• Journal of Veterinary Clinics
• /
• v.31 no.5
• /
• pp.425-429
• /
• 2014

Two dogs were presented with a history of anorexia, respiratory distress, or epistaxis. On physical examination, the dogs showed difficulty breathing and open-mouth breathing and large masses were found on the hard palate and soft palate. Cardiac arrest happened in case 2 and the dog was stabilized with cardiopulmonary resuscitation and oxygen therapy. Computed tomography demonstrated that the mass occupied the oropharynx, intrapharyngeal ostium, and laryngopharynx including the hard palate and soft palate in case 1. Palliative surgery was decided to improve swallowing and breathing with owner's consent in two dogs. Buccal mucosal flaps were performed for reconstruction of defects using rotational and single-pedicle advancement flaps and bilateral 90 degree transposition flaps in cases 1 and 2, respectively. Histopathology results described the oral masses as amelanotic melanoma in two dogs. The owners reported that there was normal swallowing and breathing at 7 days postoperatively in two dogs. In case 1, recurrent tumor was identified caudal to the hard palate 4 weeks after surgery. The owner did not allow further treatment and the dog became lost to follow-up at 2 months postoperatively. In case 2, there was no clinical or radiographic evidence of a local recurrence or distant metastasis at 3 weeks after surgery. The owner informed that the dog died suddenly with no signs of anything particularly wrong at 7 weeks after surgery.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.418-435
• /
• 2001

Root canal preparation process is of utmost importance in successful treatment of root canal. Also, one of the most important purpose of the root canal preparation is to enlarge the root canal three dimensionally without changing the curvature of the root canal However as the curvature of the root canal increases, there are many difficulties involved in formation of optimum root canal. Therefore in order to solve the above mentioned problems, new developments in methods of root canal preparation and equipments for such purposes were made. Recently, vigorous studies about newly introduced engine-driven nickel-ti-tanium rotary file are conducted. As shown in research results to dates, it is well established that the use of nickel-titanium file is better suited for curved root canal than stainless steel file in maintaining the curvature or root canal and reducing the deformation of root canal. However it is also acknowledged that there are a few discrepancies in research results according to protocol, due to failure to remove variables in experiments. In addition, although it is recommended by the manufacturer that the GT rotary file should maintain a low rotational speed of 150~350rpm and 'light pressure' as light as not to break the lead of a pencil, academic studies about the vertical force which is not yet standardized are not sufficiently explored. Therefore, this research devised and utilized a special research equipment to standardize the appropriate range of vertical force for GT rotary file through experiments by breaking of the lead of a pencil as expressed by the manufacturer and to accurately measure factors involved through repeating and recreating the environment of root canal preparation. Forming nine experimental groups by varying the vertical forces (150g. 220g, 300g) and rpm (150rpm, 250rpm, 350rpm), the effects of changing vertical forces and rpm on working efficiency were measured in terms of time expended in root canal preparation by crown-down method using a transparent resin block with 35 degree curvature and GT rotary file (z-test). The following research using this special research equipment that involved nine experimental groups and varying the vertical force for root canal preparation from 300g which is within the normal vertical force range to 700g and 1000g which fall outside the normal rpm range. The results were as follows : 1. Analysis of the experiment results revealed that the time spent in root canal preparation decreased as the vertical forces and rpm increased (p<0.05). Also, the effects of rpm were greater than those of the vertical forces within the normal vertical force range ($\beta$-weight test). 2. Observation of the deformation of GT rotary file revealed that deformation increases in a direct correlation with the vertical force increase and in a reverse correlation with the rpm decrease. In the case of the vertical forces close to the normal range, the probability of GT rotary file deformation were quite different depending on the rpm changes. In the case of greater vertical forces, the occurrences of deformation of the file were more frequent regardless of the rpm changes. 3. Deformation and breakage of file were also commonly observed in the expended time measurement experiments and GT rotary file deformation experiments in which low speed rpm (150rpm) was used and at the curved portion of the resin block.

• Journal of Veterinary Clinics
• /
• v.35 no.3
• /
• pp.71-76
• /
• 2018

In 22 dogs with medial patellar luxation (MPL) of grade 3 or lower, resection of the vastus medialis oblique muscle, patellar anti-rotational suture, fascia lata overlap, and tibial tuberosity transposition (TTT) were undertaken to stabilize the patella without trochleoplasty. Data including signalment, clinical symptoms, details of the affected hindlimb, preoperative and postoperative patellar luxation grades, postoperative recovery time, and postoperative complications were obtained from medical records. The grade of lameness was evaluated preoperatively and postoperatively. Mean (${\pm}SEM$) grade of medial patellar luxation was $2.64{\pm}0.11$ preoperatively and $0.2{\pm}0.27$ postoperatively. Mean (${\pm}SEM$) grade of lameness was $1.73{\pm}0.27$ preoperatively and $0.18{\pm}0.15$ postoperatively. Patellar reluxation occurred in 1 of 22 (4.5%) cases requiring additional surgery. At final follow-up, 2 of the 22 (9.0%) dogs, including one with reluxation, had occasional lameness. Client-based questionnaire results demonstrated significant improvements in all parameters. Surgical treatment of MPL that included resection of the vastus medialis oblique without femoral trochlear groove deepening improved surgical outcomes in dogs with up to grade 3 MPL.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.81-88
• /
• 2006

