• 마이크로전자및패키징학회지
• /
• 제18권1호
• /
• pp.29-33
• /
• 2011

전류밀도는 전기도급법에서 생산성과 직접적인 연관이 있고, 생산성의 증가를 위해선 고전류밀도가 필요하다. 회전전극(RDE)의 회전 속도를 증가시키면 고유속을 얻을 수 있다. 유속 조절을 위해 회전전극과 원통형 회전 전극을 사용하였고, 전압과 전류의 관계를 알아보기 위해 정전류, 정전압 실험과 linear sweep voltammetry 실시하였다. 회전 전극의 회전 속도가 400 rpm이상 조건에서, 수소가 발생하지 않고 1000 A/$m^2$이상의 최대전류멸도가 가능하였다. $25^{\circ}C$와 $62^{\circ}C$ 조건에서 구리의 확산계수는 각각 $5.5{\times}10^6\;cm^2\;s^{-1}$와 $10.5{\times}10^6\;cm^2\;s^{-1}$로 계산되었다. 수소가 발생하지 않으면서 안정적으로 구리를 전착할 수 있는 조건은 -0.05 V (vs Ag/AgCl)이었다. 첨가제인 glue와 thiourea-를 넣음으로써 구리의 침상성장을 막을 수 있었다. 표면 거칠기는 UV-Vis Spectrophotometer를 아용하여 분석되었다. 600 nm 영역에서 반사도는 측정 되었고 표면 거철기가 개선될수록 표면 반사도가 증가하였다.

• 한국환경농학회지
• /
• 제32권4호
• /
• pp.279-286
• /
• 2013

본 연구는 시설하우스 당근 연작장해 경감을 위한 녹비작물 재배가 당근의 생육특성 및 수량에 미치는 영향을 알아보기 위한 연구로서 하계녹비작물인 크로타라리아 및 수단글라스를 실제 당근 연작재배지에 단파 및 혼파로 구분하여 파종하였으며, 생육된 녹비작물의 양분공급량을 조사하였고, 녹비작물의 토양환원 후 토양의 이화학적 특성을 조사하였으며, 녹비작물 토양에 환원 후 후작물인 당근의 생육특성 및 당근의 장해율과 상품수량을 조사하여 녹비작물의 당근 연작장해 경감효과를 조사하였다. 시설하우스 당근 연작재배지서 생육된 녹비작물의 질소(N), 인($P_2O_5$), 칼륨($K_2O$), 칼슘(CaO) 및 마그네슘(MgO) 공급량은 크로타라리아의 경우 각각 8.3, 7.5, 4.4, 7.8 및 2.1 kg/10a이었으며, 수단글라스의 경우 각각 8.4, 8.6, 26.8, 0.3 및 2.7 kg/10a이었으며, 혼파의 경우는 단파와 유사한 경향이었다. 당근 연작재배지에서 녹비작물의 토양환원 전 후 토양의 물리학적 특성을 조사한 결과 용적밀도는 녹비작물 처리구가 대조구에 비해 감소하는 경향이었고, 공극률은 증가하는 경향이었다. 토양환원 전 후 토양의 pH는 대조구와 별다른 차이 없이 6.37-6.64 범위였으며, EC는 크로타라리아(2.86 dS/m) 및 수단글라스(2.24 dS/m) 처리구가 대조구(3.14 dS/m)에 비해 낮았다. 토양 중 유기물, T-N 및 avail. $P_2O_5$ 함량은 녹비작물 처리구가 대조구에 비해 증가하는 경향이었다. 녹비작물 토양환원에 따른 후작물인 당근의 총 생산량은 크로타라리아 처리구에서 7,916 kg/10a로 가장 높은 수량을 보였으며, 대조구의 경우는 6,869 kg/10a로 가장 낮았다. 장해율은 대조구, 관행처리구, 크로타라리아, 수단글라스, 수단글라스 + 크로타라리아 처리구에서 각각 34.9, 23.1, 21.4, 22.9 및 19.8%로 혼파 처리구에서 가장 낮은 장해율을 보였다. 당근의 상품수량은 크로타라리아 처리구(6,226 kg $10a^{-1}$)가 관행처리구(5,890 kg/10a) 및 대조구(4,473 kg/10a)에 비해 각각 5.7% 및 39.2%의 증수효과를 보였다. 이상의 결과를 미루어 볼 때, 당근 연작재배지에서 녹비작물의 시용은 비료로서 충분한 가치가 있으며, 녹비작물 토양환원 후 토양의 물리성 및 화학성을 개선함으로써 시설하우스 당근 연작재배지의 연작장해를 경감할 수 있을 것으로 사료된다.

