the terrain with smooth landform. The analysis results imply that there are limitations in investigating the topology by field survey method. Therefore, the official land price appraising policy should set precise criterion and change over to highly accurate geographic information analysis method to effectively and accurately examine topology, given the fact that the topology of the Republic of Korea has complicated features with irregular slope and altitude.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.119-128
• /
• 2015

Domestic dominant method in subcontract cost estimate for comprehensive program management is estimation by referencing similar cases or relying on the experience and expertise of the engaged. However, this method is not reliable due to lack of accuracy, making it harder for clients to plan and budget the program. Since budget itself is roughly estimated, it becomes a source of cost rise in the course of management due to design modifications. Therefore, the client and service providers shall calculate more accurate service cost by applying objective and scientific method in order to minimize cost rise and cost related dispute. Traditional cases, in estimating program management cost, took Top-Down approach based on precedents and experience. On the contrary, this study will categorize management structure into phases and activities, issue WBS for each phase to estimated schedule and cost for each code, and take Bottom-UP approach. By taking this approach named ICEP (Integrated Cost Estimate based on Project), Set project typical model will be developed for service cost estimating, calculate cost by applying project-specific factors. Also, by analyzing progress data and allocated management cost to complement them, more efficient construction management will take shape based on program management cost standards which reflect project-specific features.

• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.419-427
• /
• 2006

The purpose of this study is to promote the substitution of rice flour for wheat flour in making bread and thus the consumption of rice by examining the effect of particle size of rice flour on leavening rice bread. For this purpose, several experiments were carried out. With regard to particle size distribution, 59.45% of wheat flour had passed 200 mesh and 3 kinds of rice flour milled to penetrate into 20, 35, and 45 mesh (S1, S2 and S3) had passed 21.88%, 33.1% and 36.38% of those for 200 mesh, respectively. To leaven the rice flour dough to bread, 25% of vital gluten was needed. To determine the optimal water quantity for rice bread dough, the hardness of wheat and rice flour dough was measured by rheometer. The appropriate water quantity for S1, S2 and S3 was set at 285 ml , 295 ml and 335${\sim}$340m1, respectively. The loaf volume index of the wheat flour bread was 6.24, while that of and rice flour bread S1, S2 and S3 was 5.38, 5.50 and 5.75, respectively. These results indicated that the loaf volume index of rice flour bread is lower than that of wheat flour bread, but that the volume of rice flour bread was increased with fuel particle size of rice flour. Scanning electron microscopy (SEM), image of the wheat bread tissue at a magnification of 35 times showed long, large, oval-shaped, air cells and thin cell membrane, as well as small air cells, whereas the images of rice flour showed angular, circular, air cells and rough and thick cell membrane. The size and number of air cells in the rice bread were larger in S2 and S3 with fuel particle flours than in S1. In particular, the bread made with S3 contained many air cells that were as large as those in the wheat bread were. In addition, when the inner cell wall was magnified 1500 times, almost no small air cell was observed in C and S3, whereas many fine air cells were observed in the cell wall of S1 and S2.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.117-126
• /
• 2001

In this research, evaluation of adhesion in tension property of SBR-modified concrete to ordinary portland cement concrete was conducted with uniaxial direct tensile bond test which was proposed by Kuhlmann. A test set-up was fabricated in order to minimize the eccentric force by introducing a joint which might fully rotate. The main experimental variables were cement-latex ratios, surface preparations and moisture levels. The results obtained were as follows: The LMC specimen at 15% latex-cement ratio increased the adhesion in tension by range of 37% compared to that of conventional cement concrete. This might be due to latex film formed between cement paste and aggregate. The effects of surface preparation on bond of latex modified concrete to conventional concrete were significant at the conditions by sand paper and wire brush. A better bond could be achieved by rough surface rather than smooth. The saturated and surface dry (SSD) condition were considered to be the most appropriate moisture level followed by wet, finally by dry. Thus, a proper surface preparation and moisture level are quite necessity in order to obtain better bonding at LMC overlay.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.59-69
• /
• 2007