Present study is to know the relation with throwing speed according to the uniform torque by the shoulder joint, over 20 persons of professional baseball, and were measured the uniform torque by the shoulder joint accordance with throwing speed between (A-low speed) and (B-high speed) of each group. In the present study, three components were measured, and analyzed with having an approximated output value appearing by changing angular velocity, and in $30^{\circ}/sec$, the maximum strength of muscles was measured, and in$210^{\circ}/sec$, the points of endurance strength of muscles were measured and analyzed, and the following result could be obtained. 1. In muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 2 In the view of muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 3. In the view of muscles strength(peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that B group has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 4. In the view of peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 5. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $30^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 6. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $210^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. As conclusion, there did not appear a correlation of uniform torque by shoulder joint versus the speed throwing by a pitcher of professional base ball.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.91-97
• /
• 2007

The purpose of this study was to investigate the changes of various balls velocity under the different surface conditions after impact. For this study, four different balls were used which are golf ball, tang-tang ball, table tennis ball, and iron ball. And two different types of ground conditions were used which are artificial grass green and glass green. Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. To transfer the same amount of kinetic energy to the ball, pendulum putting machine was used. Analyzing the process of impact and the ball movement, a putter was digitized the whole movement but the ball was digizited within the 50cm movement. Velocities were calculated by the first central difference method(Hamill & Knutzen, 1995). Putter head velocities were about 112.2cm/s-116.2cm/s at impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Table tennis ball recorded higher ball velocities than the other ball velocities and iron ball recorded the lowest ball velocity in this group. But Table tennis ball was influenced with the frictional force and immediately was decreased at the artificial grass green condition. If an object is received the kinetic energy under the static condition(v=0cm/s), the object recorded the maximum velocity shortly after the impact and then decreased the velocity because of the frictional force. The ball distance from the start position to the peak velocity position is about 6cm-10cm under the 112.2cm/s-116.2cm/s putting velocity with putter. 0.25 seconds later after impact balls were placed 40cm distance from the original position except iron ball. In this study, ball moving distances were too short therefore it was not possible to investigate the reactions after the translational force is disappeared. Rotational force would play a major role at the end of the ball movement. Future study must accept two things. One is long distance movement of ball and the other is balanced ground. Three-piece ball is a good item to investigate the golf ball movement on the different surface conditions.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.42-47
• /
• 2007

To reduce the chattering errors of reed switch sensors in the automatic remote measurement of water meter a reed switch sensor was analyzed and improved. The operation of reed switch sensors can be described as a mechanical contact switch by approximation of permanent magnet piece to generate an electrical pulse. The reed switch sensors are used mostly in measurement application to detect the rotational or translational displacement. To apply for water flow measurement devices, the reed switch sensors should keep high reliability. They are applied for the electronic digital type of water flow meters. The reed switch sensor is just mounted simply on the conventional mechanical type flow meter. A small magnet is attached on a pointer of the water meter counter rotor. Inside the reed sensor two steel leaf springs make mechanical contact and apart repeatedly as rotation of flow meter counter. The counting electrical contact pulses can be converted as the water flow amount. The MCU sends the digital flow rate data to the server using the wireless communication network. But the digital data is occurred difference or won by chattering noise. The reed switch sensor contains chattering error by it self at the force equivalent position. The vibrations such as passing vehicle near to the switch sensor installed location causes chattering. In order to reduce chattering error, most system uses just software methods, for example using filter algorithm and also statistical calibration methods. The chattering errors were reduced by changing leaf spring structure using mechanical characteristics.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.123-140
• /
• 1985

Variation in the facial pattern and effect of the rotational jaw growth on the facial proportion were studied in serial cephalometric radiographs of 40 Korean children (25 boys, 15 girls) ranging in age from 6 to 13 years. According to Y-axis (N-S-Gn) growth change during the 7 years of period, the subject who had exhibited 'wave-like' manner of Y-axis growth change within ${\pm}\;2^{\circ}$ was classified to the Parallelwise group and the subject who had exhibited Y-axis increase more than $+2^{\circ}$ was classified to the Clockwise rotation group and the subject who had exhibited Y-axis decrease more than $-2^{\circ}$ was classified to the Counterclockwise rotation group. For the comparison of each group, a total of 22 morphologic variables were employed and the data were analyzed by means of computer morphometrics and statistical methods. On the basis of the finding of this study, the following trends were established. 1. The Parallelwise group was $75\%$, the Clockwise rotation group was $12.5\%$ and the Counter-clockwise rotation group was $12.5\%$. 2. The growth pattern of cranial base was related to the rotation of mandible. 9. Maxillary prognathism was occured in the Counterclockwise rotation group and the rotation of palatal plane was occured in the Clockwise rotation group. 4. Mandibular prognathism was occured in the Parallelwise and the Counterclockwise rotation groups, especially in the Counterclockwise rotation group. 5. The degree of maxillo-mandibular divergency was constant in the Clockwise rotation group but decreased in the Counterclockwise rotation and the Parallelwise groups, especially in the Counterclockwise group. 6. There were no differences in the size of the anterior upper facial height (N-ANS) and the posterior lower facial height ((Go-Me)-PNS) but there were differences in the size of the anterior lower facial height (ANS-Me) and the posterior upper facial height ((S-N)-PNS) between each group. 7. The growth increment and the size of the facial depth was not related to the growth pattern of the face but the growth increment and the size of the facial height was related to the growth pattern of the face. 8. Proportional change due to the facial growth rotation was concentrated in the anterior lower face. 9. The most apparent difference between each group was happened in the size of the posterior cranial base (S-Ba) and the facial length (S-Gn).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.329-334
• /
• 2017