• Journal of Biosystems Engineering
• /
• 제35권3호
• /
• pp.163-168
• /
• 2010

With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권5호
• /
• pp.424-430
• /
• 2005

The oral cavity is humid environment mainly due to the continuous salivary flow. The reaction of oral mucosa to fluid flow is important for homeostasis and pathogenesis. The objective of this study is the screening the change of gene expression after the application of fluid induced shear stress (FISS) on the gingival fibroblast using cDNA microarray assay. The immortalized human gingival fibroblasts were grown and FISS was applied using a cone viscometer at a rotational velocity of 40 rpm, respectively for periods of 2 and 4 hours. The synthesis of cDNA was done from the extracted total RNA and cDNA microarray assay was done subsequently. The genes that showed over 1.6 in the Cy3/Cy5 or the Cy5/Cy3 value were regarded as genes influenced significantly by the FISS application ion (/M/>0.7). The " RUNX-1" was increased its expression in 2 hours group and " RUN and SH3 domain containing 1" was increased its expression in 4 hours group. The "CC020415", "cyclin L1", "interferon regulatory factor1", "early growth response 1", "immediate early response 2", and "immediate early response 3" genes were increased their expression in 2 and 4 hours after FISS application. In conclusion, we could find many genes that were probably related to the FISS application. Interestingly, most of them were placed in similar molecular pathways and these findings improve the reliability of chip data and usefulness in overall screening. From this experiment, we could find many items for further study and it will make improvement in the understanding of intracellular events in response to FISS.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.61-71
• /
• 1994

This study is to investigate the stress distributions, crystal orientations and magnetic properties during die-upsetting according to working temperature of Nd-Fe-B-Cu alloys. The stress distributions in the specimens during compressing process were calculated by a finite element method program(SPID). The calculated stresses were effective stress (${\sigma}_{eff}$), compression stress(${\sigma}_z$), radial direction stress(${\sigma}_r$) rotational direction stress(${\sigma}_e$) and shear stress(${\tau}_{rz}$). The stress distributions of ${\sigma}_z$, obtained by a computer simulation showed that the stress components causing the magnetic alignment during die-upsetting of the cast magnets were very high at the center-part of a specimen, and decreased toward the periphery-part of a specimen. In view of the above results the magnetic properties should be better at the center-part of a specimen than any other parts. But the measured magnetic properties were better at the mid-part. These results should be due to the fact that the specimens were casted. Normally the magnetic properties are affected by the casting process as well as by the stress levels. ${\sigma}_r$, ${\sigma}_e$ are thought to affect the liquid phase flowing and domain patterns, respectively. The influence of ${\tau}_{rz}$ was trivial, ${\sigma}_{eff}$ distributed similar throughout the specimen. The Nd-rich phase appeared at the peripheral of the specimen where the stress level of ${\sigma}_r$, ${\sigma}_z$, was low or the stress level of ${\sigma}_e$ was high. The Nd-rich phase was squeezed out during die-upsetting. This phase had an effect on the crystal orientation and grain growth. The stress distributions of alloy were irregular at the parts of the specimen where the die contacted with specimen.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.521-522
• /
• 2006

In this paper, hybrid air-water discharges were used to develop an optimal condition for providing a high level of water decomposition for hydrogen yield. Electrical and optical phenomena accompanying the discharges were investigated along with feeding gases, flow rates, and point-to-plane electrode gap distance. The primary focus of this experiment was put on the optical emission of the near UV range, with the energy threshold sufficient for water dissociation and excitation. The $OH(A^{2+},'=0\;X^2,"=0$) band's optical emission intensity indicated the presence of plasma chemical reactions involving hydrogen formation. In the gaseous atmosphere saturated with water vapor the OH(A-X) band intensity was relatively high compared to the liquid and transient phases although the optical emission strongly depended on the flow rate and type of feeding gas. In the gaseous phase discharge phenomenon for Ar carrier gas transformed into a gliding arc via the flow rate growth. OH(A-X) band's intensity increased according to the flow rate or residence time of He feeding gas. Reciprocal tendency was acquired for $N_2$ and Ar carrier gases. The peak value of OH(A-X) intensity was observed in the proximity of the water surface, however in the cases of Ar and $N_2$ with 0.5 SLM flow rate peaks shifted to the region below the water surface. Rotational temperature ($T_{rot}$) was estimated to be in the range of 900-3600 K, according to the carrier gas and flow rate, which corresponds to the arc-like-streamer discharge.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.979-984
• /
• 2016

Recently, ball screws have been used in machine tools, robot parts, and medical instruments. The demand for ball screws of high precision and reduced size is increasing because of the growth of high value-added industries. Three types of ball screws are typically used: deflector type, end-cap type, and tube type. They are also classified from C0 to C9 according to the precision level. A deflector type ball screw can reduce the variation of rotational torque and the size of the nut of the ball screw is minimized. To ensure the reliable design of ball screws, it is important to perform a structural analysis. The purpose of this study is to perform a stability evaluation through analysis of a deflector type miniature ball screw for weapon systems. The analysis is performed through Finite Elements Method (FEM) simulation to predict characteristics such as deformation, stress, and thermal effects. The interference between the shaft and the deflector for smooth rotation are also studied. Based on the results of the analysis, the development of the deflector type miniature ball screw for weapon systems is performed.