The scale of a natural disaster grows bigger and bigger every year. The government spends much of its budget on recovering the resulting damage on a national scale. It is important to shift the paradigm from taking measures after a disaster to that of taking preventive actions before a disaster in order to bring a fundamental resolution to such problems. In taking preventive actions and policies, it is necessary to integrate various kinds of advanced technologies including IT, high-tech information gathering technology and operational technology, and to predict and evaluate natural disasters on a comprehensive level. Although Korea is a country with a strong IT sector, most information gathering is still performed in paper. In particular, information about the areas of previous landslide occurrences and slopes remains on paper, which makes it difficult to share the information and to discern the contents, and also raises the possibility of missing documents. Thus this study set out to develop an information gathering and management system for cutting slopes using PDA from the perspective of information gathering, system compatibility, and information management. As a result, field information may be gathered in a variety of forms (location, photos, and texts) real-time. A rough judgment was also made of the stability of rock slopes using the SMR method on the field.

• Journal of Korean Medical classics
• /
• v.19 no.2 s.33
• /
• pp.138-162
• /
• 2006

'On the Morbid Pulse of Abdominal Fullness, Cold Mounting, and Abiding Food' in the Chapter 10 of Synopsis of Golden Chamber that enunciates Abdominal Fullness, Cold Mounting, and Abiding Food is related to the stomach and intestines respectively, and is similar to the region and symptom of disease in the light of both abdominal fullness and symptoms of pain. This chapter was united into one because the formula mentioned in this chapter can be applied to three disease patterns. Abdominal fullness shows the symptoms of distention and unease, but judging from the text as well as a specific formula and symptoms, it follows pain. Accordingly Abdominal fullness dealt with in this chapter is the first consideration and it is a kind of a disease pattern attendant on abdominal pain. Cold Mounting does not mean mounting gi disease but means the abdominal pain. The cause of cold mounting is mainly due to insufficiency of yang gi and oversufficiency of cold evil. And the main symptoms of cold mounting follow the severe pain around the naval and sweating, cold of the extremities, pulse deep and tight. Abiding food is of the same meaning such as damage of food today. Abiding food is now referred to as damage of food. Principles which have set forth in this chapter are put to use of the method of ejection in case that abiding food places in the upper part, precipitation in the lower part. The symptoms of abiding food show that the pulse is slight and slippery and the wrist pulse is both superficial and large and rough in applying the pressure, and the cubit pulse is also slight and superficial as well, and that have diarrhea and have little appetite.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.106-112
• /
• 2017

This paper presents a mathematical model derived from the upper-bound theorem of concrete plasticity to rationally evaluate the shear friction strength of concrete interfaces with a construction joint. The upper limit of the shear friction strength was formulated from the limit state of concrete crushing failure on the strut-and-tie action along the construction joints to avoid overestimating the shear transfer capacity of a transverse reinforcement with a high clamping force. The present model approach proposed that the cohesion and coefficient of friction of concrete can be set to be $0.27(f_{ck})^{0.65}$ and 0.95, respectively, for rough construction joints and $0.11(f_{ck})^{0.65}$ and 0.64, respectively, for smooth ones, where $f_{ck}$ is the compressive strength of concrete. From the comparisons with 155 data compiled from the available literature, the proposed model gave lower values of standard deviation and coefficient of variation of the ratios between predictions and experiments than AASHTO and fib 2010 equations, indicating that the proposed model has consistent trends with test results, unlike the significant underestimation results of such code equations in evaluating the shear friction strength.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2010

In clinical data minig, choosing the optimal subset of features is such important, not only to reduce the computational complexity but also to improve the usefulness of the model constructed from the given data. Moreover the threshold values (i.e., cut-off points) of selected features are used in a clinical decision criteria of experts for differential diagnosis of diseases. In this paper, we propose a fuzzy discretization approach, which is evaluated by measuring the degree of separation of redundant attribute values in overlapping region, based on spatial distribution of data with continuous attributes. The weighted average of the redundant attribute values is then used to determine the threshold value for each feature and rough set theory is utilized to select a subset of relevant features from the overall features. To verify the validity of the proposed method, we compared experimental results, which applied to classification problem using 668 patients with a chief complaint of dyspnea, based on three discretization methods (i.e., equal-width, equal-frequency, and entropy-based) and proposed discretization method. From the experimental results, we confirm that the discretization methods with fuzzy partition give better results in two evaluation measures, average classification accuracy and G-mean, than those with hard partition.