The structures, which are made up with the huge number of degrees-of-freedom and the assembly of substructures, have a great complexity. In order to increase the computational efficiency, the analysis models have to be simplified. Many substructuring techniques have been developed to simplify large-scale engineering problems. The techniques are very powerful for solving nonlinear problems which require many iterative calculations. In this paper, a modal derivatives-based model order reduction method, which is able to capture the stretching-bending coupling behavior in geometrically nonlinear systems, is adopted and investigated for its performance evaluation. The quadratic terms in nonlinear beam theory, such as Green-Lagrange strains, can be explained by the modal derivatives. They can be obtained by taking the modal directional derivatives of eigenmodes and form the second order terms of modal reduction basis. The method proposed is then applied to a co-rotational finite element formulation that is well-suited for geometrically nonlinear problems. Numerical results reveal that the end-shortening effect is very important, in which a conventional modal reduction method does not work unless the full model is used. It is demonstrated that the modal derivative approach yields the best compromised result and is very promising for substructuring large-scale geometrically nonlinear problems.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.288-297
• /
• 2014

Dynamic conformal arc therapy (DCAT) and flattening-filter-free (FFF) beams are commonly adopted for efficient conformal dose delivery in stereotactic body radiation therapy (SBRT). Off-axis geometry (OAG) may be necessary to obtain full gantry rotation without collision, which has been shown to be beneficial for peripheral targets using flattened beams. In this study dose distributions in OAG using FFF were evaluated and the effect of mechanical rotation induced uncertainty was investigated. For the lateral target, OAG evaluation, sphere targets (2, 4, and 6 cm diameter) were placed at three locations (central axis, 3 cm off-axis, and 6 cm off-axis) in a representative patient CT set. For each target, DCAT plans under the same objective were obtained for 6X, 6FFF, 10X, and 10FFF. The parameters used to evaluate the quality of the plans were homogeneity index (HI), conformality indices (CI), and beam on time (BOT). Next, the mechanical rotation induced uncertainty was evaluated using five SBRT patient plans that were randomly selected from a group of patients with laterally located tumors. For each of the five cases, a plan was generated using OAG and CAG with the same prescription and coverage. Each was replanned to account for one degree collimator/couch rotation errors during delivery. Prescription isodose coverage, CI, and lung dose were evaluated. HI and CI values for the lateral target, OAG evaluation were similar for flattened and unflattened beams; however, 6FFF provided slightly better values than 10FFF in OAG. For all plans the HI and CI were acceptable with the maximum difference between flattened and unflattend beams being 0.1. FFF beams showed better conformality than flattened beams for low doses and small targets. Variation due to rotational error for isodose coverage, CI, and lung dose was generally smaller for CAG compared to OAG, with some of these comparisons reaching statistical significance. However, the variations in dose distributions for either treatment technique were small and may not be clinically significant. FFF beams showed acceptable dose distributions in OAG. Although 10FFF provides more dramatic BOT reduction, it generally provides less favorable dosimetric indices compared to 6FFF in OAG. Mechanical uncertainty in collimator and couch rotation had an increased effect for OAG compared to CAG; however, the variations in dose distributions for either treatment technique were minimal.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.441-448
• /
• 2016

The thrust force created by a propeller depends on the incoming flow velocity and the rotational velocity of the propeller. The performance of the propeller can be described by dimensionless variables, advanced ratio, thrust coefficient, and power coefficient. This study included the application of the immersed boundary lattice Boltzmann method (IBLBM) with the stereo lithography (STL) file of the rotating object for performance analysis. The immersed boundary method included the addition of the external force term to the LB equation defined by the velocity difference between the lattice points of the propeller and the grid points in the domain. The flow by rotating a 4-blade propeller was simulated with various Reynolds numbers (Re) (including 100, 500 and 1000), with advanced ratios in the range of 0.2~1.4 to verify the suggested method. The typical tendency of the thrust efficiency of the propeller was obtained from the simulation results of different advanced ratios. It was also necessary to keep the maximum mesh size ratio of the propeller surface to a grid size below 3. Additionally, a sufficient length of the downstream region in the domain was maintained to ensure the numerical stability of the higher Re and advanced ratio flow.