• 대한치과교정학회지
• /
• 제49권6호
• /
• pp.413-426
• /
• 2019

This study was performed to describe the longitudinal management of recurrent temporomandibular joint (TMJ) ankylosis from infancy to adulthood in perspective of surgical and orthodontic treatment. A 2-year-old girl was referred with chief complaints of restricted mouth opening and micrognathia due to bilateral TMJ ankylosis. For stage I treatment during early childhood (6 years old), high condylectomy and interpositional arthroplasty were performed. However, TMJ ankylosis recurred and symptoms of obstructive sleep apnea (OSA) developed. For stage II treatment during early adolescence (12 years old), gap arthroplasty, coronoidectomy, bilateral mandibular distraction osteogenesis, and orthodontic treatment with extraction of the four first premolars were performed. However, TMJ ankylosis recurred. Because the OSA symptoms reappeared, she began to use a continuous positive airway pressure device. For stage III treatment after completion of growth (20 years old), low condylectomy, coronoidectomy, reconstruction of the bilateral TMJs with artificial prostheses along with counterclockwise rotational advancement of the mandible, genioglossus advancement, and orthodontic treatment were performed. After stage III treatment, the amount of mouth opening exhibited a significant increase. Mandibular advancement and ramus lengthening resulted in significant improvement in the facial profile, Class I relationships, and normal overbite/overjet. The OSA symptoms were also relieved. These outcomes were stable at the one-year follow-up visit. Since the treatment modalities for TMJ ankylosis differ according to the duration of ankylosis, patient age, and degree of deformity, the treatment flowchart suggested in this report could be used as an effective guideline for determining the appropriate timing and methods for the treatment of TMJ ankylosis.

• Archives of Metallurgy and Materials
• /
• 제64권3호
• /
• pp.907-911
• /
• 2019

Effects of various friction stir processing (FSP) variables on the microstructural evolution and microhardness of the AZ31 magnesium alloy were investigated. The processing variables include rotational and travelling speed of the tool, kind of second phase (i.e., diamond, Al₂O₃, and ZrO₂) and groove depth (i.e., volume fraction of second phase). Grain size, distribution of second phase particle, grain texture, and microhardness were analyzed as a function of the FSP process variables. The FSPed AZ31 composites fabricated with a high heat input condition showed the better dispersion of particle without macro defect. For all composite specimens, the grain size decreased and the microhardness increased regardless of the grooved depth compared with that of the FSPed AZ31 without strengthening particle, respectively. For the AZ31/diamond composite having a grain size of about 1 ㎛, microhardness (i.e., about 108 Hv) was about two times higher than that of the matrix alloy (i.e., about 52 Hv). The effect of second phase particle on retardation of grain growth and resulting hardness increase was discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권8호
• /
• pp.1108-1117
• /
• 2003

In Guadeloupe small ruminants (SR) are reared for meat production under pasture conditions. Intensive rotational grazing systems (irrigated, fertilised and high stocked) allow reasonable levels of production but generate high post-grazing residues. Experiments were designed to control them. A system in which residuals were mown (RM) was tested in comparison to the control system (Residuals Remained, RR). The same design was carried out for two years with Creole goat (G) and Martinik sheep (S). An accelerated reproductive rate (3 parturitions over 2 years) was carried out. Systems were compared at three parturition seasons per year(dry, intermediate and rainy seasons). Each group was composed of 20 goats ($36.0{\pm}2.5kg$) or 20 ewes ($46.8{\pm}2.4kg$). The female body traits did not vary according to pasture management and seasons. The stocking rate averaged 1,400 kg LW/ha. The mean fertility rate for does varied significantly (p<0.05) within the kidding season, from $80.4{\pm}0.5%$ to $93.7{\pm}2.9%$ while the mean litter size was $2.30{\pm}0.07$ total kids born. No effect of pasture system was observed. Corresponding values for ewes were $83.2{\pm}12.8%$ vs. $75.6{\pm}12.5%$ (p<0.05) and $2.43{\pm}0.24$ vs. $2.03{\pm}0.29$ (p<0.01) total lambs born for SRM and SRR ewes, respectively. A seasonal effect was observed upon ewe performances. The preweaning mortality of kids and lambs averaged 16.3% and 14.4%, respectively. It was 7 and 9 percentage points more (p<0.01) for RR than for RM kids and lambs, respectively. For both species, weaning took place at an average age of $81.4{\pm}3.6days$. In Creole kids, live weight at birth and at weaning were $1.9{\pm}0.2kg$ and $8.9{\pm}0.8kg$, respectively. In the Martinik sheep, the traits averaged $2.9{\pm}0.2kg$ and $18.9{\pm}0.9kg$. For both traits in both species, significant (p<0.05) group${\times}$season interactions were recorded. The consequences of elimination of post-grazing residues varied according to the SR species, the environmental conditions and the animal physiological status. The forage characteristics were not limiting factors since forage availability in the RM systems (2,300 and 2,600 kg DM/ha, respectively) and chemical composition were at satisfactory levels (CP content averaged 12 and 10%). It is recommended to develop new grazing system which would allow the use of post-grazing residues instead of mowing the refusals.