• Journal of Magnetics
• /
• v.6 no.4
• /
• pp.142-144
• /
• 2001

A method to deduce the rotational magnetization curve from experimental magnetization of partially aligned uniaxial anisotropy system has been investigated. The curve obtained by this process has been evaluated quire close to the theoretical magnetization curve compared to that obtained by linear extrapolation from high field data. This new approach offers better accuracy for the determination of magnetic anisotropy by fitting a calculated magnetization curve to the obversed one.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.109-116
• /
• 1997

This paper describes an implementation of the rotational hysteresis analysis using the finite element method and a vector hysteresis model. The vector hysteresis model is extended from the magnetization-dependent Preisach model. The magnetization of each element is calculated for a given history of the rotating field. The lagging angle and the magnitude of the magnetization for an applied field are evaluated. The experimental results show that the magnetization characteristics of the magnetic materials under the rotating field can be analyzed accurately by the proposed method.

• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.178-182
• /
• 2000

We have constructed a rotational loss measuring system which consists of two yoke system for rotational magnetization and 4-channel transient recording system for Hx, Hy, Bx and By measurements. Using the constructed measuring system, we have mesaured rotational energy loss for non-oriented electrical steel sheets. Rotational energy loss was depending on the angle between B-search coil and H-search coil, and the direction of rotation (clockwise and counter clockwise). The average of the rotational energy losses under clockwise and counter clockwise was independent of the angle between B-search coil and H-search coil, and we could improve measuring uncertainty using the averaged rotational energy losses.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.679-682
• /
• 1997

This paper presents finite element analysis algorithm combined with vector hysteresis model for accurate analysis of the hysteresis motor. Magnetization-dependent vector model is adapted to calculate the vector magnetization. That is to say, from the magnitude and direction of the magnetic field intensity, the magnetization of each ring element is computed by the vector model. By comparing the simulation results with the experimental ones, it is found that good results are obtained.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.12-16
• /
• 2005

The $Fe_{87}Zr_{7}B_{6}$ amorphous alloy after neutron irradiation are studied hysteresis loop and complex permeability measurements. The total integration fluence of fast neutrons is varied from $1.92{\times}10^{14}$ to $4.85{\times}10^{16}n_{f1}cm^{-2}$. After neutron irradiation, the imaginary part of complex permeability in low frequency region decreased due to the decrease of wall motion, but the permeability in high frequency region increased due to the enhancement of rotational magnetization. The measurement of hysteresis loop showed the increase of magnetic softness, related to rotational magnetization, but saturation magnetization was decreased in neutron irradiation sample.

• Journal of Magnetics
• /
• v.3 no.2
• /
• pp.41-43
• /
• 1998

The frequency spectra of complex permeability have been measured as a function of ac field amplitude in the annealed amorphous $Fe_{83}Zr_7B_8Cu_2 $ ribbons. The longitudinal permeability results from the rotational magnetization at small fields, $h_o$<5 mOe in as-quenched samples. However, at the further increase of ho, the wall motion begins to be involved in the low frequency region. The permeability from the wall motion drastically decreases in the annealed sample, while that from the rotational magnetization increases up to annealing temperature of 50$0^{\circ}C$ and then drops there after.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.752-757
• /
• 1998

Rotational Magnetization-vector measurements have been performed on a polycrystalline $Y_1Ba_2Cu_3O_{7-\delta}$ sample in field-cooled condition at 4.2 K. The experimental results show that vortex flux density(B) consists of 3 groups :(1) a weak pinning part ($B_w$) which stays at a fixed angle relative to the magnetic field f(H) ; (2) a strong pining part($B_s$) which rotates rigidly with the sample and has same magnitude with the sample rotation, and(3) and intermediated pining part ($B_i$) which rotates rigidly with the sample, but whose magnitude changes with the sample rotation Our results have been explained in terms of a distribution in the strength of the vortex pinning torque and a repulsive intervortex torque.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.49-52
• /
• 2000

The changes of magnetic properties in neutron irradiated F $e_{81}$ $B_{13.5}$S $i_{3.5}$ $C_2$ amorphous ribbon were studied by X-ray diffraction, hysteresis loop, temperature dependence of magnetization and complex permeability. The fluences of thermal ( $n_{th}$) and fast ( $n_{f}$) neutron were 6.95$\times$10$^{18}$ $n_{th}$ c $m^{-2}$ and 4.56$\times$10$^{16}$ $n_{f}$c $m^{-2}$ , respectively. The changes of XRD Profiles were not observable at the neutron irradiated sample. The complex permeability spectra showed that the permeability from domain wall motion decreased due to the increase of pinning force against domain motion by the neutron irradiation, and the relaxation frequency of rotational magnetization moved to higher frequency region. The measurement of hysteresis loop showed the increase of magnetic softness, related to rotational magnetization, but saturation magnetization was decreased in neutron irradiation sample. The Curie temperature was decreased in the neutron irradiated sample.e.e.e.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.47-51
• /
• 1991

Spin-lattice relaxation of methyl protons in 2,6-dichlorotoluene and N-methyl phthalimide, each dissolved in CDCl$_3$, has been studied at 34$^{\circ}$C and the contribution from spin-rotation interaction to the relaxation process has been separated from that due to dipole-dipole interactions among methyl protons. The results show that the spin-rotational contributions to the initial rate of relaxation in 2,6-dichlorotoluene and N-methyl phthalimide amount to 18 and 31%, respectively, of the total relaxation rate at 34$^{\circ}$C. The method of separating the spin-rotational contribution from that of dipolar interactions adopted in this paper is based on the well known fact that in an A$_3$ spin system such as methyl protons in liquid phase dipolar relaxation mechanism gives non-exponential decay of the z-component of total magnetization of protons while the random field fluctuation such as spin-rotational mechanism causes exponential decay.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.633-636
• /
• 1999

In this study, we have fabricated amorphous FeZrBAg thin films with low core losses by using DC magnetron sputtering method. After deposition, rotational field annealing (RFA) method was performed in the dc field of 1.5 kOe. The amorphous FeZrBAg thin films produced by annealing at 35$0^{\circ}C$ was founded to have high permeability of 8680 at 100 MHz, 0.2 mOe, low coercivity of 0.86 Oe high magnetization of 1.5 T and very low core loss of 1.3 W/cc at 1 MHz, 0.IT respectively. Excellent soft magnetic properties in a amorphous FeZrBAg thin films in the present study are presumably the homogeneous formation of very fine bcc $\alpha$-Fe crystalline with the 8.2 nm in an amorphous FeZrBAg thin film matrix.